• The Journal of Engineering Geology
• /
• v.33 no.1
• /
• pp.189-200
• /
• 2023

As urbanization and industrialization increase development in downtown areas, damage due to ground settlement continues to occur. Building collapse in urban has a high risk of leading to large-scale damage to life and property. However, there has rarely been studied on measurement data analysis methods when uneven loads are applied to the excavated ground and no prior knowledge of the ground. Accordingly, it was attempted to analyze the relative settlement behavior and correlation by processing the time-series surface settlement of construction sites in the urban. In this paper, the average index of difference in settlement and average of relative difference in settlement are defined and calculated, then plotted in the coordinate system to analyze the relative settlement behavior over time. In addition, since there was no prior knowledge of the ground, a standard to classify the clusters was needed, and the observation points were classified into using k-means clustering and Dunn Index. As a result of the analysis, it was confirmed that all the clusters moved to the stable region as the settlement amount converges. The clusters were segmented. Based on the analysis results, it was possible to distinguish between the independent displacement area and same behavior area by analyzing the correlation between measurement points. If possible to analyze the relative settlement behavior between the stations and classify the behavior areas, it can be helpful in settlement and stability management, such as uplift of the surrounding area, prediction of ground failure area, and prevention of activity failure.

• Journal of Service Research and Studies
• /
• v.12 no.2
• /
• pp.23-37
• /
• 2022

Based on the service scenario proposed by the existing Kim Tae-wan (2018) who can safely evacuate inmates with the help of a mobile application linked to a fire detection system in the event of a fire, the final purpose of this study is to develop the scenario by incorporating more realistic scenarios with mobile stimuli that can help them escape or act through the Delph In addition, to make the scenarios produced more realistic considering the structure and copper lines of a typical building, expert scenario verification and Delphi technique were applied to exclude unnecessary or impractical aspects of the existing scenarios. The results of the second Delphi survey showed that the primary psychology that could be seen at the time of the fire alarm were doubts, safety concerns and alarm, and the results of the second Delphi survey were analyzed, and the satisfaction of the content adequacy (CVR), convergence, and consensus was derived. Finally, this was applied to create a scenario in which a mobile application was assisted to evacuate the fire response phase. This study will allow the use of methods to increase the evacuation rate of those who are in the event of a fire.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.2
• /
• pp.54-67
• /
• 2023

Mount Tai, with an elevation of 1,532 meters, has a reputation as ''The Most Revered of the Five Sacred Mountains (五嶽獨尊)", despite not being the highest mountain in China. A guidebook is a book or pamphlet that contains an introduction and description of specific activities or facilities, especially detailed and accurate information about scenic spots, which provide superior vistas to than other commercially publicized locations. The study aims to investigate Mount Tai's landscape characteristics by analyzing the landscape types and elements, the Kernel Density, the Mean Center and the Standard Deviational Ellipse of the landscape elements appearing in guidebooks introducing Mount Tai. The research results of this study are summarized as follows. First, the landscape type characteristics of Mount Tai are dominated by natural landscapes, which are different from what was shown highlighted in poems and Big Data as they proposed that the landscape characteristics of Mount Tai is dominated by human activities. Second, from the perspective of subdivided landscape types, the landscape elements that appeared in Mount Tai are topography, structure, architecture, plants, semantics, human beings and image orderly, based on the proportion of landscape elements. Third, from the perspective of landscape elements by times series, "Fengshan (封禅)", "sacrifices (祭祀)" and "legends" mostly appeared in the 1950s and 1980s, and after the 1990s, "climbing" and "overlooking" mostly appeared. Fourth, the landscape elements of Mount Tai are concentrated in Daiding (岱顶) and Dai Temple (岱庙) in all periods in terms of spatial distribution. This will become an important space for Mount Tai scenic spots in the future. Moreover, as a whole, the landscape elements of Mount Tai have changed from the concentrated distribution form in Mount Tai scenic spot to the scattered distribution form including Mount Tai and Tai'an City. This will provide necessary enlightenment for the landscape preservation and the re-production of guidebooks of Mount Tai scenic spot in the future.

• The Journal of the Acoustical Society of Korea
• /
• v.42 no.6
• /
• pp.565-571
• /
• 2023

With the introduction of the post-verification system, the measurement of floor impact noise performance on-site has become mandatory, and the evaluation method has changed. To track the performance changes since the policy implementation, research is needed on how the characteristics of heavyweight impact sound change according to the varied evaluation method. In this study, we analyzed the contribution rate of the frequency band-specific sound pressure level on the single-number quantity for a multi-family housing unit with the same floor plan and floor structure, comprising 59 households, based on the changed impact sources and evaluation indicators. It is difficult to compare simply because the method of calculating contributions by frequency band according to the single-day evaluation is different, but the average contribution rate of 63 Hz was 80.8 % in the evaluation method before the introduction of the post-confirmation system (Tire measurement and evaluated as L'_i,Fmax,AW), and the average contribution rate of 125 Hz was 19.2 %. The current evaluation method (rubber ball measurement and evaluation as L'_iA,Fmax) shows that the contribution rate has decreased to 33.1 % on average at 50 Hz ~ 80 Hz, 58.7 % on average at 100 Hz ~ 160 Hz, 6.9 % on average at 200 Hz ~ 315 Hz, and 1.3 % on average at 400 Hz ~ 630 Hz. This result is a case analysis for the target apartment house, and it is necessary to analyze measurement data for more diverse apartment houses.

• Journal of Cadastre & Land InformatiX
• /
• v.54 no.1
• /
• pp.75-87
• /
• 2024

There There is a difference in terms of administrative power in that the address of things are not an address under Public Act. In terms of location expression, it is possible to express the location more flexibly and in more detail than the road name address, so it should be improved so that it can be assigned and managed in an appropriate location, so that the location of the entire territory can be expressed together with the road name address. As a result of the comparison between the road name address and the address of things based on the analysis results of related laws such as the existing Road Name Address Act, the Building Act, and the Regulations on the Preparation and Management of Basic Address Information, it was confirmed that there are fundamental limitations of the address of things system. Accordingly, this study attempted to suggest ways to improve the address of thing system by broadly dividing it into the legal aspect and the addressable object aspect. From the legal point of view, firstly, it is necessary to improve the upper and lower level laws by unification together with a clear definition of the term subject of addressable object; secondly, according to the Building Act, facilities that are not used for residence among buildings must be given an address of thing; and thirdly, it is necessary to make it easy to use and link with heterogeneous public data by classifying the registration items of the basic address information map by type of geographical feature to be assigned an address. From the point of view of addressability, firstly, it must be given to all facilities in the relevant category so that it can be recognised that all specific facilities have object addresses, and secondly, it is necessary to be able to address the address of things to places that are used by many, even if there are no facilities.

• Land and Housing Review
• /
• v.15 no.2
• /
• pp.73-87
• /
• 2024

To evaluate the efficiency of commuting patterns, various commuting indicators such as excess commute and commuting potential utilized have been developed and used. It is crucial to calculate these indicators reasonably to reveal the differences in commuting patterns among metropolitan areas and to consider these in the process of formulating commuting policies. However, commuting indicators are generally calculated at the administrative district level, and thus, they are not free from the problem of the modifiable areal unit problem (MAUP). This issue can undermine the rationality of comparing commuting efficiency between metropolitan areas, making it necessary to handle the calculation of commuting indicators carefully. Therefore, this study utilises Monte Carlo Simulation to calculate optimal, actual, and maximum commuting distances, and thereby presents the excess commute and the commuting potential utilized. To apply Monte Carlo Simulation to the context of South Korea, a constrained Monte Carlo Simulation is conducted, where residential and workplace locations used in the simulation are selected based on the actual locations of buildings. The analysis is conducted on 13 metropolitan areas with established metropolitan plans using the 2016 Household Travel Survey data. The commuting indicators calculated through the simulation showed minimal differences compared to the results obtained through conventional methods. The comparison of commuting efficiency among metropolitan areas revealed that even if the degree of spafial balance between residential and workplace locations is similar, the actual commuting patterns can differ significantly. It is suggested that further research considering characteristics such as the area of each metropolitan region will be necessary in the future.

• Journal of the Korean Regional Science Association
• /
• v.40 no.2
• /
• pp.3-19
• /
• 2024

The purpose of this study is to analyze the impact of attracting a university campus on the local economies of small and medium-sized cities, focusing on changes in local commercial neighborhoods(such as the number of startups, closures, and stores counts). For this study, a Difference-in-Difference(DID) analysis was used to compare the period before and after the attraction of university campuses in four local small and medium-sized cities. These include the Yangsan Campus of Pusan National University, the Jincheon Campus of Woosuk University, the Taean Campus of Hanseo University, and the Dangjin Campus of Hoseo University. The comparison was based on the number of startups, closures, and store counts, using local data provided by the Ministry of the Interior and Safety. The main findings of the study are as follows. First, attracting a university campus has a positive impact on the number of startups, both spatially and temporally. The spatial factors for the number of closures and stores showed a decrease, while the interaction terms representing the period before and after attracting the university campus all indicated an increase. Second, the number of startups in cultural and food-related sectors increase, reflecting the new demand created by attracting the university campus. However, there was also an increase in the number of closures, indicating rapidly changing consumption trends among university students. Third, physical environmental factors such as the number of building floors, land use zoning, and officially assessed land prices have a significant impact on the number of startups, closures, and stores. This supports the assertion that attracting university campus have a positive impact on the revitalization of local commercial neighborhoods.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.37 no.2
• /
• pp.145-153
• /
• 2017

This study was aimed to find yield prediction model of Italian ryegrass using climate big data and geographic information. After that, mapping the predicted yield results using Geographic Information System (GIS) as follows; First, forage data were collected; second, the climate information, which was matched with forage data according to year and location, was gathered from the Korean Metrology Administration (KMA) as big data; third, the climate layers used for GIS were constructed; fourth, the yield prediction equation was estimated for the climate layers. Finally, the prediction model was evaluated in aspect of fitness and accuracy. As a result, the fitness of the model ($R^2$) was between 27% to 95% in relation to cultivated locations. In Suwon (n=321), the model was; DMY = 158.63AGD -8.82AAT +169.09SGD - 8.03SAT +184.59SRD -13,352.24 (DMY: Dry Matter Yield, AGD: Autumnal Growing Days, SGD: Spring Growing Days, SAT: Spring Accumulated Temperature, SRD: Spring Rainfall Days). Furthermore, DMY was predicted as $9,790{\pm}120$ (kg/ha) for the mean DMY(9,790 kg/ha). During mapping, the yield of inland areas were relatively greater than that of coastal areas except of Jeju Island, furthermore, northeastern areas, which was mountainous, had lain no cultivations due to weak cold tolerance. In this study, even though the yield prediction modeling and mapping were only performed in several particular locations limited to the data situation as a startup research in the Republic of Korea.

• KIPS Transactions on Computer and Communication Systems
• /
• v.1 no.3
• /
• pp.143-150
• /
• 2012

A simulation methodology and corresponding program based on it is to be discussed for analyzing the effects of the networking operation of existing DHC system in connection with CHP system on-site. The practical simulation for arbitrary areas with various building compositions is carried out for the analysis of operational features in both systems, and the various aspects of thermal energy grids with connecting operation are highlighted through the detailed assessment of predicted results. The intrinsic operational features of CHP prime movers, gas engine, gas turbine etc., are effectively implemented by realizing the performance data, i.e. actual operation efficiency in the full and part loads range. For the sake of simplicity, a simple mathematical correlation model is proposed for simulating various aspects of change effectively on the existing DHC system side due to the connecting operation, instead of performing cycle simulations separately. The empirical correlations are developed using the hourly based annual operation data for a branch of the Korean District Heating Corporation (KDHC) and are implicit in relation between main operation parameters such as fuel consumption by use, heat and power production. In the simulation, a variety of system configurations are able to be considered according to any combination of the probable CHP prime-movers, absorption or turbo type cooling chillers of every kind and capacity. From the analysis of the thermal network operation simulations, it is found that the newly proposed methodology of mathematical correlation for modelling of the existing DHC system functions effectively in reflecting the operational variations due to thermal energy grids with connecting operation. The effects of intrinsic features of CHP prime-movers, e.g. the different ratio of heat and power production, various combinations of different types of chillers (i.e. absorption and turbo types) on the overall system operation are discussed in detail with the consideration of operation schemes and corresponding simulation algorithms.

• Korean Journal of Heritage: History & Science
• /
• v.42 no.1
• /
• pp.88-99
• /
• 2009

This study was conducted to formulate management guidelines for Natural monumental old trees in Korea through survey of tree vigor and analysis of growing environments. A total of 20 old trees designated as natural monuments in Seoul, Incheon, and Gyeonggi Province were surveyed. The biological characteristics were surveyed with 4 items of species, ages and height of trees. The surrounding environments were surveyed with 2 items of location types and surroundings. The root conditions were surveyed with 2 items of denudation and molding depth. The health conditions were surveyed with 5 items of withering rate, cavity size, bark breakaway rate, damages by blight and insects, and growing tips. The soil conditions were surveyed with 6 items of PH, organic contents, valid phosphoric acid, transposal cations(K, Ca) and soil compaction. On the basis of outcomes of these research items, mutual relations among locations, growings and soil conditions of old trees were analyzed by carring out cross tabulation, correlation, and simple and multiple regression. Management guidelines were presented searching the factors effecting on the health of the monumental old trees. On the biological characteristics, the old trees designated as natural monuments were Pinus bungeana(4 trees), Juniperus chinensis(3 trees), Ginkgo biloba(3 trees), Poncirus trifoliata(2 trees). Actinidia arguta, Wisteria floribunda, Thuja orientalis, Quercus mongolica, Sophora japonica, Fraxinus rhynchophylla, Zelkova serrata, and Pinus densiflora. The tree height ranged from 4.2 to 39.2m, and root collar rounds ranged from 1.01 to 15.2m. On the surrounding environments, The location types ; Gardens(4), historical sites(5), residental sections(3) open agricultural fields(3), mountain hills(3), and near ocean beaches(1) and stream site(1). The surroundings ; 75% denudation of roots, molded more than 10cm except 4 trees(25%). On the health conditions, 1)Withering rate ; Ginkgo biloba(20%) in Yongmoon temple, (5%) in Saki-ri, kanwha-gun, and others had no withering rate. 2) Cavity size ; all subject had $5{\sim}100cm^3$ of cavity. 3) Bark breakaway rate ; Pinus bungeana in Soosong-dong, in the shrine of Confucius, in Samchung-dong, especially high rate of cavity(5~50%) in Seoul area and in Saki-ri, Kangwha-gun were high 45% brakeaway rate. 4) Damages by blight and insects was slight due to managements. 5Growing tips ; In cases of Juniperus chinensis in Changdeok palace and SunnogDang, seoul, growing tips were 1/2, presumably cause by air pollution, and in cases of Fraxinus rhynchophylla in Paju city and Pinus densiflora in BacksaDorip-ri, Icheon city, growing tips were fine, presumably because there were no moldings. On the Soil conditions, Soil pH ranged from 5.2 to 8.3, organic matter contents from 12% to 56%, phosphorus contents from 104 to 618ppm, soil compaction ranged from 7 to 28mm( among them, Denudation was severe with 21~28mm soil compactions in cases of Pinus bungeana in Soosong -dong, Thuja orientalis in Samchung -dong, Ginkgo biloba in the shrine of Confucius and in Yongmoon temple.) Results of cross tabulation, correlation, and regression analysis showed that molding depth was the most serious factor to deteriorate the tree vigor and cambium conductivity. In addition, soil acidity, organic matter contents, disease and insect damages and cambial detachment were also related to the tree vigor. Additional research of these relationships will be needed to conduct more detailed studies. Based on the relationships between the tree vigor and growing environments, it is considered that old trees should be managed to give them more growing spaces and less abuses. Also, molded soils should be removed and further soil-molding around the tree collar should be prohibited. For the construction of systematic management and removal of harmful factors, appropriative management according to spices, persistent monitering of damaged cases and construction of management system through the accumulation of data on the relationships of soil conditions are required.