• 방재와보험
• /
• s.131
• /
• pp.11-13
• /
• 2009

초고층 건물은 그 높이에 비례하여 복잡성이 증가하므로 소방 측면에서도 다양한 문제들이 발생하게 된다. 초고층 건물은 건물 이용자의 인원 수, 재산가치, 사고 시 사회에 미칠 파장 등으로 인해 높은 수준의 화재안전대책이 요구된다.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2010.09a
• /
• pp.87-92
• /
• 2010

아름다운 자연경관은 인구의 도시집중과 토목 건축 기술 기반의 도시공간구조 다양화로 자연경관은 그 모습을 잃어가고 있다. 이러한 변화 이변에는 자연경관의 보존에 대한 도시민의 욕구가 날로 증가하고 있어 경관자원의 보전 및 보호를 위한 체계가 필요한 실정이다. 체계적이고 종합적인 경관관리로 도시민들에게 우수한 경관을 제공하기 위해서는 경관의 변화 정도를 정량적이고 객관적으로 측정하고 모니터링 할 수 있어야 한다. 따라서 본 연구에서는 건물배치 및 높이에 따른 산림녹시율을 3D GIS기반에서 분석하여 산림녹시율이 인간에게 미치는 영향을 규명하고자 한다.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.12 no.1
• /
• pp.41-48
• /
• 1992

This experiment was carrid out to determine the effect of cutting height and nitrogen level on dead stubble, tiller and branch new shoot dry matter yield and total dry matter of sorghum-sudangrass hybrid{Sorghum bicolor (L.) Moench}.The main treatment was four cutting height(5cm, IOcm, 15cm, 20cm), and the sub treatment was three nitrogen level(l50kg, 250kg, 350kglha).The experiment was performed at the Collage of Natural Science of Kon-Kuk University at Chungju in 1988. 1. Plant length tends to increase in the high cutting height and high N level. Especially, the difference of plant height was significant in warm season. 2. The number of dead stubble after cutting was significantly(P

• 한국공간정보시스템학회:학술대회논문집
• /
• 2007.06a
• /
• pp.127-132
• /
• 2007

위성영상 기술의 발달과 고해상도 위성영상의 해상도 규제가 완화됨에 따라 건물의 높이 정보를 획득하는데 있어 고해상도 위성영상의 그림자 정보를 이용하는 연구들이 활발히 수행되어지고 있다. 그림자 정보를 이용하여 건물 높이 정보를 획득하는 연구의 정확도를 높이기 위해서는 정확한 건물의 그림자 탐지가 선행되어야 한다. 따라서 본 논문에서는 단영상을 이용한 그림자 탐지기법인 임계값법(Thresholding), 영상분류법, 영역확장법(Region Growing)을 건물의 그림자 탐지에 적용하여 각 기법의 장단점과 정확도를 평가하였다. 영상에서 수동으로 건물의 그림자를 디지타이징한 참조 자료와 기법들을 적용하여 탐지한 결과 영상을 시각적으로 비교하였고, 오차행렬(Confusion Matrix)을 이용한 전체정확도(Accuracy), F-measure, AOR(Area Overlap Ratio)을 이용하여 정량적인 정확도평가를 수행하였다. 실험결과 영역확장법을 적용한 경우 시각적 정량적으로 가장 높은 정확도를 보였으며, 영상분류법을 적용한 경우 시각적으로는 임계값을 적용한 경우보다 좋은 결과를 보였으나 정량적으로는 가장 낮은 정확도를 보였다.

• Korean Journal of Remote Sensing
• /
• v.33 no.6_2
• /
• pp.1151-1157
• /
• 2017

Street Trees is an important object for urban environment improvement. Especially the height of the trees needs to be precisely measured as a factor that greatly influences the removal of air pollutants in the Urban Street Canyons. In this study, we extracted the height of the tree based on the stereo image using the precisely adjusted UAV Images of the target area. The adjustment of UAV image was applied photogrammetric SfM (Structure from motion) based on the collinear condition. We measured the height of the trees on the Street Canyon using stereoscopic vision on stereo plotting system. We also acquired the height of the building adjacent to the street trees and the average height of the road surface was calculated for accurate measurement of the height of each object. Through the visual analysis with the plotting operation system, it was possible to measure height of the tree and to calculate the relative height difference value with building quickly. This means that the height of buildings and trees can be calculated without making a 3D point cloud of UAV and it has the advantage of being able to utilize non-experts. In the future, further studies for semiautomatic/automation of this technique should be performed. The development and research of these technologies is expected to help to understand the current status of environmental policies and roadside trees in urban areas.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.5
• /
• pp.340-352
• /
• 2011

This study was carried out to analyze the change of wind filed and heat island according to the location of the high rise building using micrometeorology numerical model Envi-met3.0. In this study, the real urban planning of Jeonju city was used as input for the location and height of buildings. Modeling was performed for two conditions as input data. Case 1 is that wind direction is SSE and case 2 is W. To analyse the change of wind filed, wind speed results were used. To analyze the change of heat island, temperature results were used. Below the building height, wind speed increased 0.2~2.5 m/s at the inflow area and decreased 0.5~2.0 m/s at the area between the buildings. Above the building height, wind speed decreased 0.1~0.8 m/s near the building complex. On the other hand, wind speed increased 0.2~0.4 m/s in the outside area of the building complex. In the case of temperature, below the building height, temperatures increased $0.01{\sim}0.1^{\circ}C$ in the building complex and leeward area. On the other hand, temperature decreased $0.01{\sim}0.005^{\circ}C$ in the outside area of the building complex. Above the buildings height, temperatures decreased $0.05{\sim}0.2^{\circ}C$ in most of the area.

• Journal of the Korea Convergence Society
• /
• v.12 no.9
• /
• pp.153-159
• /
• 2021

In this study, basic data that can be referenced for ventilation modeling was presented by analyzing the characteristics of wind pressure coefficients(Cp) according to wind direction angles under conditions of different building layouts and aspect ratios through CFD (Computational Fluid Dynamics) analysis for flat-type apartment complexes. In the case of a wind direction angle of 0°, Cp distribution in the form of an inverted S-shape was shown on the front of the building located on the windward side. And Cp corresponding to the lowest floor, the uppermost floor, and the two inflection points showed relatively close values regardless of the height of the building. The inflection point of the low-rise part was formed at a height of about 11m, and the height of the high-rise part could be calculated through a trend formula proportional to the height of the building. It was confirmed that the averaged Cp value can be applied in most conditions except for the wind direction angle of 45 degrees.

• Korean Journal of Remote Sensing
• /
• v.39 no.5_4
• /
• pp.1097-1109
• /
• 2023

Urban is an area where small-scale changes to individual buildings occur frequently. An existing urban building database requires periodic updating to increase its usability. However, there are limitations in data collection for building changes over a wide urban. In this study, we check the possibility of detecting building changes and updating a building database by using satellite images that can capture a wide urban region by a single image. For this purpose, building areas in a satellite image are first extracted by projecting 3D coordinates of building corners available in a building database onto the image. Building areas are then divided into roof and facade areas. By comparing textures of the roof areas projected, building changes such as height change or building removal can be detected. New height values are estimated by adjusting building heights until projected roofs align to actual roofs observed in the image. If the projected image appeared in the image while no building is observed, it corresponds to a demolished building. By checking buildings in the original image whose roofs and facades areas are not projected, new buildings are identified. Based on these results, the building database is updated by the three categories of height update, building deletion, or new building creation. This method was tested with a KOMPSAT-3A image over Incheon Metropolitan City and Incheon building database available in public. Building change detection and building database update was carried out. Updated building corners were then projected to another KOMPSAT-3 image. It was confirmed that building areas projected by updated building information agreed with actual buildings in the image very well. Through this study, the possibility of semi-automatic building change detection and building database update based on single satellite image was confirmed. In the future, follow-up research is needed on technology to enhance computational automation of the proposed method.

• Journal of the Korean Society for Environmental Technology
• /
• v.19 no.6
• /
• pp.528-535
• /
• 2018

In this study, the effect of obstacle aspect ratio on vortex in building canyon was numerically investigated using a computational fluid dynamics(CFD) model. The sensitivity experiments were performed in the cases of increasing building length(L) and height(H) by the width(W) of building canyon. The wind vector fields and secondary reverse vortex in building canyon were discussed in this study. For the horizontal vortex, the vortex zone increased as the building length increases, but the vectors at the middle of building canyon began to change in the case of L/W=2.5. In the case of L/W=3.0, the smaller primary vortex was presented with the secondary reverse vortex. For the vertical vortex, the vortex zone increased as the building height increases, but the direction of vectors at the bottom of building canyon began to change in the case of H/W=2.5. In the case of H/W=3.5, the smaller primary vortex was presented with the secondary reverse vortex.

• Korean Journal of Remote Sensing
• /
• v.29 no.5
• /
• pp.499-508
• /
• 2013

This article presents a new method for semi-automatic extraction of building information (height, shape, and footprint location) from monoscopic urban scenes. The proposed method is to expand Semi-automatic Volumetric Shadow Analysis (SVSA), which can handle occluded building footprints or shadows semi-automatically. SVSA can extract wrong building information from a single high resolution satellite image because SVSA is influenced by extracted shadow area, image noise and objects around a building. The proposed method can reduce the disadvantage of SVSA by using multi-spectral images. The proposed method applies SVSA to panchromatic and multi-spectral images. Results of SVSA are used as parameters of a cost function. A building height with maximum value of the cost function is determined as actual building height. For performance evaluation, building heights extracted by SVSA and the proposed method from Kompsat-2 images were compared with reference heights extracted from stereo IKONOS. The result of performance evaluation shows the proposed method is a more accurate and stable method than SVSA.