• Magazine of the Korea Concrete Institute
• /
• v.11 no.1
• /
• pp.109-118
• /
• 1999

Seismic design code has been performed since 1988 in Korea, so it has not been applied to low-rise reinforced concrete buildings which had been built before 1988. Those building have been designed only for gravity loads based on non-seismic code, Therefore, even minor earthquake occurred, those buildings might have serious damages. In this paper, to investigate the behavior of low-rise reinforced concrete moment resisting frame which had been built in according to the building code of Korea that had been published before 1988, two type of 1/2 scaled exterior beam-column subassemblies which have non-seismic detailing based on the building code of Korea were constructed and tested with reversed cycling loading under the displacement control method. The special features of joint with non-seismic detailing is that there is no transverse reinforcement in the joint. In tests, cracks pattern, strength degradation, loss of stiffness, energy dissipation and the slippage of beam and column bars were investigated. Cracks did not occurred in the joint even seismic loading of 0.12g which is considered as peak ground acceleration in Korea was applied. And increasing seismic loading above 0.12g shear crack happened in the joint which have not transverse beam.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12A
• /
• pp.1883-1890
• /
• 1999

Wireless communication in an urban area, the accurate prediction of wave propagation characteristics are very important to determine communication service areas, select optimal base-stations, and design cells, etc. The CCIR model is a propagation prediction model using a shadowing by the buildings in an urban area. This model represent the shadowing rate by the means of the effect of shadowing between base-station and mobile unit in a shaped linear plane. But, This one occurred a lot of prediction error because it did not consider that density area by the buildings and terrain configurations by the hill and mountain on Line-Of-Sight. In this thesis, an improved propagation prediction model is proposed to reduce prediction error. We presents a new equation, which is using the SAS. This equation is associated with the shadow height by the buildings that considers the topology and the number of blocks that can affect the building shadow in the Line-Of-Sight. We measure the received electrical field level of base-station that high density area, medium density area, and low density area, and then compare and analysis the result to prediction of CCIR model and proposed model. The result compared with the measurement, the proposed model has the improvement of 9.71dB in a high density area, 9.66dB in a medium density area, and 4.02dB in a low density area better than the CCIR model. The result compared with the measurement, the proposed model has the improvement of 9.71dB in a high density area, 9.66dB in a medium density area, and 4.02dB in a low density area better than the CCIR model.

• Journal of Energy Engineering
• /
• v.21 no.2
• /
• pp.168-178
• /
• 2012

The objective of this study is applied to office buildings to evaluate quantitative evaluation method about performance of double-skin at design stage to establish the basis for the purpose of evaluation performance. Select the evaluation building about design plan for applying the double-skin using the dynamic heat load analysis program the annual heating and cooling load of before and after the double-skin. Using CFD to analyze wind factor and applied ventilation for realistic results. Effects of double-skin to apply, and control techniques that can be done more realistically proposed through to set and control for shade control mode of ventilator and inside cavity wall of double-skin. Apply for the building the double-skin due to interpretation of the annual heating and cooling loads applied to interpret the quantitative effect confirmed the possibility. According to the form of a double skin was confirmed cavity environmental changes.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.23 no.4
• /
• pp.293-298
• /
• 2003

Livestock manure have been utilized as fertilizer, and trying to make resources natural circulation of organic materials. This experiment was carried out to investigate the effect of swine slurry on production and nutritive value of rye, and to determine optimal application level for 2 years from Oct. 2000 to May 2002 in the experimental field of Grassland and Forage Crops Division, National Livestock Research Institute. Summary of the results were as follows. The application of swine slurry 200% Plot showed the best regrowth after winter and lodging was severe in all plots except non-fertilized plot. Plant height was lower in lodging plots. The dry matter yield was not significantly difference between chemical fertilizer(CF) plot and swine slurry application plots, and swine slurry 100% + CF 50% plot showed the highest yield among manure application plots. The dry matter yield per input nitrogen was 80kg in CF, 81kg in swine slurry 100% application plot. Above the level, it was decreased severely by 41 ∼ 61kg. Conclusively, application to swine slurry 100% showed superior productivity considering the DM yield per input nitrogen, That level would be recommended to produce higher yield and to conserve environment.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.34 no.4
• /
• pp.1-13
• /
• 2016

The Back garden in Wanggung-ri Site, Iksan clearly presents an aspect of the landscape gardening techniques of the Baekje, which are significantly unique in the landscape gardening history of East Asia as the structure connected to the main garden through a complex waterway system on a hill. The rear garden has a complex waterway system comprising a large inverted U-shape waterway and its branch waterways, sinuous waterway and water catchment system to enhance the landscape effect with a minimum amount of water on a hill, reducing damage by floods in the case of heavy rain and securing the amount of water required by the main space in the palace. A landscape element using various kinds and sizes of oddly shaped rocks decorated the water catchment area inside or around the large inverted U-shape waterway. On the top of the hill, the center in the Back garden, a building site in the size of 4 Kans each on the front and side was made on a square base surrounded by a round base stone. The building was identified on a space partially surrounded by the rectangular stonework on the left and right slope of the hill. While the functions and roles of the rectangular stonework are not accurately identified due to the poor conditions of the present site, the stonework may be related to the building inside it. The back garden in Wanggung-ri Site, Iksan has a winding pond-shaped waterway to pull or push water into or out of the garden in a rectangular pond shape, which was a conventional landscape gardening technique during the Baekje period. Since the main garden and the back garden in Wanggung-ri Site, Iksan form a systematic connection system, this paper tried to newly establish the main garden inside Iksan Wanggungseong as the 'royal garden'.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.4
• /
• pp.26-49
• /
• 2018

The purpose of this study was to verify the reliability of the solar radiation model and discuss its applicability to the urban area of Seoul for summer heat stress mitigation. We extended the study area closer to the city scale and enhanced the spatial resolution sufficiently to determine pedestrian-level urban radiance. The domain was a $4km^2$ residential area with high-rise building sites. Radiance modelling (SOLWEIG) was performed with LiDAR (Light Detection and Ranging)-based detailed geomorphological land cover shape. The radiance model was evaluated using surface energy balance (SEB) observations. The model showed the highest accuracy on a clear day in summer. When the mean radiation temperature (MRT) was simulated, the highest value was for a low-rise building area and road surface with a low shadow effect. On the other hand, for high-rise buildings and vegetated areas, the effect of shadows was large and showed a relatively low value of mean radiation temperature. The method proposed in this study exhibits high reliability for the management of heat stress in urban areas at pedestrian height. It is applicable for many urban micro-climate management functions related to natural and artificial urban settings; for example, when a new urban infrastructure is planned.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.2
• /
• pp.150-165
• /
• 2013

This study aims to investigate the original position, the writer of signboard handwriting and the period of Wibongmun and Joyangru in order to restore Wibongmun and Joyangru which have been designated as tangible cultural properties (有形文化財). They also have to be moved in the Gangwon Provincial Office. Wibongmun and Joyangru were established as government offices in chuncheon(春川官衙) and they were used as attached buildings in Chunceon (春川離宮) in 1890. Wibongmun was moved to Gangwon Provincial Office 5 times and Joyangru was moved twice. In order to move them back to the original place, by using the topographic map made by the Japanese Government-General in Korea, we find out Joyangru was located in the exit of Gangwon Provincial Office and greenhouse and we also figure out Wibongmun was located in the garden. While we study historical evidence on handwriting, we also find out the handwriting of Joyangmun was written by Songhaong (松下翁) Jo, Yun-Hyeong (曺允亨). Especially, Joyangru had played a role as a government office and it may be called 'Joyangru' after reconstructing 'Joyangmun' when attached buildings were established. Through this study, we found that the first period and reason of establishing Wibongmun and Joyangru was at least before 1788. Through this study, we can find the period of both and its historic meaning more clearly.

• Korean Journal of Heritage: History & Science
• /
• v.42 no.2
• /
• pp.110-133
• /
• 2009

This study is on the types and characteristics of foundation and basestone which can be seen in remains of Baekje and Silla in beginning study of them in ancient Korean architecture. This is a close investigation that division of the shape of the basestone and the type of Jeoksim(積心, the supporting part under the basestone) and foundation under the ground. Also it can be seen that the difference of construction technique and the relation with each part. The research objects are the remains of temples which had been excavated or are been excavating now in Baekje area and in Silla from 6th to 8th century. Results of research published in north Korea are quoted for the remains in Goguryeo being unable to be seen as they are in north Korea. If it had been possible to visit the sites, the materials would have been collected from the direct investigation. Otherwise they are collected from the excavaion results published. After that the basestone and the foundation could be divided according to several types. Also each types can be compared and studied according to times and building use. The results are follows. There are some different characteristics between Baekje and Silla in the technique of foundation, jeoksim, and basestone. Through them it is possible that the arhitectural technique of Baekje had been introduced to not only wooden pagoda in the erection of hwangryongsa temple. These results are considered limited in a few remains grasped the characteristics so it should be complemented continuously as the outcome of excavation of architectural remains will be accumulated to.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.40 no.2
• /
• pp.91-108
• /
• 2022

In most cases, optical images have been used as training data of DL (Deep Learning) models for object detection, recognition, identification, classification, semantic segmentation, and instance segmentation. However, properties of 3D objects in the real-world could not be fully explored with 2D images. One of the major sources of the 3D geospatial information is DSM (Digital Surface Model). In this matter, characteristic information derived from DSM would be effective to analyze 3D terrain features. Especially, man-made objects such as buildings having geometrically unique shape could be described by geometric elements that are obtained from 3D geospatial data. The background and motivation of this paper were drawn from concept of the intrinsic image that is involved in high-level visual information processing. This paper aims to extract buildings after classifying terrain features by training DL model with DSM-derived information including slope, aspect, and SRI (Shaded Relief Image). The experiments were carried out using DSM and label dataset provided by ISPRS (International Society for Photogrammetry and Remote Sensing) for CNN-based SegNet model. In particular, experiments focus on combining multi-source information to improve training performance and synergistic effect of the DL model. The results demonstrate that buildings were effectively classified and extracted by the proposed approach.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.2
• /
• pp.30-47
• /
• 2022

This study analyzed the characteristics of cold air flow according to spatial types in urban areas of Changwon-si, Gyeongsangnam-do. The spatial types were classified by cluster analysis considering the land use map, building information, and topographic characteristics produced on the Changwon biotope map. The amount of cold air and wind speed were derived by KLAM_21 modeling. As a result, spatial types were classified into a total of 14 types considering the density and height of buildings, land use types, and topographic characteristics. Cold air flow was found to generate cold air in the valley of the forest area outside urban area, move through roads and open spaces, and accumulate in the low-lying national industrial complex, and then spread cold air throughout the urban areas. There was a lot of cold air flow in the tall building area, and the cold air accumulation was less in the slope and ridge areas. The results of this study were able to understand the characteristics of cold air flow according to building density, land use type, and topography, which will be usefully used as basic data for urban wind road construction to mitigate climate and improve air quality in urban areas.