• Journal of The Korean Society of Grassland and Forage Science
• /
• v.24 no.2
• /
• pp.145-154
• /
• 2004

The objective of this experiment was to suggest the optimum cutting height for turf type mixtures{Kentucky bluegrass(Newport) 40％ + tall fescue(Rebell Jr) 20％ + perennial ryegrass (Palmer Ⅱ) 10% + redtop(Barricuda) 10％ + red fescue(Salem) 10% + creeping bentgrass(Crenshaw) IO%}. The fields trials were conducted from 1998 to 2001 at Chungnam National University in order to evaluate the dry matter yield and quality on the cutting heights(3, 4, and 5cm). With increasing the cutting height, the average DM yields of turf type mixtures over 3-year significantly increased, therefore the average total DM yields were obtained 11,158, 12,143 and 13,181㎏/ha at cutting height 3, 4 and 5cm(p<0.05), respectively. The CP content and OMO decreased(p<0.05), whereas the fiber contents slightly increased with increasing the cutting height. The average CPDM and DDM yields were obtained 2,012 and 8,621㎏, 2,097 and 9,461㎏, and 2,298 and 9,951㎏ at cutting height 3, 4, and 5㎝(p<0.05), respectively. The botanical compositions of Kentucky bluegrass and tall fescue were maintained high as 30 ∼ 36％, but that of perennial ryegrass was maintained low as 10-15%. Most of other species were low, but redtop and creeping bentgrass among the other species made up 8∼10％ and 7 ∼ 8% of botanical composition at the last 6th cutting time in 2001, respectively. In general, the level of cutting height of turf type mixtures was not more closely associated with botanical composition. The results of this experiment indicated that a 5㎝ of cutting height of turf type mixtures sown by extensive method would seemed adequate.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2012.11a
• /
• pp.165-166
• /
• 2012

A thermal stresses by heat of hydration was analyzed according to a change of a pour height in reactor containment building. In case of more than 3.6m pouring height a crack index by heat of hydration analysis resulted in less than 1 because there is not a construction joint of vertical direction and for a self-restraint effect of circumferential section shape. Therefore detailed consideration on a mixture proportion of binder type, quantity in concrete and selection of a form in seasonal air temperature is needed for a control of tensile stress by heat of hydration.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.4A
• /
• pp.238-246
• /
• 2003

In this paper, we will provide a comprehensive review of radio propagation measurements conducted to date for mobile radio systems at frequency bands used for cellular and personal communications services in microcellular systems. Path-loss results were measured by using narrowband signal and multipath propagations were characterized by wideband measurements. This paper includes unpublished empirical path loss formulas for Oakland city of non-uniform building heights, and presents a comparison with path loss formulas obtained from typical low-rise building environments in order to discuss street grid dependence on route-specific building profile. We will also compare some empirical models developed based on the measurements with a few well-established theoretical prodiction models.

• Journal of the Korean housing association
• /
• v.14 no.6
• /
• pp.51-58
• /
• 2003

When apartment buildings are builed and re-builded, they tends to be taller. This tendency causes the problems for solar access and view in the neighboring area. So the impact factor of sunlight and view by apartment building in its neighboring area is examined. The results of this study are as follows： When analyzing sky view by dividing the sky vault into the differential area, the analysis of view can be efficient. The shorter the apartment building, the more the continuous solar access time. And the taller the building, the more the accumulated solar access time. As the height of building is taller and it is farther from the border of apartment building, view ratio, sky view ratio, and form ratio are increased. It implies that the slimmer the building, the more the visual environment can be improved.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.161-165
• /
• 2011

본 논문에서는 고유진동수 조절이 가능한 새로운 형태의 액체댐퍼를 개발하였다. 동조댐퍼는 구조물의 설계단계에서 응답평가를 통해 필요성이 요구된다. 건물은 설계단계에서 고유진동수와 시공 후 고유진동수가 상이하다. 액체댐퍼의 형태는 설계단계에서 건물의 고유진동수를 동조시킬 수 있도록 설계되기 때문에 고유진동수가 고정이 될 수 있다. 본 연구에서는 제안한 댐퍼의 전체적인 형태는 기존의 Liquid Column Vibration Absorber(LCVA)와 같다. 기존의 LCVA는 시공 후 건물의 고유진동수에 동조시키기 위해 물높이를 조절하나 층고 때문에 제한이 있다. 우리가 제안한 새로운 형태의 액체댐퍼는 물높이 조절 뿐 아니라 수직관의 면적을 조절하여 고유진동수를 조절 할 수 있도록 개발하였다. LCVA의 수직관을 일정한 면적의 독립된 셀로 나누었으며 이 셀을 각각 밀폐시킬 수 있도록 하였다. 밀폐된 셀 안으로는 공기압력에 의해 물이 차지 않고 차 있는 물도 움직이지 않게 된다. 밀폐된 셀의 개수를 조정하여 수직관의 면적이 조절하여 고유진동수를 변화시킬 수 있다. 제작된 액체댐퍼의 밀폐된 셀 개수를 조절하여 진동대 실험을 통해 댐퍼의 고유진동수를 파악하였다. 실험으로 나온 고유진동수와 이론적으로 산정한 고유진동수를 비교하여 댐퍼의 사용성을 평가하였다. 개발된 액체 댐퍼의 수직관의 면적 조절을 통해 고유진동수 조절이 용이하여 실제로 사용이 가능함을 확인할 수 있었다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.14 no.3 s.37
• /
• pp.13-22
• /
• 2006

Realistic 3D building construction in urban area has become an important issue because of increasing demand of 3D geo-spatial information in many application. Contrary to the conventional 3D building model construction approach using aerial images and high-resolution satellite imagery, it has been researched widely in building reconstruction using high-accuracy aerial LIDAR data in the latest. This paper presents a method for 3D building construction through building outlines extraction by LoG operator's Zero-crossing and line generation and refinement by Douglas-Peucker algorithm.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.6
• /
• pp.16-24
• /
• 2017

The purpose of this paper is to search the optimal location of offset outrigger system in high-rise building after a structural schematic design of 80 stories building was conducted, making use of MIDAS-Gen. In this research, the key factors of analysis study were column stiffness, outrigger position in plan and outrigger location in height. For the aim of finding out the optimum position of offset outrigger system in tall building, we studied the lateral displacement in top floor which is the very essential variables in the structural design of high-rise building. The results of study showed that the column stiffness, the outrigger location in plan and outrigger location in height had an effect on the optimal position of outrigger system. Also, it is indicated that the research results can be useful in acquiring the structural design materials for seeking the optimum position of offset outrigger system in tall building.

• Journal of Wetlands Research
• /
• v.20 no.1
• /
• pp.14-19
• /
• 2018

In this study, the method considering the influence of the high-rise building in urban rainfall-runoff analysis using SWMM was proposed. The method proposed in this study was to calculate the time of reaching the surface of the rainwater considering the size and height of the building, and to modify the basin width to reflect this. In the method proposed in this study, the concentration time considering the size and height of the building is calculated and based on this time the basin width is modified. The proposed method was verified with the experimental result of Isidoro et al. (2012). As a result, the proposed method was found to be valid since the simulated hydrograph was fairly identical to experimental result. In both hydrographs, it was confirmed that the change of the discharge characteristic, such as decrease of peak discharge and lag of peak time, over increasing density of the building was similar each other.

• 방재와보험
• /
• s.104
• /
• pp.59-61
• /
• 2004

이 글은 NFPA Journal 2004년 5, 6월호에 수록된 John Nicholson의 글로, 엠파이어 스테이츠빌딩 높이보다 길고, 30m가 넘는 천장을 가진 건물에서 최적의 안전대책을 어떻게 수립할 것인가를 설명한다.

• Journal of Korean Society for Geospatial Information Science
• /
• v.7 no.1 s.13
• /
• pp.75-86
• /
• 1999

Three dimensional city model is composed of man-made and natural features, among these, most of man-made features are buildings. Therefore, it is very important to extract the building informations accurately and promptly to update the existing database. To achieve this, DTM can be reconstructed using building Information which is extracted from DTM, then this can be used as three dimensional city model. Thus, this paper aims to extract building boundaries and heights from high resolution DTM and edge informations of aerial photograph using mathematical morphology and image segmentation. We found that it is possible to extract buildings using opening operation in mathematical morphology and to improve the accuracy of building extraction using edge informations from aerial photograph.