• Journal of Periodontal and Implant Science
• /
• v.24 no.1
• /
• pp.131-143
• /
• 1994

For maintenance of exposed implant in healthy state, it is necessary to treat the surface of implant fixture and provide the surface adjustable to surrounding tissues. Variable techniques have been introduced such as citric acid and air-abrasive system to treat the failed implant. Although when the rough surface of HA coated implant was exposed to oral environment, the surface treatment method with citric acid or air-abrasive system is effective for removal of bacterial endotoxin, it is unsuccessful to prevent plaque deposition due to difficulty in removal of rough surface of HA coated implant. Thus, in this study the method that removes bacterial endotoxin and makes smooch surface without alteration of surface characteristics was studied. HA coated disc manufactured by IMZ Co. Was treated with high speed diamond bur, low speed diamond bur, stone bur, rubber point, jetpolisher. And then its surface state was examined with profilometer and SEM to evaluate the surface smoothness, and its surface component was analyzed with EDX to evaluate wheter the surface characteristics were altered or not. As a result, following results were obtained. When the surface roughness of each implant disc was measured by profilometer, the group I showed a $R_{max}\;2.11{\mu}m$ and the group II, III, IV, V showed a $R_{max2}\;4.17{\mu}m$, $7.28{\mu}m$, $8.61{\mu}m$ and $39.44{\mu}m$ respectively. That is, surface smoothness was highest in the group I and it has been gradually decreased in the group II, III, IV and V. Under the SEM examination, the group I showed relatively smooth surface and the group II showed slightly rougher surface than the group I due to partially remaining HA particles while most HA particle was removed. The group III and IV showed rough topography due to HA particles that was not grinded, and HA coated surface in group V showed very irregular surface with deep groove and prominence. In cross-sectional view, the group I showed uniform surface, and the group III, IV showed rough surface due to remaining HA particles but the thickness of HA coating was remarkably reduced. The group II has similar pattern in group I, and the group V showed about $40{\mu}m$ thickness although it was not constant. By analysis of surface component with EDX, the group II in which the grinding was effective showed a small quantity of calcium and phosphorous and the group III, IV, in which the grinding was incomplete showed calcium and phosphorus peak. In all experimental group, no other than titanium, aluminum, calcium, phosphorus was observed.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.134-134
• /
• 2009

ITZO 박막은 2개의 캐소드 (DC, RF)를 이용하여 마그네트론 2원 동시 방전법에 의해 고온에서 안정한 polyimide 기판위에 상온에서 증착하고 $200^{\circ}C$에서 어닐링 하였다. XRD 측정 결과 어닐링 과정을 거친 막들은 Zn의 도입에 따란 결정성이 감소하다가 RF파워 280W에서 증착한 박막은 완전한 비정질 구조를 보였다. AFM 측정과 밴딩 테스트 결과, ITO 및 ITZO 박막들은 결정성이 감소할수록 매끄러운 표면과 낮은 저항 변화율을 보여주었다. 전기 비정항은 Zn 함량이 증가함에 따라 증가하였지만, 광학적 투과율은 $200^{\circ}C$ 어닐링 과정을 거친후의 막들에 있어서 증가됨을 보였다.

• Geotechnical Engineering
• /
• v.12 no.2
• /
• pp.107-114
• /
• 1996

A series of shear tests is performed to measure friction coefficients of the interface between different reinforcements and weathered granite soils. The reinforcements tested are smooth steel strip, Paraweb(friction tie) and geotextile with rough surface, while the weathered granite soils are composed of different, grain size distribution. Soils are compacted with the energy of 95% modified AASHTO and fully saturated before testing to simulate the worst site condition. Because of characteristics of the direct shear apparatus, shear strength is obtained in terms of drained condition. Test results show that the more fines the soils contain, the larger ratio of friction coefficient ($\mu=\frac{tan{\delta}}{tan{\Psi}}$) is obtained. Also the ratios are much higher for the Friction tie and the geotextile compared to the smooth steel strip. Those suggest that even weathered granite soils with 36% fines are possible to use as backfill of reinforced earth structures for the two reinforcements when a drainage system is provided.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.4
• /
• pp.499-505
• /
• 2021

The purpose of this study is to investigate experimentally the physical/chemical properties of concrete surface according to types of formworks. Plywood formwork and coated plywood formwork were prepared. In addition, plywood formwork with sand paper was prepared to simulate deterioration of concrete or rough surface of concrete. Normal concrete was used in this study. The properties of concrete surface were investigated by visual inspection, scanning electron microscopy and energy-dispersive X-ray spectroscopy techniques, elemental mapping, 2D and 3D surface profile measurement, and zeta potential measurement. Test results showed that concrete in a coated formwork had smooth surface and concrete in the formwork with sand paper had rough surface. It was observed that properties of concrete surface depended on types of formworks. Furthermore, differences in surface roughness were significantly higher than those in chemical compositions and zeta potential.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.146-147
• /
• 2003

산업계에서의 다양한 제품 개발로 인해 새로운 형상 측정기술이 요구된다. 칩패키지와 실리콘 웨이퍼로 대표되는 광산란 표면 특성을 가진 제품들의 형상 측정은 거친 표면을 가진 반면 수마이크로의 형상 측정 정밀도를 요구하기 때문에 기존의 측정법으로는 기대하는 성과를 이루지 못해왔다. 현재까지 기존의 정통적인 측정법을 통해 측정 시도되어 온 방법들은 다음과 같이 두 방법으로 요약된다. 첫째, Kwon과 Han등은 경면(specular surface)을 측정하던 정통적인 간섭계에 10.6$\mu$m파장의 $CO_2$레이저를 광원으로 사용함으로써 가시광선 영역에서의 광산란 표면을 적외부 영역에서 경면화 하여 측정하였다. (중략)

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.303.2-303.2
• /
• 2016

현재 플라즈마를 이용한 기술은 반도체, 태양광 발전, 디스플레이 등 산업의 전반적인 분야에서 특히 반도체 공정을 이용한 산업에서는 핵심적인 기술이다. 반도체 공정 중에서 박막 증착과 식각 분야에서 플라즈마를 사용한 기술은 매우 높은 가치를 지니고 있다. 중요한 플라즈마 연구로는 이론적 접근을 통한 플라즈마 소스 개발과, 기 개발된 플라즈마 소스를 적용하여 반도체 공정에 적용함으로써 최적의 조건을 찾아내며, 그에 대한 메커니즘을 연구하는 분야로 크게 분리할 수 있다. 따라서 이러한 플라즈마 기술이 발달함에 따라 nano-scale의 연구 또한 상당히 중요한 부분으로 자리 잡고 있다. 본 실험에서는 RF magnetron sputter를 사용하고 질소 유량을 0.5 sccm으로 고정하여 AlN 박막을 증착하였다. 이후 상압 플라즈마를 이용하여 식각을 진행하였다. AlN 박막 전체 표면에 대하여 3초 및 6초간 식각을 진행하였다. 이후 Nano-Indenter를 사용하여 $100{\sim}7000{\mu}N$까지 힘을 증가시키며 측정하였다. 3초간 식각을 진행한 시료의 경우 압입 깊이 대비 Hardness 그래프에서 약 40 ~ 100 nm 까지 약 2.5 GPa 정도의 차이가 발생하였고 6초간 식각을 진행한 시료의 경우 압입 깊이 대비 Hardness의 그래프에서 약 40 ~ 130 nm 까지 약 1 GPa 정도의 차이가 발생함을 확인하였다. 이후 WET-SPM 장비를 사용하여 AFM 모드를 이용하여 박막 표면이 거칠기를 확인하였다. 플라즈마 식각공정을 거치지 않은 시료의 경우 박막의 거칠기는 7.77 nm로 측정되었고 3초간 플라즈마 식각공정을 거친 시료의 경우 6.53 nm, 6초간 플라즈마 식각공정을 거친 시료의 경우 8.45 nm로 나타남을 확인할 수 있었다. 이와 같은 결과들로부터 플라즈마 식각공정은 박막의 표면에도 영향을 미치지만 박막 내부 일정 부분까지 영향을 받는 것을 확인하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.10
• /
• pp.2180-2186
• /
• 2002

In a micro-scale contact, capillary force and van der Waals interaction significantly influence the contact between asperities of rough surfaces. Little is, however, known about the variation of these surface forces as a function of chemical property of the surface (wet angle), relative humidity and deformation of asperities in the real area of contact. A better understanding of these surface forces is of great necessity in order to find a solution for reducing friction and adhesion of micro surfaces. The objective of this study is to investigate the surface forces in micro-scale rough surface contact. We proposed an effective method to analyze capillary and van der Waals forces in micro-scale contact. In this method, Winkler spring model was employed to analyze the contact of rough surfaces that were obtained from atomic force microscopy (AFM) height images. Self-mated contact of DLC(diamond like carbon) coatings was analyzed, as an example, by the proposed model. It was shown that the capillary force was significantly influenced by relative humidity and wet angle of the DLC surface. The deformation of asperities to a critical magnitude by external loading led to a considerable increase of both capillary and van der Waals forces.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.10
• /
• pp.53-60
• /
• 2001

Surface roughness plays a significant role in friction, wear, and lubrication in machine components. Most engineering surfaces have the nongaussian height distribution. So, in this study, contact simulations are conducted for not only gaussian surfaces but also nongaussian surfaces. Nongaussian rough surface considering the kurtosis is generated numerically And the effects of kurtosis on real contact area fraction, average gap, and mean asperity contact pressure are studied. It will be shown that the real contact area fraction and the mean asperity contact pressure are sensitive to the characteristics of surface geometry according to kurtosis.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.18 no.1
• /
• pp.38-44
• /
• 2008

Contiuous c-oriented zeolite MFI films $(<35{\mu}m)$ were prepared by hydrothermal secondary growth of silicalite-1 seed crystal in the surface of alumina porous substrate and silicon substrate. The supported films were characterized with scanning electron microscopy and X-ray diffraction. Effect of substrate surface roughness were investigated and a mechanism for c-oriented film formation and characteristic dom-like defects formation which is observed after seeding growth was discussed. The roughness of substrate plays an important role.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.04a
• /
• pp.229-232
• /
• 2007

하이브리드 로켓의 연소율을 높이기 위해 유동 특성을 바꾸면서 실험을 수행하였고 연소된 연료 내부 표면이 고르지 못한 것을 볼 수 있었다. 그 원인을 밝히기 위해 연료 표면을 관찰하고 유동가시화 실험을 한 결과 거친 연료 표면의 원인이 검댕 때문이고 이것은 국부적인 산화제 부족현상 때문에 발생하게 되었다는 것을 알 수 있었다. 또 연소 시 연료 전체에 발생하는 검댕의 특성은 이 현상이 하이브리드 로켓만의 독특한 특징인 분출효과 때문이라고 예측할 수 있게 해주었다.