• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.2
• /
• pp.74-81
• /
• 2017

In this study, the combined-type diffuser developed by the Authors, in a previous study, was applied to a residential space. The performance of a ventilation and thermal environment, created by the use of a combined-type diffuser was compared to the pan-type diffuser widely used in apartment houses. In cooling conditions, because of the relatively high air flow rate of ceiling cassette-type air conditioners, the characteristics of airflow distribution in a room were governed by the air conditioner's airflow. In heating conditions, because of the low air flow rate of the diffuser, the characteristics of airflow distribution were governed by the buoyancy effect created by cold external walls and a hot floor. In terms of the Air Diffusion Performance Index (ADPI), which is a thermal environmental index, the result of a combined-type diffuser was greater than a pan-type diffuser in both of cooling and heating conditions. Consequently, the combined-type diffuser showed equal or superior ventilation and thermal environment performance compared to a pan-type diffuser.

• Journal of the Society of Disaster Information
• /
• v.13 no.4
• /
• pp.519-528
• /
• 2017

Even in South Korea, disaster victims are suffering from various disasters such as floods, earthquakes, landslides, fires, and most of them have evacuated to temporary housing facilities for disaster victims. However, there are few plans for the placement and performance of indoor temporary housing facilities provided to secure private space in temporary housing facilities for disaster victims. In order to improve the living environment in the temporary housing facility of the victim, we constructed a module of minimum temporary accommodation area per person of 3.3 square meters, designated by the MPSS, and are proceeding with the module arrangement plan, Presented the evaluation direction of the form, material and performance of the indoor temporary housing facility.

• Journal of the Korea Concrete Institute
• /
• v.17 no.4 s.88
• /
• pp.587-594
• /
• 2005

The purpose of seismic design is to ensure the serviceability of buildings against earthquake, which might be occurred during the service life of buildings, and to minimize the loss of life by preventing their failure under strong earthquake. The lack resistance of walls resulting from a tendency toward high-rise apartment buildings with shear walls and use of piloti would lead to a concentration of inelastic behaviors in their weak story. In this study, the seismic performance of reinforced concrete shear wall buildings haying piloti was analyzed by using the evaluation techniques which was proposed by FEMA 273 and ATC-40. The results from comparison with these two techniques are summarized as follows.; The results of elastic analysis method for seismic performance evaluation show that the effect of piloti and building height decrease performance index. In case of shear wall building, the state of insufficient shear stress governs their overall performance and it becomes evident in the case of the buildings with more than 25 stories. For the buildings of piloti, the change of mass, weak story, as well as insufficient shear stress, decrease the performance index rapidly compared with the performance index of the buildings without piloti. The results, obtained from the nonlinear static analysis using capacity spectrum method, indicate that the performance Point increases for the structure having Piloti and high story. Also, deformation limits of buildings satisfy the allowable criteria at the life safety level, but the immediate occupancy level is exceeded in buildings which have more than 25 stories.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.11B
• /
• pp.960-968
• /
• 2006

HMIPv6 improved the handover management of basic MIPv6 by introducing the new protocol agent MAP. In this new protocol, MAP instead of the Mobile Node intercepts all packets and redirects the packets to CoA of the Mobile Node. However, this process may degrade the network performance due to the centralization phenomenon of registration occurring in the hierarchical MAP structure. ffe propose two schemes to improve real time traffic performance. First proposal is a MAP selection mettled in which MAP is selected based on traffic characteristics. And we also propose differentiated traffic processing scheme with multi-level queues when Home Agent or Correspondent Nodes process Binding Update messages. Performances of the proposed scheme are analyzed. Analysis result shows that our model has good performance in the respect of location update cost and total cost of Mobile Nodes.

• Land and Housing Review
• /
• v.13 no.3
• /
• pp.93-106
• /
• 2022

Ventilation plays an important role in controlling indoor air quality. Due to the recent spread of infectious diseases such as COVID-19 and with people spending more time indoors, there's been increased attention on the importance of ventilation performance. In many countries, ventilation is regulated by airflow rates and the number of air changes per hour (ACH). However, airflow rates and ACH alone do not provide an accurate account of actual indoor pollutant removal and ventilation uniformity in a space. This study looked into the ventilation performance of an actual residential unit using several sampling points instead of basing it off of airflow and air change rates. Literature review was used to derive relevant influencing factors and the tracer gas dilution method was used for the field test. The study measured air velocity, age of air, and ventilation efficiency at several locations and compared them to the average value at the center of the test space to determine the differences in ventilation performance at the selected measurement points. The study showed that different sampling locations resulted in different ventilation values. Findings of this study will be used to develop an experimental procedure for evaluating indoor ventilation performance of actual residential spaces.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.3
• /
• pp.371-377
• /
• 2007

In this paper, acceleration threshold of perception for the horizontal vibration of tall buildings was estimated. Excessive vibration of tall buildings by wind can give displeasure, such as giddiness and visual insecurity. To provide comfortable environment to residents of tall buildings, acceleration needs to be limited. For tall buildings the first mode of vibration is dominant. To reproduce the first mode of vibration, experiments were performed by generating sine waves by a shaking table. A nitration house was made and forty persons were employed for experiments. The forty persons were organized into five experimental groups, each of which was composed of eight persons, and the threshold of perception for horizontal vibration was measured by increasing acceleration in the range of 0.2Hz through 1.2Hz of frequency, Performance curves were obtained by dividing the distribution of perception for horizontal vibration into the range of $0{\sim}20%,\;21{\sim}40%,\;41{\sim}60%,\;61{\sim}80%\;and\;81{\sim}100%$ and by fitting curves.

• Survey Research
• /
• v.11 no.2
• /
• pp.29-44
• /
• 2010

The aim of this study was to determine principal non-acoustical factors for noise annoyance in the vicinity of Kimpo Airport in Seoul, Korea. Noise annoyance was estimated using self-reported annoyance scale. We have conducted a social survey aiming to identify the main sound sources, evaluate the annoyance and analyse the main effects of noise on people. Acoustical and non-acoustical variables are expected to greatly affect annoyance responses. This study divided acoustical variables into aircraft, road traffic and neighboring noises, and non-acoustical variables into demographic, situational and attitudinal variables. The study performed multiple regression analysis to determine the influences each variable has on annoyance responses. Acoustical variables affect noise annoyance to aircraft and neighboring noise except road traffic noise. For road traffic and neighboring noise annoyance was affected by non-acoustical variable, insulation by housing type. For aircraft noise, main noise source of this area, annoyance was affected by acoustical variable and some non-acoustical variables, mainly exposure time.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.1
• /
• pp.13-22
• /
• 2015

In this study, a new RCSF (Reinforced Concrete Steel Frame) external connection method is proposed for seismic strengthening of medium-and low-rise reinforced concrete buildings. The RCSF method, proposed in this study, is capable of carrying out the seismic retrofitting construction while residents can live inside structures. The method is one of the strength design approach by retrofit which can easily increase the ultimate lateral load capacity of concrete buildings controlled by shear. The pseudo-dynamic test, designed using a existing school building in Korea, was carried out in order to verify the seismic strengthening effects of the proposed method in terms of the maximum load carrying capacity and ductility. Test results revealed that the proposed RCSF strengthening method installed in RC frame enhanced conspicuously the strength and displacement capacities, and the method can resist markedly under the large scaled earthquake intensity level.

• Land and Housing Review
• /
• v.5 no.4
• /
• pp.305-314
• /
• 2014

The technology-intensive unit modular method of factory production method is attracting attention by the limit of the labor-intensive and field centered wet construction method. In recent years, the unit modular method has been applied to the construction of schoolhouse and BOQ(bachelor offices' quarters), dormitories, etc. But the modular method still is not used in housing construction by the lack of verification of resident performance and construction cost. Therefore, this study analyzed the economics of modular house to vitalize the constructed residential building by modular method and to develop the modular method. According to the study results, the construction cost of the modular house was analysed more about 6.2% expensive than that of the existing housing. However, if the construction duration of modular house is shortened or the productivity of modular house is increased, the construction cost of modular house will be similar to the that of the existing house.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.4
• /
• pp.62-69
• /
• 2010

In this study, the serviceability performance of Waffle Shaped(WAS) and Double-Tee(DT) precast concrete slabs were evaluated and compared based on the vertical acceleration magnitude induced by walking and heel drop loads. Tests were conducted for practical building structures of which floor systems used WAS and DT slabs. Natural frequencies of the slabs were similar to those obtained by using analytical models. The measured acceleration level was evaluated by vertical floor acceleration criteria presented by ISO-2631, AIJ(1991, Japan) and a previous study regarding floor vibration limit. Test results showed that both WAS and DT slabs satisfied all the criteria and Peak acceleration level of WA slabs was lower than that of DT slabs.