• Proceedings of the KAIS Fall Conference
• /
• 2011.05b
• /
• pp.537-539
• /
• 2011

최근의 차량 연비는 엔진, 파워트레인 등 차량의 구성품들을 성능 개선하여 많이 향상 되었으나 연비 측정은 현재도 주어진 모드(LA-4, FTP-75 등)에서 컴퓨터 모의시험 및 다이나모에서 수행한다. 본 논문에서는 차량에 미리 장착된 지리정보데이터와 현재 주행하면서 수신되는 GPS 데이터를 이용하여 약 213Km 영동고속도로를 주행하면서 실제 도로의 연비 향상 방안을 도출한다. 지리정보데이터와 주행하면서 수신한 GPS 데이터 중에서 거리와 고도 데이터를 추출하여 각 구간의 경사도, 주행저항을 계산, 연비향상 알고리즘에 따른 속도 프로파일을 영동고속도로 전 구간에 대해서 완성하고 이 속도 프로파일로 컴퓨터를 이용한 AVL사의 CRUISE 프로그램으로 모의 주행하여 연비를 산출하고 연비 향상 방안을 제안한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.12B
• /
• pp.1703-1711
• /
• 2001

광시스템에서 발생할 수 있는 비선형 현상 중 하나인 유도 브릴루앙 산란은 낮은 입력 파워 레벨에서도 발생할 수 있기 때문에 광전송 시스템에 큰 영향을 주는 현상이다. 그러므로 고출력의 신호를 광섬유에 입사시켜 광전송 시스템의 전송 거리를 길게 하기 위해서는 광섬유에서 발생하는 유도 브릴루앙 산란에 대한 고려가 필요하다. 특히 현재 광통신에 사용되고 있는 파장 분할 다중방식(WDM) 광전송 시스템에서는 채널 간격이 좁으므로 유도 브릴루앙 산란의 영향을 고려해야만 한다. 브릴루앙 이득 스펙트럼은 브릴루앙 주파수 천이, 부릴루앙 선폭과 이득계수에 대한 정보뿐만 아니라 브릴루앙 임계값에 대한 정보를 포함한다. 이러한 유도 브릴루앙 산란 신호를 1550nm 파장대에서 실험적으로 확인하였으며 실험으로 관측한 SBS 신호를 이론적으로 계산된 값과 비교하였다. 실험으로 구한 신호 주파수는 10.8825GHz로서 이론상의 값 10.9GHz와 일치하였으며 브릴루앙 이득 스펙트럼을 측정한 결과 1.5436 $\times$ $10^{-ll}$m/w의 브릴루앙 이득 계수 $g_{0}$을 얻었다.다.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.458-460
• /
• 2007

RBF 네트워크의 중간층은 클러스터링 하는 층으로 주어진 자료 집합을 유사한 클러스터들로 분류하는 것이다. 여기서 유사하다는 것은 입력 데이터들에 대한 특징 벡터 공간사이에서 한 클러스터내의 벡터들 간에 거리를 측정하여 정해진 반경 내에 존재하면 같은 클러스터로 분류하고 정해진 반경 내에 존재하지 않으면 다른 클러스터로 분류한다. 그러나 정해진 반경 내에서 클러스터링 하는 것은 잘못된 클러스터를 선택하는 단점을 가지게 된다. 그러므로 중간층을 결정하는 것은 RBF 네트워크의 전반적인 효율성에 큰 영향을 준다. 따라서 본 논문에서는 효율적으로 중간층을 결정하기 위한 방법으로 퍼지 C-Means 클러스터링 알고리즘을 이용하고자 하였다. 그리하여 본 논문에서는 고장 전류의 특성을 해석하여 그 원인을 판단, 분류하기 위하여 전력계통의 고장 기록 장치로부터 얻어지는 선로의 전류 데이터를 FCM을 이용 분류하여 다양한 고장 모드를 판별할 수 있었다.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.5
• /
• pp.282-293
• /
• 2005

Sonoelastography is an ultrasound-based technique that visualizes the elastic properties of soft tissues by measuring the tissue motion generated by an externally applied vibration. In this paper. the characteristics of wave generation in soft tissues due to an acoustic vibrator are studied. The effects of modal patterns on the detectability of lesions such as tumors in senoelastography are also investigated These are accomplished by analyzing the vibration patterns calculated using theoretical equations and finite element methods in halt space, infinite plate. and finite-sized tissue. A finite-width source generates shear waves with large amplitude Propagating in specific directions. and the generation characteristics depend both on the width and frequency of the vibrator. as well as the distance from it. It is shown in a finite-sized tissue that the lesion detection in displacement images is quit dependent on the modal patterns inside tissue. In contrast it Is also found that the lesion detectability in strain images is less dependent on the modal Patterns and is much better than that in displacement images.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.12
• /
• pp.1155-1164
• /
• 2011

In this paper, we proposed the transmit beam measurement method of active phased array antenna, which is installed in Korea's first developed naval medium range radar, using near-field measurement facility. The pulse-mode high power characteristics of active phased array antenna's trasmit-beam make it difficult to measure with general near-field measurement facilities where low power continuous RF signals are used. Thus, in this paper, the measurement method of active phased array antenna's transmit beam in conjunction with the near-field measurement facility, which is suitable for the high-power transmit beam measurement, and PNA-X network analyzer(Agilent Technologies), which can support pulse-mode measurement, was proposed and measured by near-field measurement techniques. And the EIRP(Effective Isotropic Radiated Power), the transmit characteristic of active phased array antenna, was measured by the near field measurement techniques and compared to numerical estimation which was nearly equal with small difference of 0.1 dB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.10
• /
• pp.1017-1024
• /
• 2002

In this paper, we present the analysis of radio wave propagation characteristics in curved tunnels. Tunnel propagation models are performed in two cases which are using ray-tracing method for straight tunnels and geometrical optics extension to the standard hybrid waveguide model for curved ones. By regression analysis for measured power based on distance between the transmitter and the received antenna in tunnels that have 3.5 m $\times$ 6 m cross section and limited wall depth path loss are 0.19 dB/m for straight section and 0.68 dB/m for curved ones. By comparing model analysis with measurement in tunnels, it has been shown that the simulated results of tunnel propagation models are similar to the measured values.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.3
• /
• pp.50-57
• /
• 2007

Spray characteristics of an injector in a small liquid rocket engine (LRE) is characterized by Particle Image Velocimetry (PIV) and Dual-mode Phase Doppler Anemometry (DPDA). Instantaneous plane images captured by PIV are examined for the qualitative prediction of spray breakup with the setup of evaluation technique for effect of spray angles on injector performance. DPDA is also applied in order to quantify the average velocity, turbulent intensity, SMD, and number density of spray droplets along the spray stream distance leading to precise observation of spray atomization behavior. An objective of the study is the derivation of design parameters of new injectors and the establishment of performance criteria through the clear understanding of spray characteristics.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.3
• /
• pp.211-219
• /
• 2001

This paper describes a read-only CMOS transponder IC for RFID applications. A full-wave rectifier implemented using NMOS transistors supplies the transponder with a dc supply voltage using the magnetic field generated from a reader. A 64-bit ROM has been designed for a data memory. Front-end impedance modulation and Manchester coding are used for transmitting the data from the transponder memory to the reader. A new damping circuit which has almost constant damping rate under the variations of the distance between the transponder and the reader has been employed for impedance modulation. The designed circuit has been fabricated using a 0.65${\mu}{\textrm}{m}$2-poly, 2-metal CMOS process. Die area is 0.9mm$\times$0.4mm. Measurement results show that it has a constant damping rate of around 20~25% and a data transmission rate of 3.9kbps at a 125KHz RF carrier. The power required for reading operation is about 100㎼. The measured reading distance is around 7cm.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.8
• /
• pp.1254-1260
• /
• 2009

CDMA tele-Controller system is designed with a low power consumption 8 bit microcontroller, ATmega 2560. ATmega 2560 microcontroller consists of 4 UART (Universal asynchronous receiver/transmitter) ports, 4 kbytes EEPROM, 256 kbytes flash memory, 4 kbytes SRAM. 4 URAT is used for CDMA modem, communication for GPS module, EEPROM is used for saving a configuration for program running, a flash memory of 256 kbytes is used for storing a F/W(Firm Ware), and SRAM is used for stack, storing memory of global variables while program running. We have tested the communication distance between the coast station and sea by the fabricated control board using 800 MHz CDMA modem and GPS module, which is building for the navigational aid management system by remote control. As a results, the receiving signal strength is above -80 dBm, and then the characteristics of the control board implemented more than 10 km in the distance of the communication.

• Journal of Space Technology and Applications
• /
• v.4 no.2
• /
• pp.169-183
• /
• 2024

Korea Astronomy and Space Science Institute (KASI) developed the Geochang satellite laser ranging (SLR) system for the scientific research on the space geodesy as well as for the national space missions including precise orbit determination and space surveillance. The operation system was developed based on the server-client communication structure, which controls the SLR subsystems, provides manual and automatic observation modes based on the observation algorithm, generates the range data between satellites and SLR stations, and carry out the post-processing to remove noises. In this study, we analyzed the requirements of operation system, and presented the development environments, the software structure and the observation algorithm, for the server-client communications. We also obtained laser ranging data for the ground target and the space geodetic satellite, and then analyzed the ranging precision between the Geochang SLR station and the International Laser Ranging Service (ILRS) network stations, in order to verify the operation system.