• The Journal of the Acoustical Society of Korea
• /
• v.13 no.6
• /
• pp.75-82
• /
• 1994

The ray paths and travel times of sound wave in the ocean depend on the physical properties of the propagating media. Ocean Acoustic Tomography(OAT), which is inversely estimate the travel time variations between fixed sources and receivers the physical properties of the corresponding media can he understood. To apply ocean survey technology by using the OAT, the tomographic procedure requires forward problem that variation of the travel times be identified with the variability of the medium. Also, received signals must be satisfied the necessary conditions of ray path stability, identification and resolution in order for OAT to work. The canonical ocean has been determined based on the historical data and its travel time and ray path are used as reference values. The sound speed of canonical ocean in the East Sea is about 1523 m/s at the surface and 1458 m/s at the sound channel axis(400m). Sound speeds in the East Sea are perturbed by warm eddy whose horizontal extension is more than 100 km with deeper than 200 m in depth scale. In this study, an acoustic source and receiver are placed at the depth above the sound channel axis, 350 m, and are separated by 200 km range. Ray paths are identified by the ray theory methed in a range dependent medium whose sound speeds are functions of a range and depth. The eigenray information obtained from interpolation between the rays bracketing the receiver are used to simulate the received signal by convolution of source signal with the eigenray informations. The source signal is taken as a 400 Hz rectangular pulse signal, bandwidth is 16 Hz and pulse length is 64 ms. According to the analysis of the received signal and identified ray path by using numerical model of underwater sound propagation, simulated signals satisfy the necessary conditions of OAT, applied in the East Sea.

• Journal of Korean Society of Transportation
• /
• v.34 no.5
• /
• pp.437-448
• /
• 2016

Some previous researches suggested a transit trip destination inference method by constructing trip chains with incomplete(missing destination) smart card dataset obtained on the entry fare control systems. To explore the feasibility of the transit trip destination inference method, the transit trip chains are constructed from the pre-paid smart card tagging data collected in Busan on October 2014 weekdays by tracing the card IDs, tagging times(boarding, alighting, transfer), and the trip linking distances between two consecutive transit trips in a daily sequences. Assuming that most trips in the transit trip chains are linked successively, the individual transit trip destination zones are inferred as the consecutive linking trip's origin zones. Applying the model to the complete trips with observed OD reveals that about 82% of the inferred trip destinations are the same as those of the observed trip destinations and the inference error defined as the difference in distance between the inferred and observed alighting stops is minimized when the trip linking distance is less than or equal to 0.5km. When applying the model to the incomplete trips with missing destinations, the overall destination missing rate decreases from 71.40% to 21.74% and approximately 77% of the destination missing trips are the single transit trips for which the destinations can not be inferable. In addition, the model remarkably reduces the destination missing rate of the multiple incomplete transit trips from 69.56% to 6.27%. Spearman's rank correlation and Chi-squared goodness-of-fit tests showed that the ranks for transit trips of each zone are not significantly affected by the inferred trips, but the transit trip distributions only using small complete trips are significantly different from those using complete and inferred trips. Therefore, it is concluded that the model should be applicable to derive a realistic transit trip patterns in cities with the incomplete smart card data.

• Archives of design research
• /
• v.18 no.2 s.60
• /
• pp.37-46
• /
• 2005

Today's advertisement is dominated by visual images, which deliver messages in the most efficient and engaging way. Vivid and live images, through multimedia, attract the viewer to consume the products being advertised. In this course, the effect of 'Verfremdung' or alienation is often detected. This terminology was at first used in a epic play of Bertolt Brecht to signify a specific effect to block the empathy of the audience by reminding them of their position as the audience separate from the play. 'Verfremdung' helps them to have a sense of objectivity and critical attitude toward the performance. Multimedia commercials nowadays exhibit such a quality together with 'viewer participation:' criticism on reality: and 'speed.' In an advertisement for Shinsegi Communications' mobile system titled <017-I-Touch series, the hand transformed into a web>, the copy, 'my blood type is 'i', ' is accompanied by six unrelated fictitious scenes in which the same ocean appears as a common denominator. Because there is no connection between the scenes, free imagination of the viewer has to be involved and thus plays a significant role in making them into a context. This fact dearly exhibit some characteristics of post- modern advertisement. Momentary 'Gap' and 'Difference' between scenes contribute to 'Verfremdung' or alienation' that makes it hard for the consumers to comprehend the content on the spot. Such an uneasy situation, however, keeps the viewers thinking about the advertisement itself. While repeatedly exposed to the alienated images, the viewers come to get involved in the advertisement, trying to make the fragmented images into a coherent context. In addition, the leaps between the scenes produce a sense of 'speed' in a context, which adds more impact to the way of delivering messages using multimedia. With the help of multimedia, 'Verfremdung: which was originally intended to bring about objective and critical altitude of the audience in a play, plays a crucial role in attracting the viewer's attention and conveying a specific message in a moment in contemporary advertisement.

• The Journal of Art Theory & Practice
• /
• no.2
• /
• pp.75-120
• /
• 2004

Studies on western art in Korea has been caught in a dilemma that they could deal with only those things which had been arranged according to their 'historical generalization' in their contexts because of the bounds of time and space. It is not trivial that such conditions affect art studies in Korea. Access to the original texts and to their contexts of production is so restricted that the studies on them are prone to he superficial. And it is not independent on the politics of Korean art scene. Such factors are on the background of Korean art's excessive 'assimilation or accordance' with western art. The domestic studies on western art history and art theory have failed to notice the differences in context and Korean art has simply mediated or reproduced the restricted information by those studies. Also the studies on western art in Korea have been made use of as a justifying method of one's own academic domains. In such situations we should lead the studies on western art history and western art theory to a more reflective direction and confirm that the studies should not have any privileges of the realities. And we should try to reform a scholarship which participates in our life and existence. The field of domestic studies on western art history and western art theory should free itself from the invention of objectivity or the neutrality of mechanical reading and turn its eyes to the realities of life where events happens. Constantly suggesting which way Korean art and world art should go has to be the field's new coordinates.

• Cartoon and Animation Studies
• /
• s.50
• /
• pp.327-347
• /
• 2018

From the end of the 18th century to the end of the 19th century, the late 19th century was a genre of a new art that was in contrast to the distribution between social class and low class, and it was also a popular culture that attempted to transform the late Joseon Dynasty's social class. It is no exaggeration to say that it is the origin of the Korean folk art, started as popular art concepts, use colorful techniques and decorations which doesn't yield to ordinary iconography. But, because of the attempt of this technique was used by lower class, the meaning of the idea was lowered from iconography to secular picture. Ethics character picture, passed on to the present from going through the upheaval cultural time, was started from secular picture and transformed into hyukpil time illustration, and it represented popular arts until now. This thesis aims to reflect the meaning, various visual expressions and the lifestyle of Ethics Character Picture of filial piety and brotherly love, which is a unique genre of popular arts. Also, propose to suggest about the kinetic typography using video media, and how the traditional ethics character picture, which are combined with video technology, effects to the advertisements. These kind of attempts will show the world about the korea's traditional contents, and through the various media information it can be recreated as national symbolic key words. Furthermore, its meaningful to pass down the noble and cultural Ethics Character Picture of filial piety and brotherly love to younger generations. And by realigning to modern expression, it is predicted that it will be significantly meaningful to pass down and make the younger generations to understand to spirit of the ancestors. This will allow various attempts to reconstruct various items of contents from Korea's traditional contents to new media content that merged with video media.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.63-68
• /
• 2018

The establishment of Ground Control Points (GCPs) in UAV-Photogrammetry is a working process that requires the most time and expenditure. Recently, the rapid developments of navigation sensors and communication technologies have enabled Unmanned Aerial Vehicles (UAVs) to conduct photogrammetric mapping without using GCP because of the availability of new methods such as RTK (Real Time Kinematic) and PPK (Post Processed Kinematic) technology. In this study, an experiment was conducted to evaluate the potential of RTK-UAV mapping with no GCPs compared to that of non RTK-UAV mapping. The positioning accuracy results produced by images obtained simultaneously from the two different types of UAVs were compared and analyzed. One was a RTK-UAV without GCPs and the other was a non RTK-UAV with different numbers of GCPs. The images were taken with a Canon IXUS 127 camera (focal length 4.3mm, pixel size $1.3{\mu}m$) at a flying height of approximately 160m, corresponding to a nominal GSD of approximately 4.7cm. As a result, the RMSE (planimetric/vertical) of positional accuracy according to the number of GCPs by the non-RTK method was 4.8cm/8.2cm with 5 GCPs, 5.4cm/10.3cm with 4 GCPs, and 6.2cm/12.0cm with 3 GCPs. In the case of non RTK-UAV photogrammetry with no GCP, the positioning accuracy was decreased greatly to approximately 112.9 cm and 204.6 cm in the horizontal and vertical coordinates, respectively. On the other hand, in the case of the RTK method with no ground control point, the errors in the planimetric and vertical position coordinates were reduced remarkably to 13.1cm and 15.7cm, respectively, compared to the non-RTK method. Overall, UAV photogrammetry supported by RTK-GPS technology, enabling precise positioning without a control point, is expected to be useful in the field of spatial information in the future.

• Journal of the Korean Geographical Society
• /
• v.42 no.4
• /
• pp.469-487
• /
• 2007

Grain-Size Trend Analysis is the methodology to identify net sediment transport pathways, based on the assumption that the movement of sediment from the source to deposit leaves the identifiable spatial pattern of mean, sorting, and skewness of grain size. It can easily be implemented with low cost, so it has great potentials to contribute to geomorphological research, whereas it can also be used inadequately without recognition of its limitations. This research aims to compare three established methods of grain-size trend analysis to search for the adequate way of application, and also suggest the research tasks needed in improving this methodology 1D pathway method can corporate the field experience into analyzing the pathway, provide the useful information of depositional environments through X-distribution, and identify the long-term trend effectively. However, it has disadvantage of the dependence on subjective interpretation, and a relatively coarse temporal scale. Gao-Collins's 2D transport vector method has the objective procedure, has the capability to visualize the transport pattern in 2D format, and to identify the pattern at a finer temporal scale, whereas characteristic distance and semiquantitative filtering are controversial. Le Roux's alternative 2D transport vector method has two improvement of Gao-Collins's in that it expands the empirical rules, considers the gradient of each parameters as well as the order, and has the ability to identify the pattern at a finer temporal scale, while the basic concepts are arbitrary and complicated. The application of grain sire trend analysis requires the selection of adequate method and the design of proper sampling scheme, based on the field knowledge of researcher, the temporal scale of sediment transport pattern targeted, and information needed. Besides, the relationship between the depth of sample and representative temporal scale should be systematically investigated in improving this methodology.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9B
• /
• pp.610-618
• /
• 2005

As developed Internet and Computer Capability, Many Users take the many information through the network. So requirement of User that use to network was rapidly increased and become various. But it spend much time to accept user requirement on current network, so studied such as Active network for solved it. This Active node on Active network have the capability that stored and processed execution code aside from capability of forwarding packet on current network. So required execution code for executed packet arrived in active node, if execution code should not be in active node, have to take by request previous Action node and Code Server to it. But if this execution code take from previous active node and Code Server, bring to time delay by transport execution code and increased traffic of network and execution time. So, As used execution code stored in cache on active node, it need to increase execution time and decreased number of request. So, our paper suggest ANC caching technique that able to decrease number of execution code request and time of execution code by efficiently store execution code to active node. ANC caching technique may decrease the network traffic and execution time of code, to decrease request of execution code from previous active node.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.20 no.3
• /
• pp.141-150
• /
• 2015

Dinoflagellates are ubiquitous and important primary producers in the oceans. They have diverse trophic modes, i.e., phototrophic, heterotrophic, and mixotrophic modes and thereby, play important ecological role in marine microbial food-web. While many studies have been focused on planktonic dinoflagellates in pelagic ecosystems, benthic, sand-dwelling dinoflagellates that inhabit in intertidal zone have been very poorly documented worldwide. We investigated biodiversity, occurrence, and molecular phylogeny of benthic, sand-dwelling dinoflagellates from the intertidal flat of Dongho, west coast of Korea during low-tide, monthly from November 2012 to February 2014. About 27 species of 13 genera in orders Gonyaulacales, Gymnodiniales, Peridiniales, Prorocentrales have been identified, of which members in the genus Amphidinium constituted a major part of the sand-dwelling dinoflagellates in this area. A total of 34 isolates from 16 species of the sand-dwelling dinoflagellates were isolated from Dongho, Mohang, Gamami, and Songho in the west coast and Hyupjae in Jeju of Korea, their 28S rDNA sequences were successfully amplified, and applied for molecular phylogenetic analyses. In the 28S rDNA phylogeny, Amphidinium species diverged across three major clusters within the order Gymnodiniales and formed polyphyletic group. Based on the unambiguously aligned partial 28S rDNA sequences including variable D2 region, the genotypes of Amphidinium mootonorum Korean strains greatly differed from that of Canadian strain with 19.2% of pairwise nucleotide difference, suggesting that further ultrastructural studies may provide additional characters to clearly separate these genotypes. Two potential toxic species, Amphidinium carterae and A. operculatum appeared occasionally during this study. Quantitative assessment and toxicity of those species should be addressed in the future.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.5
• /
• pp.312-321
• /
• 2003

In this paper, we implement robot which are ability to recognize obstacles and moving automatically to destination. we present two results in this paper; hardware implementation of image processing board and software implementation of visual feedback algorithm for a self-controlled robot. In the first part, the mobile robot depends on commands from a control board which is doing image processing part. We have studied the self controlled mobile robot system equipped with a CCD camera for a long time. This robot system consists of a image processing board implemented with DSPs, a stepping motor, a CCD camera. We will propose an algorithm in which commands are delivered for the robot to move in the planned path. The distance that the robot is supposed to move is calculated on the basis of the absolute coordinate and the coordinate of the target spot. And the image signal acquired by the CCD camera mounted on the robot is captured at every sampling time in order for the robot to automatically avoid the obstacle and finally to reach the destination. The image processing board consists of DSP (TMS320VC33), ADV611, SAA7111, ADV7l76A, CPLD(EPM7256ATC144), and SRAM memories. In the second part, the visual feedback control has two types of vision algorithms: obstacle avoidance and path planning. The first algorithm is cell, part of the image divided by blob analysis. We will do image preprocessing to improve the input image. This image preprocessing consists of filtering, edge detection, NOR converting, and threshold-ing. This major image processing includes labeling, segmentation, and pixel density calculation. In the second algorithm, after an image frame went through preprocessing (edge detection, converting, thresholding), the histogram is measured vertically (the y-axis direction). Then, the binary histogram of the image shows waveforms with only black and white variations. Here we use the fact that since obstacles appear as sectional diagrams as if they were walls, there is no variation in the histogram. The intensities of the line histogram are measured as vertically at intervals of 20 pixels. So, we can find uniform and nonuniform regions of the waveforms and define the period of uniform waveforms as an obstacle region. We can see that the algorithm is very useful for the robot to move avoiding obstacles.