• Title/Summary/Keyword: 거대 유동

Search Result 30, Processing Time 0.025 seconds

PIV Measurement of Bulk Flow in a Stirring Mixer (교반혼합기 내의 거대유동에 대한 PIV측정)

  • Kim, Sang-Ki;Kim, Kyung-Chun
    • Proceedings of the KSME Conference
    • /
    • 2000.04b
    • /
    • pp.680-685
    • /
    • 2000
  • Liquid flow in a stirring mixer driven by a six-blade turbine has been investigated experimentally. The flows were quantified by measurements of velocity characteristics. obtained by a Particle Image Velocimetry(PIV). for a blade rotational speed of 100r.p.m. and for two blade clearances from the bottom of the tank. The instantaneous flow fields show that the bulk flow consists of small scale vortices very complicately. However, the mean flow results show that the formation of ring vortices above and below the blade. which depend on the clearance.

  • PDF

Large Scale Bursting Event in a Channel Flow (난류 채널유동에서 생성된 거대 파열 현상에 관해서)

  • Na, Yang
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.25 no.8
    • /
    • pp.1060-1067
    • /
    • 2001
  • A large-scale bursting event has been analyzed in a turbulent channel flow using a data obtained from a direct numerical simulation (DNS). Large-scale, plume-like structures have been frequently observed in many experimental results, but the origin of those structures is far from being fully understood. It is believed that those large scale events occur occasionally but contribute significantly to the generation of Reynolds shear stress in the outer layer. This paper attempts to give detailed examples of those large-scale motions observed in a turbulent channel flow at relatively low Reynolds number.

Three-Dimensional Numerical Simulation of Mold-Filing and Void Formation During Vacuum-Assisted Resin Transfer Molding (VARTM 공정에서의 금형 충전 및 기공 형성에 관한 3차원 수치해석)

  • 강문구;배준호;이우일
    • Composites Research
    • /
    • v.17 no.3
    • /
    • pp.1-7
    • /
    • 2004
  • In the vacuum assisted RTM (VARTM) process that has become the center of attention for manufacturing massive composite structures, a good evacuation of air in the fiber preform is recognized as the prime factor. The microvoids, or the dry spots, are formed as a result of improper gate/vent locations and the mold geometry. The non-uniform resin velocity at the flow front leads to the formation of microvoids in the fibers, whereas the air in the microvoids can migrate along with the resin flow during mold filling. The residual air in the internal voids of a composite structure may cause a degradation of the mechanical properties as well as the structural failure. In this study, a unified macro- and micro analysis methods were developed to investigate the formation and transport of air in resin during VARTM process. A numerical simulation program was developed to analyze the three-dimensional flow pattern as well as the macro- and microscopic distribution of air in a composite part fabricated by VARTM process.

플라잉디스크의 단면 형상에 따른 공력 특성 연구

  • Kim, Tae-Uk;Park, Da-Un
    • Proceeding of EDISON Challenge
    • /
    • 2016.03a
    • /
    • pp.628-631
    • /
    • 2016
  • 본 연구에서는 플라잉디스크의 윗면 곡률과 끝단두께에 따른 공력특성의 변화 및 유동 흐름을 EDISON_CFD를 통해 해석하고자 한다. 플라잉디스크는 받음각이 증가할수록 윗면 표면에서는 박리 거품이 발생하게 되고 아랫면에서 윗면으로 올라 갈려는 유동의 흐름이 발생하게 되어 뒷전과 후류에서 거대한 박리 거품이 발생하게 되어 공력특성 및 유동흐름에 큰 변화를 주게 된다. 총 5가지의 형상에 대해서 받음각을 $0^{\circ}{\sim}25^{\circ}$까지 마하수 0.0588, 해석모델은 KFLOW에서 k-w SST를 레이놀즈수 $3.78{\times}10^5$을 조건으로 각 형상의 공력특성과 유동의 흐름의 비교를 분석하였다. 그 결과 윗면의 곡률이 증가 할수록 앞전박리가 활발해지고, 끝단두께가 두꺼워 질수록 뒷전박리가 활발해진다. 이로 인해 곡률은 완만할수록 두께는 얇을수록 양력계수와 실속각을 증가 시킬 수 있다.

  • PDF

Bedform Morphology of the Continental Shelf Sandy Sediments Around the Korean Peninsula (한반도(韓半島) 주위(周圍) 대륙붕(大陸棚) 사질(砂質) 퇴적물(堆積物)의 표면유동구조(表面流動構造))

  • SUK, BONG-CHOOL;KAGAMI, HIDEO;TAIRA, ASAHIKO
    • 한국해양학회지
    • /
    • v.29 no.3
    • /
    • pp.239-247
    • /
    • 1994
  • Bedform morphology of the giant ripples have been studied on the continental shelf of the Yellow Sea, East China sea and Korea-Tsushima Strait on the basis of side-scan sonar image, sub-bottom profile, sedimentary facies, geomorphology evidence and hydrology. There are well developed giant ripples ranging from 100 to 500 m in wavelengths and from 2 to 10 m in wave height at nine sites in the study area, which are covered by medium to fine sand. Most of them have been formed under the present hydrologic regime where the tidal currents and local currents or turbulence flows are superimposed. In the study area, giant ripples are produced on two different environments. One is at the geomorphic narrow zone such as the Korea Strait where currents are accelerated by the topographic effects, while the other is the sandy flat plain where tidal currents and local currents are harmonized.

  • PDF

An Integrated Numerical Analysis Framework for Engineering Education in e-Science Environment (e-사이언스 환경에서 공학 교육을 위한 통합 수치 해석 프레임워크)

  • Park, Sook-Young;Kang, Hye-Jeong;Kim, Yoon-Hee
    • The Journal of Korean Association of Computer Education
    • /
    • v.15 no.2
    • /
    • pp.67-73
    • /
    • 2012
  • The analytical experiments for fluid dynamics lead a sequence of complex scientific computations composing of numerical equations and require enormous computing resources with appropriate management tools. Currently most studies on e-Science environment for numerical studies focus on solving specific problems to drag out the best performance of matters and have less interest in providing a common framework to apply for diverse numerical domains in engineering education, especially for fluid dynamics. This paper presents an integrated e-Science experiment tool which could be easily applicable to solve various numerical analyses in fluid dynamics. As a proof-of-concept, an integrated e-Science framework with three numerical analyses has been designed and implemented over UNICORE that runs over grid computing environment.

  • PDF

Flow Control of Smart UAV Airfoil Using Synthetic Jet Part 1 : Flow control in Hovering Mode Using Synthetic Jet (Synthetic jet을 이용한 스마트 무인기(SUAV) 유동제어 Part 1 : 정지 비행 모드에서 synthetic jet을 이용한 유동제어)

  • Kim, Min-Hee;Kim, Sang-Hoon;Kim, Woo-Re;Kim, Chong-Am;Kim, Yu-Shin
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.37 no.12
    • /
    • pp.1173-1183
    • /
    • 2009
  • In order to reduce the download around the Smart UAV(SUAV) at hovering, flow control using synthetic jet has been performed. Many of the complex tilt rotor flow features are captured including the leading and trailing edge separation, and the large region of separated flow beneath the wing. In order to control the leading edge and trailing edge separation, synthetic jet is located at 0.01c, $0.3c_{flap}$, $0.95c_{flap}$. As non-dimensional frequency, the flow pattern is altered and the rate of drag reduction is changed. The results show that synthetic jets shorten the vortex period and decrease the vortex size by changing local flow structure. By using leading edge jet and trailing edge jet, download is efficiently reduced compared to no control case at hovering mode.

A Study on Mass Fractions of Individual Particles by SEM/EDX in Seoul Subway Stations (SEM/EDX를 이용한 서울시 지하철 역사 내 개별입자의 질량분율에 관한 연구)

  • 한근혁;김동술
    • Proceedings of the Korea Air Pollution Research Association Conference
    • /
    • 2002.04a
    • /
    • pp.249-250
    • /
    • 2002
  • 입자상 물질은 호흡에 의해 폐 깊숙이 침착되어 인체에 피해를 줄 수 있다 같은 질량의 거대 및 미세 입자가 있을 경우, 입자의 크기가 작아짐에 따라 비표면적이 급속히 커지기 때문에 입자가 유해 중금속 성분을 함유하고 있을 경우 그 중금속의 농축 정도가 크다. 지하철 역사는 사람들이 가장 많이 생활하는 지하 공간중의 하나이며, 유동인구가 많아 입자상 물질의 발생이 심한 지역으로 외기에 비해 희석, 화산 공간이 크지 않기 때문에 역사 내 유해 환경 오염 물질의 영향과 관리 대책에 대한 연구가 진행되고 있다. (중략)

  • PDF

Flow Analysis of Multi-stage Rocket using Heterogeneous Resources based on Grid Environment (그리드 환경에서 분산된 자원을 이용한 다단 로켓의 유동해석)

  • Ko Soon-Heum;Jung Myungwoo;Kim Chongam;Rho Oh-Hyun;Lee Sangsan
    • 한국전산유체공학회:학술대회논문집
    • /
    • 2002.10a
    • /
    • pp.78-93
    • /
    • 2002
  • 통신 기술의 비약적 발전에 힘입어 기존의 Parallel Computing만으로는 해석할 수 없었던 거대 규모의 문제를 원격지에 있는 고성능의 자원간 연동을 통해 해석하고자 하는 연구가 활발히 진행중이며, 이와 같은 개념을 Grid Computing이라 한다. 본 연구에서는 Grid 환경을 이용한 CFD 해석 방안에 초점을 맞추고 있으며, 이를 위하여 분산된 컴퓨팅 자원을 다양하게 조합하여 Grid 환경에서의 Load Balancing을 위한 병렬 효율에 대한 연구를 수행하였다. 그리고, 다양한 성능 테스트의 결과를 기반으로 Grid 환경에서 두 개의 보조 부스터를 가지는 병렬형 다단 로켓에 대한 유동 해석을 수행하였다.

  • PDF