• Journal of the Korean Institute of Landscape Architecture
• /
• v.39 no.4
• /
• pp.98-106
• /
• 2011

Establishing conservation programs to protect and maintain populations of endangered species are not only a global trend, but also a pursuit endorsed by the Korean Environmental Conservation Act. This study evaluates the feasibility of alternative habitat patches for the endangered butterfly Parnassius bremeri. A portion of habitat of P. bremeri is expected to be fragmented and damaged due to the scheduled construction of the Sangju-Yongduk Highway. A trans fer of the habitat patches of P. bremeri is also scheduled. In order to select an alternative habitat patch, the Mark-Release-Recapture (MRR) method was used to simulate a patch transfer model. The connectedness between habitat are as and the survival of local populations were evaluated for each candidate habitat. It was found that metapopulations with patch distances of <250m showed a 50% connectedness and survival rate in local populations. P. bremeri were expected to migrate at an average distance of 300m. In addition, P. bremeri formed a metapopulation that exhibited intimate patch dynamics that promoted persistence among these patches. Possible candidate habitats including those recommended by local governing bodies were evaluated along with habitats that may counter problems arising from the damage done to the original habitat and habitats that may have a compensatory value equal to that of the original habitat. Based on these criteria, Ansa-myeon township office was selected due to its high scores. This scoring was based on a consideration of a wide range of variables that mark a successful transfer of habitat. These include the amount of funding available, the governing bodies of the possible alternative habitat, and the Expected collaborative effort of local citizens. This decision was collaborated on by incorporating the expertise of various fields of study including biology, ecology, biogeography, ecological engineering, landscape architecture, and social sciences. Therefore, it is suggested that in order to evaluate an alternative habitat for organisms, many social issues as well as ecological issues must be considered.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.2
• /
• pp.114-123
• /
• 2009

To investigate the possible use of plants for landscaping in reclaimed soil, a planting pilot system experiment was performed over the course of four years in reclaimed dredging area with four species: Alnus firma, Alnus hirsuta, Pinus thunbergii, and Pyrachantha angustifolia for 4 years. The physicochemical characteristics of the tested soil showed that it was sandy through coming from a reclaimed dredging area. The average pH of the tested soil was 7.16(slight alkali), and electric conductivity(EC) was relatively low, $294{\mu}S/cm$, even though it came from a saltwater area. To test the effect of planting density vs. phytomass by plant specie from a planting basin, the experiment was designed using four plant species with high and low planting densities over 4 years. The planting conditions of the growth of landscape tree species exhibited growth height as follows: A. hirsuta, A. firma, P. thunbergii, and P. angustifolia, whill the DBH followed the order of A. hirsuta, A. firma, and P. thunbergii. The total phytomass of each plant was higher at low density planting areas than high density planting area in terms of total phytomass production and growth distribution in the reclaimed dredging area. Total phytomass per unit area increased as follows: A. hirsuta, A. firma, P. thunbergii, and P. angustifolia. The total phytomass per each tested plant was 2 times higher in low density planting areas than high density planting areas. Total phytomass per unit area, however, was similar or slighty higher in high density planting areas compared to low density areas. Among the tested plants, A. hirsuta showed the highest phytomass, implying that A. hirsuta adapted very well to the reclaimed area and has the capability of a fast growth, nitrogen fixation tree, and utilizing insoluble nutrients through inoculated root nodule bacteria. The yield of phytomass per individual in low density Alnus species was greater than that of the high density. However, those per unit areas had no difference in the density-dependent planting. The ratio of belowground to aboveground was $0.21{\sim}0.26$. Thus, it could be concluded that the Alnus species are potential candidates for ornamental tree species in reclaimed dredging areas. This study offers baseline data for the use of ornamental tree species in reclaimed dredging areas. Additional research is required for different ornamental species in order to increase phytomass of a planting conditions based on reclaimed dredging areas.

• Journal of Environmental Impact Assessment
• /
• v.26 no.1
• /
• pp.27-43
• /
• 2017

The objectives of the study were to evaluate fish compositions, endangered species, community structure, physical habitat, and general water quality for a preliminary environmental impact assessment of Jeokbyeok River on the road construction between two regions. Total number of species and total number of individuals, based on CPUE, were 23 and 1186, respectively. The endangered species (I, II) as the legal protection species were Pseudopungtungia nigra (79 samples) Gobiobotia brevibarba) (5) Gobiobotia macrocephala (2), indicating a requiring of endangered species conservation. In the meantime, exotic species and ecological disturbing species such as Micropterus salmoides and Lepomis macrochirus, were not present, indicating a well conserved area. According to fish community analysis, values of species diversity index were high (range: 0.788 - 1.030), and the dominance index were low (range: 0.097 - 0.183), indicating that the fish community in this area was maintained well without high dominacne by specific species. Also, fish analysis on tolerance guilds and trophic guilds showed that the proportions of sensitive species were largely exceeded the proportions of the tolerant species, while the proportions of insectivore species were largely exceeded the proportions of the omnivore species. This outcome suggests that the ecosystem was well maintained in terms of tolerance and trophic compositions (food chain). Ecological health, based on the multi-metric fish model of Fish Assessment Integrity (FAI), reflected those fish conditions. In other words, values of FAI model averaged 82.4, which means a "good condition" in the criteria of ecological health by the Minstry of Environment, Korea. In addition, general water quality and physical habitat analyses showed that the system was in good condition. Under these conditions, if the road constructions between the two regions happen in the future, inorganic suspended solids may increase in the waterbody, and this may result in indirect or direct influences on the physical habitats and food chain as well as fish compositions, so the ecological protections and prevention strategy from the soil erosion are required in the system.

• Korean Journal of Environment and Ecology
• /
• v.29 no.5
• /
• pp.703-709
• /
• 2015

A breeding pair of the Black-faced Spoonbill Platalea minor was firstly recorded on Chilsando Islands, Younggwang, Jeollanamdo Province in 1991. Since the mid 2000s, breeding population on the breeding sites has gradually increased. This study was conducted to identify breeding status and nest site characteristics of the species from May to August, 2013 on Chilsando Islands. We recorded number of nests, length and width of the nest base, slope around the nests, nest materials, distances from the nearest nest, presence of nest cover and nesting area. In 2013 breeding season, 25 of 49 nests produced at least one successful fledging. A total of 55 youngs were successfully fledged and number of fledging per nest was 2.20 individuals. Nesting area was $77.8m^2$ and $93.4m^2$ for Sansando and Yuksando Islet, respectively. Soil and soil mixed with tree root were preferred for substrate of nest base over rock and Brassica napus was dominantly selected as nest materials by Black-faced Spoonbills. Nest characteristics of 22 nests in Sasando and Yuksando Islet varied $49.59{\pm}6.53cm$(mean${\pm}$SD) for length of nest base, $41.00{\pm}5.82cm$ for width of nest base, $20.85{\pm}9.96^{\circ}$ for slope above the nest, $34.09{\pm}17.75^{\circ}$ for slope below the nest and $130.82{\pm}84.17cm$ for distances from the nearest nest. Fifteen pairs (68.2%) occupied where nest cover existed. Nest cover were located in front of the nest for 5 pairs, back of the nest for 9 pairs and both front and back of the nest for 1 pair.

• The KIPS Transactions:PartA
• /
• v.16A no.6
• /
• pp.427-436
• /
• 2009

Digital virtual manufacturing is a technology that aims for the rapid development of products and the verification of production-process in ways that are more efficient by integrating digital models within the entire manufacturing process. These digital models utilize various information technologies, such as 3D CAD and simulations. Mixed reality, which represents graphical objects for only needed parts against real scene, can bring a more enriched sense of reality to an existing virtual manufacturing system that is in a pure virtual environment, and it can reduce the time and money needed for modeling the environment. This paper suggests a method for planning virtual factory layouts based on mixed reality using legacy datathat are already constructed in the real field. To do this, we developed the method to acquire simulation data from legacy data and process this acquired data for visualization based on mixed reality. And then we construct display system based on mixed reality, which can simulate virtual factory layout with processed data. Developed system can reduce errors related with factory layout by verifying the location and application of equipments in advance before arrangement of real ones at the practical job site.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.1
• /
• pp.1-10
• /
• 2012

Mobility and quality of service (QoS) are becoming the more important issues in wireless communications. The traditional Internet service is expanding into new access media and applications. Since wireless communication services are accompanied by frequent handovers at remote sites, scalable and fast handover has become a prerequisite for ubiquitous communication. In this paper, the differentiated service (Diffserv) model is deployed in heterogeneous proxy mobile IPv6 (PMIPv6) networks to satisfy the QoS guaranteed service and fast handover requirements. The operational procedures for QoS guaranteed global roaming are presented. In addition, QoS management and handover cost evaluation schemes based on a mobile host's movement scope are proposed. This paper analyzes the reduction in handover delay in a network-based localized mobility management framework. We propose and analyze a PMIPv6 optimized with a global mobile access gateway (G-MAG), which is a network-based entity, to further improve the handover performance in terms of handover delay while maintaining minimal signaling overhead in the air interface among converged heterogeneous wireless networks. The handover signaling procedures with host-based MIPv6 are compared with network-based proxy MIPv6 (PMIPv6) and fast PMIPv6 assisted by G-MAG to show how much handover delay reduction can be achieved. Analytical results show that the handover delay is significantly reduced.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.859-864
• /
• 2006

Mean shift 는 데이터의 특징을 잘 살려내는 None-parametric 방법으로, 특히 영상처리분야에서 많은 각광을 받아왔다. 하지만 좋은 결과를 보장하는 뛰어난 성능에도 불구하고, 높은 메모리소요와 긴 처리시간에 기인하여, 비디오처리 등의 분야에 적용하기엔 현실적인 제약점이 있다. 상기한 제약점을 극복하기 위해, 본 시스템은 비디오를 분석하여 전경과 후경으로 나눈다. 본 논문은 전경으로 분류된 부분에 대해 각 분리된 개체를구분하고, 좌표변환(coordinate shift)을 실행하여 연산을 할 비디오의 연산의 규모를 줄이는 방법론을 제시한다. 이러한 처리로 매우 많은 처리시간이 단축됨을 실험을 통해 알 수 있었다. 다음으로, 나뉘어진 전경에 3D mean shift를 적용하여 생성된 결과물에 대하여 3D cluster data structure 를 생성하고, 이를 이동하여 인터랙티브 에디팅이 가능하도록 하였다. 후경으로 나뉜 데이터는 이미지 한 장으로 축약이 되며, 2D mean shift 기반의 interactive cartooning system 을 통하여 만화화가 된다. 본 논문은 만화 특유의 단순한 톤을 표현하기 위해, 세밀한 분할이 필요한 부분과 그렇지 않은 부분을 따로 구분하여 처리하는 레이어처리방법을 제안한다. 위의 과정을 여러 실사이미지에 적용, 실험해본 결과 기존의 연구결과에 비해 매우 짧은 시간 내에 대상의 특징이 잘 나타낸 양질의 결과물이 생성되었다. 이러한 결과물은 출판, 영상편집분야 등 여러 분야에서 요긴하고 간편하게 사용될 수 있을 것으로 생각된다.

• Review of KIISC
• /
• v.24 no.5
• /
• pp.75-81
• /
• 2014

현재 우리나라는 2013년 제주 스마트그리드 실증단지사업을 완료한 이후, 현재 AMI 및 ESS 보급사업을 진행 중이고 더불어 주요 7~8개 도시에 대한 스마트그리드 시티 사업도 준비 중에 있다. 스마트그리드 인프라의 본격적인 확산과 더불어 가장 우려되는 사안 중의 하나가 사이버 보안 이슈이며, 이는 기존의 주요 전력망 보안정책이 폐쇄망 운영을 골자로 하고 있다는 점에서 볼 때 상충되는 측면이 있다. 스마트그리드의 중심이 기존의 대형 전력망 중심에서 스마트 홈 기반 중심으로 옮겨가면서, 전력망은 외부 네트워크와의 연결성이 강화되고 있으며 통신 분야에서 진행되어 오던 사물통신(Internet of Things: IoT) 개념과 결합하면서 그 개방성의 진행이 가속화되고 있다. 따라서 기존의 폐쇄망 정책만으로는 보안성을 확보하는데 명확한 한계가 존재하며 시대적 조류에도 부합하지 않기 때문에, 새로운 패러다임이 필요한 때라고 판단된다. 그 대안 중의 하나로 개방 네트워크로 인해 증가하는 연결성을 보안 위협의 루트가 아닌 보안성을 강화하기 위한 환경으로 활용하는 것이다. 촘촘히 연결된 네트워크를 통해 각 개체가 서로를 상호 모니터링 함으로써 전체 시스템이 오염되는 것을 막을 수 있다. IoT의 도입을 통해 기기 간에는 사회적 연결성이 강화될 것이며, 이러한 연결성과 그 안에 숨겨진 맥락을 통해 이상 여부를 사전에 감지해낼 수 있다. 본 논문에서는 그러한 사회적 관계성에 근거하여 AMI 네트워크에서의 이상 징후를 감지하기 위한 기본적 방법론을 제안하고자 한다.

• Journal of KIBIM
• /
• v.5 no.2
• /
• pp.46-54
• /
• 2015

Vision-based tracking has been proposed as a means to efficiently track a large number of construction resources operating in a congested site. In order to obtain 3D coordinates of an object, it is necessary to employ stereo-vision theories. Detecting and tracking of multiple objects require an entity matching process that finds corresponding pairs of detected entities across the two camera views. This paper proposes an efficient way of entity matching for tracking of construction workers. The proposed method basically uses epipolar geometry which represents the relationship between the two fixed cameras. Each pixel coordinate in a camera view is projected onto the other camera view as an epipolar line. The proposed method finds the matching pair of a worker entity by comparing the proximity of the all detected entities in the other view to the epipolar line. Experimental results demonstrate its suitability for automated entity matching for 3D vision-based tracking of construction workers.

• Journal of Energy Engineering
• /
• v.11 no.3
• /
• pp.194-202
• /
• 2002

In this paper, we simulate the power system transient stability of Kwang Yang steel works using object-oriented programming (OOP). OOP is a more flexible method than procedural programming. There are several advantages in dynamic system simulation using OOP, The maintenance and repair of program are easy because it is sufficient to modify necessary parts which correspond to the change of system without overall change of program. We have implemented a graphical man-machine interface (MMI) that can be used draw one-line system diagram and analyze power flow and dynamic stability. The implemented MMI also provide a graphical viewer that display dynamic stability analysis results by mouse event handling. The proposed method have been applied to Kwang Yang steel works network for on-line dynamic stability analysis. The dynamic behaviour of 17 synchronous generators and 25 synchronous motors has been studied in the Kwang Yang network.