• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.9
• /
• pp.3472-3480
• /
• 2010

The Clustering technology of Energy efficiency wireless sensor network gets the energy efficiency by reducing the number of communication between sensor nodes and sink node. In this paper, First analyzed on the clustering technique of the distributed clustering protocol routing scheme LEACH (Low Energy Adaptive Clustering Hierarchy) and HEED (Hybrid, Energy-Efficient Distributed Clustering Approach), and based on this, new energy-efficient clustering technique is proposed for the cause the maximum delay of dead nodes and to increase the lifetime of the network. In the proposed method, the cluster head is elect the optimal efficiency node based on the residual energy information of each member node and located information between sink node and cluster node, and elected a node in the cluster head since the data transfer process from the data been sent to the sink node to form a network by sending the energy consumption of individual nodes evenly to increase the network's entire life is the purpose of this study. To verify the performance of the proposed method through simulation and compared with existing clustering techniques. As a result, compared to the existing method of the network life cycle is approximately 5-10% improvement could be confirmed.

• The KIPS Transactions:PartC
• /
• v.17C no.3
• /
• pp.271-280
• /
• 2010

For the next generation mobile communication system, diverse wireless network techniques such as beyond 3G LTE, WiMAX/WiBro, and next generation WLAN etc. are proceeding to the form integrated into the All-IP core network. According to this development, Beyond 3G integrated into heterogeneous wireless access technologies must support the vertical handover and network to be used of several radio networks. However, unified management of each network is demanded since it is individually serviced. Therefore, in order to solve this problem this study is introducing the theory of Common Radio Resource Management (CRRM) based on Generic Link Layer (GLL). This study designs the structure and functions to support the vertical handover and propose the vertical handover algorithm of which policy-based and MCDM are composed between LTE and WLAN systems using GLL. Finally, simulation results are presented to show the improved performance over the data throughput, handover success rate, the system service cost and handover attempt number.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.5
• /
• pp.141-150
• /
• 2014

In recent years, because of the development of ubiquitous technology in healthcare research is actively progress. Especially, healthcare service area is change to home for the elderly or patients from hospital. The technology to identify residents in a home is crucial for smart home application services. However, existing researches for resident identification have several problems. In this case, residents are needed to attach of various sensors on their body. Also relating private life, it is difficult to apply to resident's environment. In this paper, we used constraint-free sensor and unconscious sensor to solve these problems and we limited using of sensor and indoor environment in the way of working economical price systems. The way of multi-resident identification using only these limited sensors, we selected elements of personal identifications and suggested the methods in giving the weight to apply these elements to systems. And we designed the SABA mechanism to tract their location and identify the residents. It mechanism can distinguish residents through the sensors located each space and can finally identify them by using the records of their behaviors occurred before. And we applied the mechanism designed for applications to approve this location tracking system. We verified to the location tracking system performance according to the scenario.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10c
• /
• pp.631-633
• /
• 2004

본 논문에서는 유비쿼터스 홈 네트워킹 환경에서 사용자의 위치 이동을 실시간 추적하고 가정 내 주거 활동의 편의를 제공하는 정보가전기기들을 제어할 수 있는 능동형 홈 서비스 시스템을 제안한다. 본 시스템은 다계층의 분산시스템 환경으로 구성된다. 즉, 물리 센서와 정보가전기기 등이 존재하는 물리층과 유/무선 지원 인터넷/인트라넷 통신 플랫폼을 포함하는 시스템층, 그리고 물리적 장치들로부터 시스템층을 통해 들어오는 정보를 처리하는 응용층으로 구성되며 실 생활 공간 및 시간을 응용 시뮬레이션 환경으로 반영시킨다. 능동형 홈 서비스 시스템의 개발 목적은 실버아파트에서 독거노인의 위치기반 건강관리 정보 서비스 및 아파트 내 정보가전기기들의 맞춤형 제어를 제공하기 위함이다. 이와 같은 시스템을 구축하기 위해서는 홈 네트워크 내에서 사용자의 이동 위치를 파악하는 실시간 위치추적 기술과 정보가전기기들의 동작을 실시간 제어하기 위한 기술이 요구된다. 제안한 시스템에서는 UC at Irine의 DREAM Lab.에서 개발한 TMO(Time-triggered Message -triggered Objecl) 스킴을 적용하여 각 물리 센서와 정보가전기기들을 응용의 구성요소로 개발했다. 이를 통해 가정 내에 이동하는 TMO로 매핑된 이동객체를 추적하고 또한 홍 네트워크로 연결된 정보가전기기들을 정보가전 TMO 동작객체로 매핑하여 이들 사이의 능동적인 상호동작을 통해 맞춤형 서비스 및 실시간 제어가 가능하도록 했다. 마지막으로, 실시간 위치추적 및 정보가전제어 응용 시뮬레이션을 통해 능동형 홈 서비스 시스템을 구성하는 개별 동작객체들의 기능성과 수행성을 검증했다.황에 대하여 소개한다.이스는 실험정보가 저장된 데이터베이스, 분석결과가 저장된 데이터베이스, 그리고 유전자 정보 탐색을 위한 데이터베이스로 분류해 데이터를 효율적으로 관리할 수 있게 하였다. 본 시스템은 LiNUX를 운영체계로 하고 데이터베이스는 MYSQL로 하여 JSP, Perl. 통계처리 언어인 R로 구현되었다.프트웨어를 사용하지 않고도 국내의 순수 솔루션인 리눅스 기반의 LonWare 3.0 다중 바인딩 기능을 통해 저 비용으로 홈 네트워크 구성 관리 서버 시스템 개발에 대한 비용을 줄일 수 있다. 기대된다.e 함량이 대체로 높게 나타났다. 점미가 수가용성분에서 goucose대비 용출함량이 고르게 나타나는 경향을 보였고 흑미는 알칼리가용분에서 glucose가 상당량(0.68%) 포함되고 있음을 보여주었고 arabinose(0.68%), xylose(0.05%)도 다른 종류에 비해서 다량 함유한 것으로 나타났다. 흑미는 총식이섬유 함량이 높고 pectic substances, hemicellulose, uronic acid 함량이 높아서 콜레스테롤 저하 등의 효과가 기대되며 고섬유식품으로서 조리 특성 연구가 필요한 것으로 사료된다.리하였다. 얻어진 소견(所見)은 다음과 같았다. 1. 모년령(母年齡), 임신회수(姙娠回數), 임신기간(姙娠其間), 출산시체중등(出産時體重等)의 제요인(諸要因)은 주산기사망(周産基死亡)에 대(對)하여 통계적(統計的)으로 유의(有意)한 영향을 미치고 있어 $25{\sim}29$세(歲)의 연령군에서, 2번째 임신과 2번째의 출산에서 그리고 만삭의 임신 기간에, 출산시체중(出産時體重) $3.50{\

• Journal of Technology Innovation
• /
• v.23 no.3
• /
• pp.169-199
• /
• 2015

Information and communication technologies (ICT) have been combined with products from other industries to provide new functionality, as recently shown in the cases of Internet of Things (IoT). Modularity assumes a crucial role in such technological convergence, and has impacts on the relationship between organizations as well as competition within an industry. Interface standards, which ensure the connectivity between modules, serve as a critical factor in the process by which modularity affects organization systems and industry structure. To understand the aforementioned phenomenon, we studied modularity and interface standards with a focus on the interaction between technology and organization systems and subsequent changes in industrial dynamics. This paper examines previous literature on modularity and interface standards in the aspects of product architecture, organization systems, and institutional factors. With this analytical framework, we conducted a comparative analysis of electronic and automotive industries to derive implications for standardization policy. This research has shown the significance of external open interface standards in shaping an industrial landscape where a variety of module producers horizontally compete. It also advises that policymakers take into account product characteristics, engagement of leading firms in an industry, and institutional factors such as WTO law in the design of standardization policy.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.2
• /
• pp.627-633
• /
• 2020

Assembly process data can be gathered in real time in a manufacturing execution system (MES) server using proximity sensors, barcodes, RFID, ZigBee, Bluetooth, wireless sensor networks, etc. Although this is suitable for identifying process flow and checking production progress, it is difficult to trace the location of individual workers in real time for missing work or trajectories within the work area. To overcome this, the location and trajectory of the working tool can be analyzed in real time through a position tracking system of an operator's working tool. It can instruct the operator to perform a consistent working process. Productivity and quality improvement can be achieved by an alarming or blocking operator with possible assembly defects during the assembly process in real time. To this end, we developed a real-time tool position-tracking sensor system based on Ultra Wide Band (UWB) trilateration using a Kalman filter to eliminate mechanical vibration and radio communication noise.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.35-44
• /
• 2018

The purpose of this study was to derive the factors that affect the development cost and the priority/weight of effectiveness in the pre-development stage of a service robot to estimate the development cost. In particular, the functions of service robots vary according to the field of application, and their prices are not only different but most of them are small-scale production; hence, a cost estimation is necessary. In this research, the factors affecting the service robot development cost in the process of service robot development and adding functions are classified as a functional factor while the factors that affect the entire development cost due to environmental causes, in which the service robot is operated or in the development process, are classified as an adjustment factor. The FGI was conducted to derive the factors and a Delphi survey was conducted among 84 domestic experts to determine the weights of the factors. As a result of the analysis, six functional factors (41 detailed criteria) and five adjustment factors (17 criteria) were derived, the cost weight and rank of the factors were suggested. This study suggests that the development cost of the service robot can be used as a decision-making strategy to select the operation functions in the development process, and can be utilized as an essential tool for the service robot development.

• Journal of KIISE:Information Networking
• /
• v.35 no.2
• /
• pp.130-138
• /
• 2008

The scheme for recognizing the channel availability is one of the most important research issues in cognitive radio systems utilizing unused frequency bands. In this paper, we propose a novel scheme of selecting sensing channel in order to improve the sensing ability of frequency status in cognitive radio ad hoc networks. To fully exploit the sensing ability of each cognitive radio user, we adopt a master for a cluster which is made of several cognitive radio users. By gathering and analyzing the sensing information from cognitive radio users in the cluster, the cooperative sensing is realized. Since the transmission range of a licensed user is limited, it is possible that a master determines different sensing channels to each cognitive radio users based on their location. By making cognitive radio users sense different channels, the proposed scheme can recognize the state of wireless spectrum fast and precisely. Using the simulation, we compare the performance of the proposed scheme with those of two different compared schemes that one makes cognitive radio users recognize the frequency status based on their own sensing results and the other shares frequency status information but does not utilize the location information of licensed user. Simulation results show that the proposed scheme provides available channels as many as possible while detecting the activation of licensed user immediately.

• Journal of the Korean association of regional geographers
• /
• v.20 no.4
• /
• pp.357-378
• /
• 2014

The concern on new regional geography in Korea has emerged in the 1990s under the influence of paradigm shift of Western geography, that is, the withering of positivist geography and the introduction of grand social theories into geography. New regional geography in Korea also seems to have developed in the rapidly changing process of glocalization of capitalism which has accompanied with the transformation toward post-Fordism with high-tech innovation, development of transportation and communication technology with time-space compression, and increasing social and cultural mobility with change of identity. But it can be pointed out that discussion on methodology for regional geography in Korea has been shrunken since the mid 2000s, and there has been relatively little empirical research with synthetic approach to region. But more concern on methodology in terms of place, territory, network, scale, etc. rather than the concept of region itself has increased, and empirical researches on regions in specific fields of human geography have been promoted. It is argued that the traditional distinction between synthetic and analytic approaches seems no longer significant. But geographers need to extend the concept of region in relation to other diverse spatial concepts, and to purse simultaneously structural analysis on glocalization process and practical strategies responding positively to the process.

• Spatial Information Research
• /
• v.21 no.2
• /
• pp.23-33
• /
• 2013

W ith the recent advancement of IoT (Internet of Things) technology, there has been much interest in the spatial query processing which energy-efficiently acquires sensor readings from sensor nodes inside specified geographical area of interests. Therefore, various kinds of spatial query processing algorithms and distributed spatial indexing methods have been proposed. They can minimize energy consumption of sensor nodes by reducing wireless communication among them using in-network spatial filtering technology. However, they cannot optimize multiple spatial queries which w ill be w idely used in IoT, because most of them have focused on a single spatial query optimization. Therefore, we propose a new multiple spatial query optimization algorithm which can energy-efficiently process multiple spatial queries in a sensor network. The algorithm uses a concept of 'query merging' that performs the merged set after merging multiple spatial queries located at adjacent area. Here, our algorithm makes a decision on which is better between the merged and the separate execution of queries. For such the decision making, we additionally propose the cost estimation method on the spatial query execution. Finally, we analyze and clarify our algorithm's distinguished features using the spatial indexing methods of GR-tree, SPIX, CPS.