• Journal of Korean Association for Spatial Structures
• /
• v.4 no.3 s.13
• /
• pp.57-63
• /
• 2004

Many researches have been conducted to describe the structural behaviour of reinforced concrete beams with openings, and were generally concentrated on the shear behaviours. The objective of this paper is to study the shear and bending capacities of RC beams with openning. In experimental study, a total of seven RC beam with circular opennings under monotonic loading conditions were investigated. The parameters used in this study include the openning size and the existence of re-bar.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.11a
• /
• pp.378.1-378
• /
• 2002

DVD, HD(High Density)-DVD등의 고밀도 광 디스크의 광 기록재생장치는 고 개구율(Numerical Aperature)의 대물렌즈로 집광 빔의 크기를 소형화하여 기록용량을 증대시키고 있다. 이 경우 광축과 광 디스크의 기록면에 대한 경사는 광학적인 수차가 발생되어 신호 레벨의 저하나 기록시의 피트(pit) 형성의 오류, Crosstalk등의 문제가 발생한다. 이를 극복하기 위해 직접 디스크의 경사에 따라 제어할 수 있는 픽업 구동기가 제안되어 왔지만 주로 Half Height(12.7mm)에 사용되는 틸트 구동기였으며 Slim(6.3mm)형 틸트 구동기는 제안되지 못하였다. (중략)

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.11a
• /
• pp.369-372
• /
• 2011

본 연구에서는 철도차량의 실물화재에 대한 열방출율을 축소모형으로 예측하기 위해 실험적인 조건들을 연구하였다. 축소모형의 크기는 지하철 전동차의 1/10 스케일을 적용하여 길이 1.89m, 너비 0.295m, 높이 0.235m 이며 15mm의 석고보드를 사용하였다. 축소모형의 실험적 조건으로는 한쪽 면만 개방한 4개의 개구부 환기조건과 3mm, 6mm의 종이내장재를 이용하여 열방출율을 예측하여 보았다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10b
• /
• pp.891-896
• /
• 2000

It is necessary to drill new opening in an existing R.C beam either for service ducts and pipes or the determination of in place concrete strength. Therefore, to simulate in this study, 18-R.C beams were fabricated with circular openings. The major parameters considered are the sizes, location of opening and cut-off stirrup. These beams are tested shear failure and capacity under a point loading. The sizes of opening are changed 0.11, 0.2, 0.3 times of beam-depth and the locations of opening are divided into $X_1$ zone, $X_2$ zone, $X_3$zone. Loads are applied up to failure to observe the cracking initiation and propagation, initial diagonal cracking, midspan deflection. As a result, the sizes of opening with 0.11D and 0.2D in R.C beams without cutoff stirrup are profitable in $X_1$ and $X_3$zone. R.C beams with 0.3D and cutoff stirrup are advantageous in $X_3$zone.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.2
• /
• pp.59-67
• /
• 2009

본고를 통해 초고주파 이론과 공학 분야는 물론 물리학, 재료공학의 기초 학문 분야에서도 지대한 관심을 모으고 있는 Metamaterial(MTM) 구조에 대해 조명하고자 한다. 먼저 MTM의 핵심이라고 할 수 있는 Left-Handedness(LH) 왼손 전파 법칙과 LH 발생 재질인 Double Negative(DNG) 재질에서의 전파 특성을 상대 유전율과 상대 투자율 평면에서 확인하고, 일반 매질인 Double Positive(DPS)형인 오른손 전파 법칙 Right-Handedness(=RH) 매질과의 결합(Composite Right-and Left-Hnaded=CRLH)에서 얻어지는 특징들을 살펴본다. 특히 DPS와 DNC의 결합에서 얻을 수 있는 음의 공진과 0차 공진(Zero-Order Resonance)을 언급하고 ZOR을 응용한 RF 부품의 소형화와 특성 개선사례를 소개한다. 또한, 안테나와 전자파 산란 특성에 MTM의 특수한 성질을 이용하여, 크기를 줄이거나 표면파를 억제하거나 혹은 방사 개구를 확대 또는 렌즈 특성을 얻어낸 사례도 언급된다 그리고 LH 특성은 아니지만 MTM 계열인 ENG(Epsilon Negative), MNG(Mu Negative), ENZ(Epsilon Near Zero)를 응용한 예들을 보이고, MTM 관점에서 FSS(Frequency Selective Surface )의 특성을 논의하고, 그간에 발표된 대표적 MTM 연구 결과에 대한 소개를 마치고자 한다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.3
• /
• pp.916-923
• /
• 1991

본 연구에서는 표면 균열이 있는 평판의 탄소성 피로하중 상태에서 성장하는 균열 형태의 변화와, 작용하는 응력의 크기에 따른 균열 개페구 특성의 변화를 연구하 였다.또, 유효 응력 확대계수 범위, .DELTA.K$_{eff}$와 J적분범위, .DELTA.J가 탄소성 응력 상태에서의 표면 피로균열 진전속도를 나타내는 역학양으로 사용되는데 따른 적합성등 을 검토하였다.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.324-329
• /
• 2004

In this study, an application of crack morphology variables in the Leak-Before-Break(LBB) evaluation for nuclear piping systems is investigated, including influences on the leakage crack size and crack instability loads. The crack surface roughness and the number of flow turns as a function of the crack opening displacement are applied to LBB evaluations for KSNP pressurizer surge line, for which fatigue and stress corrosion cracking are considered as failure mechanisms. As a result, there would be a significant impact on safety margins to acceptance criteria for the surge line if crack morphology variables are applied additionally to the current regulatory guide without re-analyses for justification of safety factors being applied on the leakage crack size and piping loads for evaluations.

• Computational Structural Engineering
• /
• v.7 no.4
• /
• pp.113-118
• /
• 1994

The purpose of this study is elastic plastic finite element analysis for standard fracture toughness specimens. The principles of elastic-plastic fracture mechanics are shortly summarized and the special requirements for computational tools are derived. Possibilities to model the crack tip singularities are mentioned. The relevant fracture parameters like J-Integral and COD and their correlation are evaluated from elastic plastic finite element calculations of standard fracture toughnes specimens. The size and form of the plastic zone are shown. The comparion between experiment and caculation is discussed as well as the application of the limit load analysis.

• Journal of the Korean Society of Safety
• /
• v.16 no.2
• /
• pp.7-12
• /
• 2001

The finite volume method was utilized for computation of convection heat transfer in a two-dimensional enclosure with an inflow opening and an outflow opening. The objective of this study is to investigate temperature distribution on ceiling for different locations and sizes of the outflow opening. The inflow opening was set to be H$_{i}$=0 and U=50. The results fur different sizes of the opening H$_{0}$=0.1, 0.2, 0.3, and 0.4 shooed similar flow patterns and temperature distribution. Location of the outflow opening, however, influenced significantly on the temperature distribution on the ceiling.ing.

• Journal of the Korean Society of Safety
• /
• v.18 no.3
• /
• pp.34-38
• /
• 2003

The large eddy simulation based Fire Dynamics Simulator was utilized to investigate the effects of the size of an opening on smoke removal performance for the three smoke control systems-ventilation purge, and extraction. Three different opening sizes, $r_A$=1, 2, and 3 were investigated while the flow rate remained 0.75 $m^3/s$ at the inlet or outlet depending on the systems. Increase of the opening size did not give a significant difference in the smoke removal rate for the three smoke control systems, though the increasing opening size slightly improved smoke removal. The extraction system was shown the best smoke control system, and the purge system yielded low performance compared to the other two systems for all the different opening sizes.