• Journal of the Korean Society of Marine Environment & Safety
• /
• v.22 no.6
• /
• pp.731-737
• /
• 2016

To understand the characteristics and strength of the cold water that has caused damage to marine-culturing farms around Guryongpo, in the southwestern part of Korea, surface and water column temperatures were collected from temperature loggers deployed at a sea squirt farm during August-November 2007 and from a Real-time Information System for Aquaculture environment operated by NIFS (National Institute of Fisheries Science) during July-August 2015 and 2016. During the study period, surface temperature at Guryongpo decreased sharply when south/southwestern winds prevailed (the 18-26th of August and 20-22nd of September 2007 and the 13-15th of July 2015) as a result of upwelling. However, the deep-water (20-30m) temperature increased during periods of strong north/northeasterly winds (the 5-7th and 16-18th of September 2007) as a result of downwelling. Among the cold water events that occurred at Guryongpo, the mass death of cultured fish followed strong cold water events (surface temperatures below $10^{\circ}C$) that were caused by more than two days of successive south/southeastern winds with maximum speeds higher than 5 m/s. A Cold Water Index (CWI) was defined and calculated using maximum wind speed and direction as measured daily at Pohang Meteorological Observatory. When the average CWI over two days ($CWI_{2d}$) was higher than 100, mass fish mortality occurred. The four-day average CWI ($CWI_{4d}$) showed a high negative correlation with surface temperature from July-August in the Guryongpo area ($R^2=0.5$), suggesting that CWI is a good index for predicting strong cold water events and massive mortality. In October 2007, the sea temperature at a depth of 30 m showed a high fluctuation that ranged from $7-23^{\circ}C$, with frequency and spectrum coinciding with tidal levels at Ulsan, affected by the North Korean Cold Current. If temperature variations at the depth of fish cages also regularly fluctuate within this range, damage may be caused to the Guryongpo fish industry. More studies are needed to focus on this phenomenon.

• The Korean Journal of Pesticide Science
• /
• v.13 no.1
• /
• pp.39-44
• /
• 2009

This study was conducted to evaluate the actual risk of fipronil on worker honey bees (Apis mellifera L.) through acute contact toxicity test, acute oral toxicity test, toxicity of residues on foliage test, and small scale field test. The $48h-LD_{50s}$ of fipronil SC on honeybee were $0.005{\mu}g$ a.i./bee in acute contact toxicity test and $0.004{\mu}g$ a.i./bee in acute oral toxicity test, respectively. In toxicity of residues on foliage test, fipronil showed over 90% of mortality during 28days after treatment at recommended application rate. The $DT_{50}$ of dislodgeable foliar residue was 9 days. Finally, In small scale field test, fipronil showed similar toxicity in the residues on foliage test. It was concluded that fipronil has very high acute toxicity and long residual toxicity to honeybee. Therefore, fipronil is highly toxic to bees exposed to direct treatment or residues on blooming crops or weeds. Do not apply this product or allow it to drift to blooming crops or weeds if bees are visiting the treatment area. To protect honeybee and wild pollinators from outdoor use of fipronil, ultimately it should need to limit for only indoor use to prevent pollinators from unintentionally exposure of fipronil.

• Journal of the Korean Wood Science and Technology
• /
• v.34 no.4
• /
• pp.37-45
• /
• 2006

Recently, wood-framed houses has been built in the Korea for pension. Wood is good material for human healthy, while the construction lumbers are treated with preservative such as CCA (chromated copper arsenate), which contain some toxic elements for human body. However, if the waste woody biomass treated with various heavy metals, which has been collected from house construction or demolition, was fired in the field, and incinerated or landfilled after mass collection, such components will result in the toxic air pollutants in the burning or land fills, and spreaded into other areas. So the careful selection of wood and chemicals are required in advance for house construction, in particular, for environment-friendly housings. Therefore, this study was carried out to determine the content of toxic heavy metals in woody materials such as domestic hinoki and imported hemlock treated with CCA for housing materials, and the post-treated wood components such as organic fertilizer, sludge, dry-distilled charcoal and carbonized charcoal, to be returned finally into soil. The results are as follows. 1) The chemical analysis of toxic trace elements in various solid biomass required accurate control and management of laboratory environment, and reagents and water used, because of the error of data due to various foreign substances added in various processing and transporting steps. So a systematic analyzers was necessary to monitor the toxic pollutants of construction materials. 2) In particular, the biomass treated with industrial biological or thermal conditions such as sludge or charcoals was not fully dissolvable after third addition of $HNO_3$ and HF. 3) The natural woody materials such as organic fertilizer, sludge. and charcoals without any treatment of preservatives or heavy metal components were nontoxic in landfill because of the standard of organic fertilizers, even after thermal or biological treatments. 4) The CC A-treated wood for making the construction wood durable should not be landfilled, because of its higher contents of toxic metals than the criterion of organic fertilizer for agriculture or of natural environment. So the demolished waste should be treated separately from municipal wastes.

• Journal of Aquaculture
• /
• v.5 no.1
• /
• pp.93-108
• /
• 1992

This study was conducted to understand the variation of suspended matters in coastal waters of Cheju Island. Water sampling was carried out at 22 stations along the coast of this island from March 1988 to November 1989. Analyzed and/or observed items were water temperature, salinity, total solids (TS), total dissolved solids (TDS), volatile suspended solids (VSS), and fixed suspended solids (FSS). Inter-relationships between wind velocity, precipitation and total suspended solids (TSS) were also investigated. More windy days prevail in winter season (December, January and February) in Cheju Island. Thirty-six points seven percent of total windy days of a year appeared in this season. The rate of windy days in spring was $27.3\%$ and those in summer and fall were $17.9{\%}$ each. From February to July, the heaviest precipitation was observed in the southeastern area and that from August to January was observed in the eastern part of this island. TS and TDS were firmly related with the fluctuation of salinity. Therefore, there were higher in spring and lower in summer. The highest TSS (7.73 $mg/{\ell}$) was observed in February and was the lowest (4.73 $mg/{\ell}$) in September. Annual mean value of TSS was 6.3$mg/{\ell}$. The highest VSS (2.03 $mg/{\ell}$) was observed in July and lowest (1.42 $mg/{\ell}$) in September. The percentage of VSS per 755 was $30.6{\%}$ in average that was not much higher level compared to the other polluted areas. This value became higher in summer (av. $34.17{\%}$) and lower in winter (av. $24.2{\%}$). Fluctuation of TSS was mainly related with the freshwate. discharge, tidal action, and re-suspension of bottom sediments by the wind waves. Therefore, TSS concentration was low in summer and hish in winter.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.3
• /
• pp.434-441
• /
• 2015

To develop dough methods for improving bread making properties of Korean wheat flour, straight dough methods (SDM) and dough and sponge methods (DSM) were applied. The bread making properties such as weight of bread, specific volume, baking loss, crumb color, and texture were analyzed. In comparison of flour properties between Korean wheat flour and imported wheat flour by Farinograph, Korean wheat flour showed less gluten network form ability than imported wheat flour. The dough making method affected bread quality such as weight of bread, specific volume, and baking loss. SDM had a more desirable effect on bread quality. Crumb color was lighter in bread made with Korean wheat flour compared to imported wheat flour, whereas dough making method did not affect crumb color. In consumer acceptance analysis, bread made by DSM showed higher consumer acceptance than that made by SDM. Regarding physicochemical changes during storage, bread made by SDM using Korean wheat flour showed higher chewiness, brittleness, and hardness than that made by imported wheat flour. However, bread made by DSM showed similar chewiness as bread made by SDM using imported wheat flour. The bread making properties of bread made by DSM is improved versus that of bread made with Korean wheat flour.

• Journal of the Korean earth science society
• /
• v.32 no.4
• /
• pp.388-401
• /
• 2011

Asian dust was observed a total of 66 times in the springtime during the period from 2002 to 2010, with 26 cases in March, 23 cases in April and 17 cases in May. This study investigates a Asian dust episode that occurred during the period from 22 to 25 May 2010, based on synoptic weather patterns, wind vector at 850 hPa, relative humidity at 1000 hPa, Jet streams and wind vector at 300 hPa, PM10 concentration in Korea and satellite imagery. In this case, Asian dust originated on 22 May along the rear of a developing low pressure system in Mongolia. The Asian dust was then transported southeastward and bypassed the Korea peninsula from 23 to 24 May, before reaching Japan on 25 May. Jet streams on 24 May bypassed the Korean peninsula and induced the development of a surface low pressure centered over the peninsula. The resulting air flow was critical to the trajectory of the Asian dust, which likewise bypassed the Korean peninsula. 72-hour backward trajectory data reveal that the Shandong Peninsula and the East China Sea were the points of origin for the air flows that swept through the Japanese sites where Asian dust was observable to the naked eay. The Asian dust pathway is ascertained by horizontal distribution of the Asian dust of RGB imagery from MODIS satellites which captured the Asian dust moving over the Shandong Peninsula, the East China Sea, and northwest of the Kyushu region in Japan. Since the synoptic pattern and the transport way of the Asian dust case are far from typical ones, which Asian dust forecasting technique has long been based on, this study can be good example of exceptional Asian dust pattern and it will be used for more accurate Asian dust forecasting.

• Journal of the Korean earth science society
• /
• v.32 no.3
• /
• pp.276-293
• /
• 2011

In this study a modeling system consisting of Weather Research and Forecasting (WRF), Sparse Matrix Operator Kernel Emissions (SMOKE), the Community Multiscale Air Quality (CMAQ) model, and the CMAQ-Model of Aerosol Dynamics, Reaction, Ionization, and Dissolution (MADRID) model has been applied to estimate enhancements of $PM_{10}$ during Asian dust events in Korea. In particular, 5 experimental formulas were applied to the WRF-SMOKE-CMAQ (MADRID) model to estimate Asian dust emissions from source locations for major Asian dust events in China and Mongolia: the US Environmental Protection Agency (EPA) model, the Goddard Global Ozone Chemistry Aerosol Radiation and Transport (GOCART) model, and the Dust Entrainment and Deposition (DEAD) model, as well as formulas by Park and In (2003), and Wang et al. (2000). According to the weather map, backward trajectory and satellite image analyses, Asian dust is generated by a strong downwind associated with the upper trough from a stagnation wave due to development of the upper jet stream, and transport of Asian dust to Korea shows up behind a surface front related to the cut-off low (known as comma type cloud) in satellite images. In the WRF-SMOKE-CMAQ modeling to estimate the PM10 concentration, Wang et al.'s experimental formula was depicted well in the temporal and spatial distribution of Asian dusts, and the GOCART model was low in mean bias errors and root mean square errors. Also, in the vertical profile analysis of Asian dusts using Wang et al's experimental formula, strong Asian dust with a concentration of more than $800\;{\mu}g/m^3$ for the period of March 31 to April 1, 2007 was transported under the boundary layer (about 1 km high), and weak Asian dust with a concentration of less than $400\;{\mu}g/m^3$ for the period of 16-17 March 2009 was transported above the boundary layer (about 1-3 km high). Furthermore, the difference between the CMAQ model and the CMAQ-MADRID model for the period of March 31 to April 1, 2007, in terms of PM10 concentration, was seen to be large in the East Asia area: the CMAQ-MADRID model showed the concentration to be about $25\;{\mu}g/m^3$ higher than the CMAQ model. In addition, the $PM_{10}$ concentration removed by the cloud liquid phase mechanism within the CMAQ-MADRID model was shown in the maximum $15\;{\mu}g/m^3$ in the Eastern Asia area.

• Journal of Bio-Environment Control
• /
• v.26 no.3
• /
• pp.181-187
• /
• 2017

The purpose of this study was to provide basic data for development of environmental design technology for greenhouses constructed in reclaimed lands. The climatic conditions around seven major reclaimed land areas with a plan to install advanced horticultural complexes in Korea were analyzed. The characteristics of natural ventilation and temperature rise through the thermal environment measurement of the greenhouse in Saemangeum were analyzed. The part to be applied to the environmental design of the greenhouses in reclaimed lands were reviewed. Results of comparing the ventilation rate of the greenhouse according to the presence or absence of plants showed the greenhouse with plants had the lower ventilation rate, but the smaller rise of indoor temperature due to the evapotranspiration of plants. In the greenhouse with plants, the number of air changes was in the range of 0.3 to 0.9 volumes/min and the average was 0.7 volumes/min. The rise of indoor temperature relative to outdoor temperature was in the range of 1 to $5^{\circ}C$ and the average $2.5^{\circ}C$. The natural ventilation performance of the experimental greenhouse constructed in the reclaimed land almost satisfied the recommended ventilation rate in summer and the rise of indoor temperature relative to outdoor temperature did not deviate considerably from the cultivation environment of plants. Therefore, it was determined that the greenhouse cultivation in Saemangeum reclaimed land is possible with only natural ventilation systems without cooling facilities. As the reclaimed land is located in the seaside, the wind is stronger than the inland area, and the fog is frequent. This strong wind speed increases the ventilation rate of greenhouses, which is considered to be a factor for reducing the cooling load. In addition, since the fog duration is remarkably longer than that of inland area, the seasonal cooling load is expected to decrease, which is considered to be advantageous in terms of the operation cost of cooling facilities.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.2
• /
• pp.199-204
• /
• 2006

This study was conducted to investigate the quality characteristics of noodles prepared with the addition of nanofiltered (NF) powder of sunmul. Noodles were prepared with different levels $(0\%,\;1.5\%,\;3\%\;and\;5\%,\;w/w)$ of NF powder and physico-chemical properties were examined. Results of rapid visco analyzer showed that peak, trough, final viscosity and set back decreased as the NF powder level increased. The weight and volume of cooked noodles increased with the addition of NF powder. Turbidity of soup also increased as the amount of NF powder increased, indicating higher cooking loss. The color of wet and cooked noodles became greenish yellow as the NF powder level increased. Hardness, springiness, gumminess and brittleness of cooked noodles decreased with the increasing amount of NF powder. Results of sensory evaluation showed that noodles prepared with up to $3\%$ addition of NF powder was considered to be as acceptable as noodles prepared without NF powder.

• Korean Journal of Remote Sensing
• /
• v.32 no.6
• /
• pp.721-732
• /
• 2016

The accuracy and error characteristics of microwave Sea Surface Temperature (SST) measurements in the Northwest Pacific were analyzed by utilizing 162,264 collocated matchup data between GCOM-W1/AMSR2 data and oceanic in-situ temperature measurements from July 2012 to August 2016. The AMSR2 SST measurements had a Root-Mean-Square (RMS) error of about $0.63^{\circ}C$ and a bias error of about $0.05^{\circ}C$. The SST differences between AMSR2 and in-situ measurements were caused by various factors, such as wind speed, SST, distance from the coast, and the thermal front. The AMSR2 SST data showed an error due to the diurnal effect, which was much higher than the in-situ temperature measurements at low wind speed (<6 m/s) during the daytime. In addition, the RMS error tended to be large in the winter because the emissivity of the sea surface was increased by high wind speeds and it could induce positive deviation in the SST retrieval. Low sensitivity at colder temperature and land contamination also affected an increase in the error of AMSR2 SST. An analysis of the effect of the thermal front on satellite SST error indicated that SST error increased as the magnitude of the spatial gradient of the SST increased and the distance from the front decreased. The purpose of this study was to provide a basis for further research applying microwave SST in the Northwest Pacific. In addition, the results suggested that analyzing the errors related to the environmental factors in the study area must precede any further analysis in order to obtain more accurate satellite SST measurements.