• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.83-85
• /
• 2008

본 논문은 변압기의 대부분 고장원인이 되는 권선 간의 단자 시 발생하는 진동을 수치적으로 계산하고 전자력 계산을 위한 방법으로 Pseudospectral Method을 적용하여 단락권선사이의 강제진동해석을 수행하였다. 나선형권선의 방정식은 Chebyshev다항식 시리즈의 확장과 Gauss-Lobatto collocation 과정을 수행되어진다. 알고리즘 검증을 위하여 22.9kV/220V, 1000kVA 용량의 케이블 타입의 변압기의 FEM 시물레이션 결과와 이론적 수치적계산과 함께 비교하였다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.10 s.115
• /
• pp.1050-1056
• /
• 2006

In this paper, a new method for the stability analysis of a pipe conveying fluid which pulsates periodically is presented. The finite element model is formulated liking into consideration of the effects of the fluid pulsating in a pipe. The damping and stiffness matrices in the finite element equation vary with time due to pulsating fluid. Coupled effects of several harmonic components in the velocity of fluid to a pipe is discussed. A new unstable region appears which will not appear in the stability analysis of single pulsating frequency. A method to directly estimate the forced response of pipe is also discussed. The results presented in this paper are verified by the time domain analysis.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.1 no.1
• /
• pp.41-49
• /
• 1997

This paper presents the result of an international cooperative research on the post-correlation analysis of forced vibration tests and the prediction of earthquake responses of a large-scale seismic test structure. The dynamic analysis is carried out using the axisymmetric finite element method incorporating in finite elements for the for field soil region. Through the post-correlation analysis, the properties of the soil layers are revised so that the best correlation in the responses may be obtained compared with the measured force vibration test data. Utilizing the revised soil properties as the initial linear values, the seismic responses are predicted for an earthquake using the equivalent linearlization technique. It has been found that the predicted responses by the equivalent nonlinear procedure are in excellent agreement with the observed responses, while those using the linear properties are fairly off from the measured results.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.8 no.4
• /
• pp.67-75
• /
• 2004

It is essential to develop a transient analysis model for the turbopump-fed type liquid rocket engine development, especially for deriving the number of test and its parameters. In this study we proposed a mathematical model of turbopump-fed type liquid rocket engine, and inspected transient mode changes of a rocket engine according to variations of thrust control valve opening ratio. To verify the results, we solved the same problem with AnaSyn software from Russia, and concluded that the results of transient code we developed deviated within 2% from AnaSyn results. Also, using the transient engine analysis code we showed the possibility to find out the system level design Parameters of the components. For example, we modeled a pressure stabilizer which is used to control the consistency of mixture ratio in the gas generator as forced damping system, and found the stability range of the natural frequency and the damping ratio with the transient engine system analysis code.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.40 no.11
• /
• pp.948-956
• /
• 2012

This paper presents the computations of the longitudinal and directional stability derivatives for the SDM(Standard Dynamic Model). The static and dynamic derivatives are evaluated at once using forced harmonic oscillations in the pitch and yaw directions. For the numerical simulations, a 3-D Euler solver that uses a dual time stepping method for unsteady time accurate simulations is applied. This work investigates the variation of the derivatives in terms of the Mach number and the several motion parameters. Good agreement of the pitch and yaw stability derivatives with previously published numerical results and experimental results are observed.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.743-748
• /
• 2016

Ship's diesel engines have intrinsic problem to make vibrations caused by cylinder explosion and unbalanced rotating mass. These vibrations might induce noises, are transferred to hull and neighboring structures and cause secondary vibrations. This paper suggests the use of an additional dynamic absorber with a sub-vibration system to reduce the aforementioned vibrations. This dynamic absorber is designed based on an analysis of the free vibration of the engine shafting system and the forced vibrations.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.214-215
• /
• 2009

The friction is inevitable and unpredictable phenomena, so most mechanical systems are designed to low friction effect by using bearings and lubricants. However, the slip-stick actuator applies the friction force to its movement. The slip-stick mechanism is applied the piezoelectric actuator to overcome short displacement. Fast response of piezoelectric actuator is also good characteristic for the slip-stick mechanism. However, the piezoelectric actuator with slip-stick mechanism isn't common, because its cost and driving voltage are too high. In this paper, a voice-coil actuator with slip-stick mechanism is introduced. The cost and the driving voltage of a voice-coil actuator are much less than the piezoelectric actuator. And a dynamic vibration amplifier is proposed to adjust the dynamic performance of the actuator. By the results of numerical analysis, the feasibility of a dynamic vibration amplifier is verified.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.4
• /
• pp.1251-1262
• /
• 1996

In this paper, a mathematical model for a belt driven system is proposed to analyse the vibration characteristics of the driving units with belts and the free and forced vibraiton anlyses are carried out. The mathematical model for a belt-driven system includes belts, pulleys, spindle and bearings. By using Hamilton's principle, four nonlinear governing equations and twelve nonlinear boundary conditions are derived. To linearize and discretize the nonlinear governing equations and boundary conditions, the perturbation method and Galerkin method are used. Also, the free vibration analyses for various parameters of a belt driven system, which are the tension of a belt, the length of a belt, the material properties of belts, the velocity of a velt and the mass of pulley are made. The forced vibration analyses of the system are performed and the dynamic responses for main parameters are anlysed with a belt driven system.

• Journal of KSNVE
• /
• v.3 no.4
• /
• pp.293-299
• /
• 1993

최근 토목, 건축재료 및 시공기술의 발전과 더불어 컴퓨터를 이용한 해석 기법의 개발, 경제규모의 확대, 주변환경과의 조화 및 미적감가의 끊임없는 추구는 구조물의 장대화, 연성화, 다양화는 물론 구조감쇠율의 감소 등을 가져옴으로서 바람에 의한 동적 거동의 영향이 증대되어 이에 대한 검토의 중요성이 크게 부각되기 시작하였다. 특히, 최근들어 활발히 계획, 공사중인 여러 현수교, 사장교 구조물 중 시공단계로서의 독립 tower, 발전소의 장대 굴뚝, 고층건물, 전망 tower, 공항 관제 탑 등이 좋은 예이다. 따라서 이들 구조물의 설계과정에서 제안된 여러형태의 진동 제어 방법중 수동 감쇠장치에 대하여 소개하기로 한다. 감쇠장치는 직접 외부에 부착 하는 강제 감쇠장치와 소량의 질량, 스프링과 감쇠장치들을 조합하여 부착하는 수동 감쇠장치가 있다. 수동감쇠장치는 소규모로서 유지보수가 거의 필요 없으며 외관의 변화가 거의 없고 저렴하다는 장점이 있다. 여러종류의 수동감쇠장치, 즉 TMD, IMD 그리고 TSD에 대한 개략적인 이론과 그 사용예에 대하여 설명하였다. 실험적 검증 및 실측결과 각 장치가 바람에 의해 야기되는 진동현상을 억제하는데 매우 유효한 것으로 판정되었고 또한 크기가 소규모일 뿐 아니라 유지보수가 거의 없으며 비용도 저렴하여 국내 건설 또는 건설예정인 유사구조물에도 많은 적용이 예상된다.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.1
• /
• pp.63-72
• /
• 1990

The linear hydrodynamic forces, acting on a forced oscillating cylinder from its mean position on a free surface with a small amplitude, are calculated in the time domain. The integral equation method using a time dependent Green function is employed. The numerical results for the heaving and swaying circular cylinder are shown and give good agreements with others Furthermore it is shown that the use of the Green function, which is expressed by a series expansion or asymptotic expansion according to time range, reduces computing time greatly.