• Journal of Advanced Navigation Technology
• /
• v.13 no.5
• /
• pp.756-762
• /
• 2009

As nonlinear friction, stick-slip friction in hydraulic actuators are a problem for accuracy and repeatability. Therefore friction compensation has been approached through various control algorithms. A Adaptive discrete time sliding mode tracking controller has been applied in order to compensate the nonlinear friction characteristics in a hydraulic Actuator. Based on the diophantine equation, a new discrete time sliding function is defined and utilized for the control law which includes a friction and modeling error. Robustness is increased by using both a projection algorithm and a sliding function-based nonlinear feedforward. From the results of simulation and experiment good tracking performance is achieved.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.8
• /
• pp.1759-1766
• /
• 2010

The performance of noise attenuation of the adaptive active noise control algorithm is improved using the recurrent neural network. The FXLMS that has been frequently used in the active noise control is simple and has low computational load, but this method is weak to nonlinearity of the main or secondary path since it is based on the FIR linear filter method. In this paper, the recurrent neural network filter has been developed and applied to improvement of the active noise attenuation by simulation.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.13-15
• /
• 2006

센서리스 제어를 위한 상태 관측기의 설계시 기존의 바이너리 관측기의 성능을 향상시키기 위해 스위칭 평면에 적분항을 추가함으로서 정상상태의 성능을 향상시킬 수 있다. 또한 전동기의 관성계수나 마찰계수와 같은 운동방정식의 파라미터들은 계측하기 어려우며 관측기의 성능저하를 야기하므로 실제구현에서도 많은 제약이 따른다. 이러한 문제를 해결하기 위해 적응 적분바이리 관측기를 제안하다. 그리고 정격속도 이상으로 구동하기 위해서 약계자 영역에서의 센서리스 제안한다. IPMSM이 w가 보다 높은 속도에서 운전되기 위해서는 정격전압이상의 입력이 요구되어진다. 그러나 정격전압에서 d축 전류가 회전자 자속을 감소시키는 방향으로 주입된다면 더 높은 속도에서 운전되어질 수 있다.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2002.12a
• /
• pp.131-134
• /
• 2002

일반적인 산업현장에서 많이 사용되는 이중탱크 시스템은 동작점 근방에서 선형화하는 고전제어기법을 사용한 것으로서 큰 시간지연과 비선형성으로 인해 정확한 수학적 모델링이 어렵고 모델링을 하더라도 넓은 동작 영역에서 만족스로운 결과를 얻기 어렵다. 따라서, 비교적 모델링에 대한 의존도가 낮은 퍼지, 신경회로망, 유전알고리즘 등의 지능제어 기법들도 제안되고 있다. 그러나 이들 제어기 역시 외란이나 다양한 동작 모드들에 따른 제어기 변수들의 적응성 저하로 인해 안정화 가능 영역이 협소해 지는 것은 물론 시스템의 불안정 현상도 초래한다. 이에 반해, SMC(sliding mode controller)는 변수의 변동, 외란에 둔감한 강점을 갖고 있지만, 시스템의 상태에 따른 슬라이딩 평면 설정의 곤란성과 채터링(chattering)이 존재하는 문제점 이 있다. 따라서 본 논문에서는 이중 탱크 시스템의 정밀한 수위 제어를 위하여, GA과 FLC를 사용하여 최적 변수로 설정 할 수 있게 하고, 채터링 저감을 위해 시스템 동특성 변동과 외란 에 강인한 GA-FSMC(genetic algorithm fuzzy sliding mode controller)를 제안하였다. 시뮬레이션을 통해 종래의 제어기의 제어결과와 비교함으로써 제안하는 GA-FSMC의 우수성을 입증하고자 한다.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.12
• /
• pp.89-99
• /
• 2008

In this paper, the position tracking control problem of the servo system with nonlinear dynamic friction is issued. The nonlinear dynamic friction contains a directly immeasurable friction state variable and the uncertainty caused by incomplete parameter modeling and its variations. In order to provide the efficient solution to these control problems, we propose the composite control scheme, which consists of the robust friction state observer, the FNN approximator and the approximation error estimator with sliding mode control. In first, the sliding mode controller and the robust friction state observer is designed to estimate the unknown internal state of the LuGre friction model. Next, the FNN estimator is adopted to approximate the unknown lumped friction uncertainty. Finally, the adaptive approximation error estimator is designed to compensate the approximation error of the FNN estimator. Some simulations and experiments on the servo system assembled with ball-screw and DC servo motor are presented. Results show the remarkable performance of the proposed control scheme. The robust friction state observer can successfully identify immeasurable friction state and the FNN estimator and adaptive approximation error estimator give the robustness to the proposed control scheme against the uncertainty of the friction parameters.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.3
• /
• pp.64-69
• /
• 2007

Motion control of the system is a position control of motor. Motion control of an uncertain robot system is considered as one of the most important and fundamental research directions in the robotics. Some distinguished works using linear control, adaptive control, robust control strategies based on computed torque methodology have been reported. However, it is generally recognized within the control community that these strategies suffer from the following problems : the exact robot dynamics are needed and hard to implement, the adaptive control cannot guarantee the performance during the transient period for adaptation under the variation, the robust control algorithms such as the sliding mode control need information on the bounds of the possible uncertainty and disturbance. And it produces a large control input as well. In this dissertation, a motion control for the unmanned intelligent robot system using disturbance observer is studied. This system is affected with an impact vibration disturbance. This paper describes a stable motion control of the system with the consideration of external disturbance. To obtain the stable motion independently against the external disturbance, the disturbance rejection is strongly required. To address the above issue, this paper presents a Disturbance OBserver(DOB) control algorithm. The validity of the suggested DOB robust control scheme is confirmed by several computer simulation results. And the experiments with a motor system is performed to give the validity of applicability in the industrial field. This results make the easier implementation of the controller possible in the field.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.10a
• /
• pp.186-194
• /
• 2003

This paper proposes a combined controller frame of the adaptive robust control(ARC) and the sliding mode control(SMC) for the trajectory tracking control of the excavator to preserve the advantages of the both methods while overcoming their drawbacks, namely, asymptotic stability of adaptive system fir parametric uncertainties and guaranteed transient performance of sliding mode control for both parametric uncertainties and external disturbance. The suggested control technique is applied for the tracking of a straight-line motion of end-effector of manipulators, and through computer simulations, its trajectory tracking performances and the robustness to payload variation and uncertainties are illustrated.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.7
• /
• pp.605-613
• /
• 2001

In this paper, we design a robust adaptive controller for a nonlinear system with uncertainties to be rejected via disturbance adaptation law. The nonlinear system considered has unknown nonlinear functions being influenced by external disturbance. The upper bound of unknown nonlinear functions at each time is estimated by using a disturbance adaptation law. The estimated nonlinear functions are used to design a stabilizing function a control input. Tuning function is used to estimates unknown system parameter without overparametrization. A set-point regulation error converges to a residual set close to zero asymptotically. The effectiveness of the proposed controller is investigated by computer simulation.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1998.03a
• /
• pp.35-38
• /
• 1998

Abstracts In this paper, we propose a robust adaptive fuzzy control scheme using a sliding control input for tracking of a class of MISO nonlinear systems with unknown bounded external disturbances. In the proposed scheme, the nonlinearity is estimated adaptively via a fuzzy inference based on a fuzzy model. A sliding control input is introduced such that boundedness of all signals in the system is guaranteed even though the existence of a fuzzy approximation error and external disturbances. The controller parameters are updated by using a proposed adaptation law, which is similar 1-modification method. Computer simulation shows the effectiveness of the proposed control scheme.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.54 no.2
• /
• pp.80-88
• /
• 2005

In this paper, an robust adaptive backstepping controller is proposed for the speed control of separately excited DC motor with uncertainties and disturbances. Armature and field resistance, damping coefficient and load torque are considered as uncertainties and noise generated at applying load torque to motor is also considered. It shows that the backstepping algorithm can be used to solve the problems of nonlinear system very well and robust controller can be designed without the variation of adaptive law. Simulation and experiment results are provided to demonstrate the effectiveness of the proposed controller.