• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.7
• /
• pp.1414-1420
• /
• 1994

In this paper the existence of chaotic signal is probed in adaptive dead beat control law for nonlinear dynamic system. These chaotic signal makes the system unstable and difficult to control, but it broaden the range of application, confirms the robustness of system and gives a lot of information. Considering of low correlation between chaotic signals, robust adaptive control method which uses for parameter estimation is proposed. With this algorithm the parameters converges stable rapidly. Finally the superiority of it is proved by computer simulation.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.37 no.11
• /
• pp.720-726
• /
• 1988

This paper deals with an applicaton of some adaptive algorithms to a heat exchanger using a microcomputer and reviews the experimental results obtained. The heat exchanger prepared for experments was identified as a non-minimum phase system and its exact mathematical models was hardly obtainable with direct computation. Thus, classical strategies, such as PID, needed many trial and errors to determine parameters of the controllers. Furthermore such strategies could not guarantee good performance when system parameters vary. To overcome these difficulties and improve performance, two adaptive methods applicable to a non-minimum phase system were chosen and put to the test. In this paper the performance of adaptive controllers is compared with that of conventional PID controller. The final objective of this paper is to construct a controller readily applicable to industrial processes using a microprocessor.

• Proceedings of the KIEE Conference
• /
• 1985.07a
• /
• pp.95-97
• /
• 1985

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1413-1422
• /
• 2012

Adaptive back stepping control technique may provide robust control characteristics under parameter perturbation caused by changing external condition. In order to synthesize a high-precision velocity controller for IPMSM(Interior Permanent Magnet Synchronous Motor) using this method, the period of control loop should be very small. However, because of the resolution of the encoder for speed measurement, control cycle is limited, which makes it difficult to improve the performance of the controller. This paper proposes a velocity controller design method based on nonlinear adaptive back-stepping method to accomplish fast and accurate performance. Here, an EKF(Extended Kalman Filter) method is incorporated for the estimation of the motor speed into the design of a speed controller using adapted back-stepping control technique. The performance of the proposed controller is demonstrated through simulation using PSIM.

• Journal of IKEEE
• /
• v.9 no.1 s.16
• /
• pp.72-78
• /
• 2005

This paper describes the design of a robust output-feedback controller for a single-input single-output nonlinear dynamical system with a full relative degree. While all the previous research works on the output-feedback control are based on dynamic observers, a new state estimator which uses the past values of the measurable system output is proposed. We name it backward-difference state estimator since the derivatives of the output are estimated simply by backward difference of the present and past values of the output. The disturbance generated due to the error between the estimated and real state variables is compensated using an additional robustifying control law whose gain is tuned adaptively. Overall control system guarantees that the tracking error is asymptotically convergent and that all signals involved are uniformly bounded. Theoretical results are illustrated through a simulation example of inverted pendulum.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.3
• /
• pp.53-61
• /
• 2006

This paper is proposed adaptive fuzzy-neuro controller for high performance of induction motor drive. The design of this algorithm based on fuzzy-neural network controller that is implemented using fuzzy control and neural network. This controller uses fuzzy nile as training patterns of a neural network. Also, this controller uses the back-propagation method to adjust the weights between the neurons of neural network in order to minimize the error between the command output and actual output. A model reference adaptive scheme is proposed in which the adaptation mechanism is executed by fuzzy logic based on the error and change of error measured between the motor speed and output of a reference model. The control performance of the adaptive fuzzy-neuro controller is evaluated by analysis for various operating conditions. The results of experiment prove that the proposed control system has strong high performance and robustness to parameter variation, and steady-state accuracy and transient response.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2052-2054
• /
• 2003

본 논문에서는 혼돈 비선형 시스템의 지능 제어를 위해 간접 적응 제어 기법에 기반한 웨이블릿 신경 회로망 제어기 설계 방법을 제안한다. 제어기 성능에 큰 영향을 미칠 수 있는 웨이블릿 신경 회로망 구조의 파라미터 동정은 본질적으로 강인하고 전역 최적해에 근사한 값을 결정할 수 있는 유전 알고리듬을 사용한다. 본 논문에서 제안한 제어 방법은 유전 알고리듬을 이용한 혼돈 비선형 시스템의 오프라인 동정 모델 및 기준 신호와 플랜트 출력으로 정의되는 제어 오차를 이용하여 원하는 제어 입력을 생성한다. 한편 본 논문에서 제안한 웨이블릿 신경 회로망 제어기를 대표적인 연속 시간 혼돈 비선형 시스템인 Duffing 시스템에 적용하여 설계된 제어기의 효율성 및 우수성을 검증하고자 한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.788-791
• /
• 2006

Fuzzy theory has been used effectively to control the nonlinear system since Mamdani successively adopted fuzzy theory in the steam-engine control problem in 1973. Truckbacker-upper control problem originally proposed by Nguyen and Widrow become a standard highly nonlinear control problem. In this paper, we designed adaptive fuzzy membership functions for speed control as well as steering control. In other words, an adaptive fuzzy control system for truck backer-upper problem useful for practical adaptation is proposed. Experimental results by simulations prove the effectiveness of the proposed system.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.48 no.4
• /
• pp.17-24
• /
• 2011

This paper presents a control scheme to cancel periodic disturbance with unknown frequency for optical disc drives. The control scheme consists of an output regulator and a frequency adaptive algorithm. Here, the frequency adaptive algorithm based on IMP plays a role in obtaining a frequency of periodic disturbance. The stability analysis of whole system and disturbance rejection performance are proven by the singular perturbation theory. The contribution of this paper are as follows. (1) There is no design constraints of the frequency range. (2) Ability for perfect disturbance rejection is preserved even with uncertain plant model.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.11
• /
• pp.5194-5201
• /
• 2011

In this paper, an adaptive nonlinear friction compensation scheme for second-order nonlinear mechanical system with a partially known nonlinear dynamic friction is proposed to achieve asymptotic position and velocity tracking in the absence of disturbances and modeling errors. It is also shown that even with disturbances and modeling errors, in contrast to existing other adaptive control schemes, by proper adjustment of design parameters, reduced error bounds on position and velocity tracking can be achieved.