• Proceedings of the KAIS Fall Conference
• /
• 2011.12b
• /
• pp.547-550
• /
• 2011

본 논문에서는 부하변동에 대해 강인한 제어기를 구현하기 위해 PI제어기에 feedforward 외란상쇄관측기를 부가하여 구현하였다. 이로 인해 외란 변동 등의 상황에서 보다 안정적인 동작을 할 수 있도록 제안하였다. 이를 입증하기 위하여 Matlab으로 시스템의 안정도에 대해 시뮬레이션을 수행하였고, 5[Hp] 유도전동기에 대해 실험을 수행하여 제안한 시스템의 유용성을 확인하여 보았다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.4
• /
• pp.403-408
• /
• 2000

In this paper, voltage control APF(Active Power Filter) is introduced to improve power factor and reduce harmonics generated from nonlinear load. The voltage controlled APF which is consisted of inverter and passive filter operates with nonlinear load simultaneously. Real power supplies from main power to load and reactive power provides from APF to load. According to the results o experiment and simulation, it is proved that the proposed system has the performance of improving power factor and reducing harmonics.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.5
• /
• pp.420-429
• /
• 2004

This paper proposes a novel current control strategy on active power filters using PQR instantaneous power theory which can compensate the line current harmonics and the neutral line current under the unbalanced and/or distorted source conditions in three-phase four-wire systems. The characteristics of the inverter ac filters are analyzed and a novel digital controller are proposed to overcome the inherent time delay problem in digital controllers with designed control gain in this paper. The proposed current control method is based on a sinusoidal PWM for fully-digital implementation compared with a conventional hysteresis PWM. PSiM simulation results verify the good performance of the proposed current control strategy on shunt type APFs.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.11b
• /
• pp.919-921
• /
• 2005

본 논문에서는 무선 카메라를 장착한 소형 로봇의 영상처리를 통한 물체추적 방법을 제시한다. 본 연구는 첫째, 물체와 배경 및 유사잡음들과의 강인한 분리를 위하여 고유색상정보와 움직임 정보등의 사전정보를 활용하였으며 둘째, 형태의 변화가 수반되는 경우에도 유연한 대처능력을 갖도록 하기 위해 영상의 영역분할 방법을 통해 모든 후보영역내의 물체의 존재를 확인하고 물체영역만을 추출하였다. 셋째, 잡음이나 불필요한 요소들에 강인하고 안정적인 추적을 위하여 물체 형태정보함수를 정의하고 해당함수를 형태의 보전 에너지와 제어점으로 활용하여 동일 물체의 대응문제를 효과적으로 해결하였다. 동작의 검증을 위해 사용한 전체 프레임을 통해 약 $86\%$의 추적성공율을 보였다.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.1842-1845
• /
• 2006

본 논문에서는 차량용 전자제어식 주차 브레이크(Electric Parking Brake, EPB) 시스템 제어에 효과적인 제어기를 논의한다. 이를 위하여 EPB 시스템의 동작 요건과 고유 특성을 고려하여 제어 사양을 정하고 이를 만족시키는 세 가지 제어기(Bang-bang, 선형 P, 비선형 P 제어기)를 제안한다. 또한 제안된 제어기들의 특성 및 성능을 과도응답과 강인성 측면에서 분석하였다. 이를 위해 EPB 시스템을 주파수 영역과 시간 영역에서 모델링하고, 설계된 제어기들의 성능을 모의실험을 통해 비교, 검증한다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.2 s.314
• /
• pp.24-31
• /
• 2007

This paper presents self tuning PI(STPI) controller of IPMSM drive using neural network. In general, PI controller in computer numerically controlled machine process fixed gain. They may perform well under some operating conditions, but not all. To increase the robustness of fixed gain PI controller, STPI controller proposes a new method based neural network. STPI controller is developed to minimize overshoot, rise time and settling time following sudden parameter changes such as speed, load torque and inertia. Also, this paper is proposed speed control of IPMSM using neural network and estimation of speed using artificial neural network(ANN) controller. The back propagation neural network technique is used to provide a real time adaptive estimation of the motor speed. The results on a speed controller of IPMSM are presented to show the effectiveness of the proposed gain tuner. And this controller is better than the fixed gains one in terms of robustness, even under great variations of operating conditions and load disturbance.

• Journal of the Korea Computer Graphics Society
• /
• v.23 no.3
• /
• pp.105-113
• /
• 2017

This paper presents a novel on-line trajectory optimization framework based on automatic time warping, which performs the time warping of a reference motion while optimizing character motion control. Unlike existing physics-based character animation methods where sampling times for a reference motion are uniform or fixed during optimization in general, our method considers the change of sampling times on top of the dynamics of character motion in the same optimization, which allows the character to effectively respond to external pushes with optimal time warping. In order to do so, we formulate an optimal control problem which takes into account both the full-body dynamics and the change of sampling time for a reference motion, and present a model predictive control framework that produces an optimal control policy for character motion and sampling time by repeatedly solving the problem for a fixed-span time window while shifting it along the time axis. Our experimental results show the robustness of our framework to external perturbations and the effectiveness on rhythmic motion synthesis in accordance with a given piece of background music.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.4
• /
• pp.719-724
• /
• 2021

In this paper, we studied properties of smart farms that can automatically control not only the temperature and humidity but also the illumination to improve plant productivity. The smart farm was designed to allow the controllers to operate through Arduino by receiving input values from each sensor. In addition, to maximize the convenience of smart farm, the Bluetooth communication module is used to control the smart phone. The study confirmed that the automation function of smart farms can create an environment suitable for plants to grow.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.1
• /
• pp.1-11
• /
• 2007

In this paper, a new fully digital control method for UPS inverter, which is based on the double control loop such as the outer voltage control loop and inner current control loop, is proposed. In the proposed control system, overshoots and oscillations due to the computation time-delay are compensated by explicit incorporation of the time-delay in the current control loop transfer function. The inner current control loop is adopted by an internal model controller. The internal model controller is designed to a second order deadbeat reference-to-output response which means that its response reaches the reference in two sampling time including computational time-delays. The outer voltage control loop employing P-Resonance controller is proposed. The resonance controller has an infinite gain at resonant frequency, and the resonant frequency is set to the fundamental frequency of the reference voltage in this paper. Thus the outer voltage control loop causes no steady state error as regard to both magnitude and phase. The effectiveness of the proposed control system has been verified by the simulation and experimental results respectively.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.2
• /
• pp.140-148
• /
• 2000

A robust current control technique with a simple time delayed estimator for a permanent magnet synchronous m motor (PMSM) drive is presented. Among the various CWTent control schemes for a voltage source inverter-fed P PMSM drive, the predictive control is known to give a superior performance. This control technique, however, r requires the full knowledge of machine parameters and operating conditions, and gives an unsatisfactory r response under the parameter mismatch between the motor and controller. To overcome such a limitation, the d disturbances caused by the parameter valiations will be estimated by using a" time delay contTol approach and u used for the computation of the reference voltages by a simple feedforwal"d control. The proposed control $ scheme is implemented on a PMSM using the software of DSP TlVIS:32OC:30 and the effectiveness is verified d through the comparative simulations and experiments.periments.