• The Transactions of the Korean Institute of Electrical Engineers
• /
• 제38권4호
• /
• pp.298-306
• /
• 1989

Robustness of adaptive pole-placement control against unmodeled dynamics is proved. This proof is done by showing that the sufficient condition for robustness, conic condition and stability of a specific operator, is satisfied for a larger set of unmodeled dynamics. The simulation results show the proposed method is quite powerful. And the difference between the concept of the pseudoplant control and the known internal model control is shown by the closed loop analysis.

• Journal of the Institute of Convergence Signal Processing
• /
• 제19권2호
• /
• pp.77-88
• /
• 2018

This paper proposes a RBFNN(Radial Basis Function Neural Network) based decentralized adaptive tracking control scheme using PSO(Particle Swarm Optimization) for an uncertain electrically driven robot system with input saturation. Practically, the magnitudes of input voltage and current signals are limited due to the saturation of actuators in robot systems. The proposed controller overcomes this input saturation and does not require any robot link and actuator model parameters. The fitness function used in the presented PSO scheme is expressed as a multi-objective function including the magnitudes of voltages and currents as well as the tracking errors. Using a PSO scheme, the control gains and the number of the RBFs are tuned automatically and thus the performance of the control system is improved. The stability of the total control system is guaranteed by the Lyapunov stability analysis. The validity and robustness of the proposed control scheme are verified through simulation results.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• 제18권1호
• /
• pp.50-58
• /
• 2009

For precise tracking control of a servo system with nonlinear friction, a robust friction compensation scheme is presented in this paper. The nonlinear friction is difficult to identify the friction parameters exactly through experiments. Friction parameters can be also varied according to contact conditions such as the variation of temperature and lubrication. Thus, in order to overcome these problems and obtain the desired position tracking performance, a robust adaptive back-stepping control scheme with a dual friction observer is developed. In addition, to estimate lumped friction uncertainty due to modeling errors, a DEKF recurrent neural network and adaptive reconstructed error estimator are also developed. The feasibility of the proposed control scheme is verified through the experiment fur a ball-screw system.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 한국공작기계학회 1996년도 추계학술대회 논문
• /
• pp.150-155
• /
• 1996

This paper presents a new approach to the design of self-tuning adaptive control system that is robust to the changing dynamic configuration as well as to the load variation factors using digital signal processors for robot manipulators. TMS3200C50 is used in implementing real-time adaptive control algorithms provide advanced performance for robot manipulator. In this paper an adaptive control scheme is proposed in order to design the pole-placement self-tuning controller which can reject the offset due to any load disturbance without a detailed description of robot dynamics. parameters of discrete-time difference model are estimated by the recursive least-square identification algorithm and controller parameters are detemined by the pole-placement method. Performance of self-tuning adaptive controller is illusrated by the simulation and experiment for a SCARA robot.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.72-74
• /
• 2003

유도전동기의 가변속 구동시스템에서 자속 축 기준제어를 이용하는 경향이 증가하고 있으며 설치환경, 가격 등의 제약으로 인하여 위치 및 속도센서가 없는 센서리스 속도제어가 많이 연구되고 있다. 본 논문은 유도전동기의 센서리스 제어에 관한 연구로서 과도상태에서 슬라이딩모드 관측기를 사용함으로써 속응성이 빠르고 파라미터의 변동에 강인하며, 정상상태에서는 적응상태관측기를 사용함으로써 채터링을 감소하는 센서리스 제어를 제시한다. 시뮬레이션 및 실험결과에서 과도상태와 정상상태에서 양호한 성능을 나타내었다.

• The Transactions of the Korean Institute of Power Electronics
• /
• 제10권3호
• /
• pp.282-289
• /
• 2005

This paper proposes a fuzzy neural network controller based on the vector control for interior permanent magnet synchronous motor(IPMSM) drive system. The hybrid combination of neural network and fuzzy control will produce a powerful representation flexibility and numerical processing capability This paper does not oかy presents speed control of IPMSM using neuro-fuzzy control(NFC) but also speed estimation using artificial neural network(ANN) controller. The back propagation neural network technique is used to provide a real time adaptive estimation of the motor speed. The error between the desired state variable and the actual one is back-propagated to adjust the rotor speed, so that the actual state variable will coincide with the desired one. The back propagation mechanism is easy to derive and the estimated speed tracks precisely the actual motor speed. Thus, it is presented the theoretical analysis as well as the analysis results to verify the effectiveness of the proposed method in this paper.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• 제54권2호
• /
• pp.80-88
• /
• 2005

In this paper, an robust adaptive backstepping controller is proposed for the speed control of separately excited DC motor with uncertainties and disturbances. Armature and field resistance, damping coefficient and load torque are considered as uncertainties and noise generated at applying load torque to motor is also considered. It shows that the backstepping algorithm can be used to solve the problems of nonlinear system very well and robust controller can be designed without the variation of adaptive law. Simulation and experiment results are provided to demonstrate the effectiveness of the proposed controller.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 D
• /
• pp.1864-1865
• /
• 2006

무인지능형로봇 시스템에 있어서 자세의 정확도를 향상시키기 위한 많은 연구가 이루어져 왔다. 시스템의 자세 제어는 사용되는 모터의 위치 제어로 대응된다. 이와 같은 시스템은 운용 시에 충격 진동이 발생하게 된다. 이러한 충격 진동 외란을 잘 제거해야 요구되는 위치 정도로 제어를 수행할 수 있다. 로봇 제어 분야에서 불확실한 로봇에 대한 자세 제어 분야는 가장 기본적이면서 중요한 분야중의 하나이다. 이러한 문제를 다루기 위하여 계산 토크 방식에 기초한 선형 제어 기법이나 적응 제어 기법, 강인 제어 기법 등을 이용한 연구 결과들이 발표되고 있다. 그러나 그러한 기법은 일반적으로 로봇의 정확한 동력학식을 알아야 하며, 구현하기 복잡하다. 따라서 본 논문에서는 적응 규칙에 의하여 모델의 불확실성, 시스템의 변화, 외란으로 인해 발생하는 공칭 플랜트와의 오차를 보상하도록 제어 입력을 생성하는 내부 루프 부분과 공칭 플랜트 모델의 명령을 추종하도록 하는 제어 입력을 생성하는 외부 루프 부분으로 구성되는 방법인 외란관측기(Disturbance OBserver : DOB) 제어 알고리즘을 제안한다. 또한 프로세서의 신뢰성과 수치 연산 및 알고리즘의 빠른 처리를 위해 현재 사용 빈도가 높은 TI사의 DSP시리즈 중에서 부동 소수점 연산 기능을 가지면서 모터 제어에 적합한 TMS320C2000계열의 TMS320F2812을 사용하여, 운용 시 발생되는 진동 둥에 대한 외란 제거를 목적으로 한다. 본 논문은 규명된 시스템 모델식을 바탕으로 DOB 제어 시뮬레이션을 수행하고 PMSM 모터모델 시뮬링크 블록을 구성하여 검증된 외란 관측기 제어 알고리즘을 검증한다. 시뮬레이션으로 검증된 DOB 모터 자세 제어 알고리즘을 DSP에 적용하기 위해 코드변환하고 모터 실험 시스템에 실제 적용함으로써 타당성을 검증하여 상용 제어기로 실제 현장에 적용 가능함을 입증한다.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 1988년도 추계학술대회 논문집 학회본부
• /
• pp.80-83
• /
• 1988

In this paper a robust control law is presented which stabilezes overall system via pole reassignment and loop-shaping. A robust adaptive controller is designed combining this robust control law and a robust estimator.

• Journal of the Korean Institute of Telematics and Electronics
• /
• 제25권12호
• /
• pp.1610-1617
• /
• 1988

In this paper, a robust discrete-time adaptive control with compensation is proposed for single-input single-output discrete-time plants which have unmodeled dynamics. The stability of the overall system is studied using the conic sector stability theorems when a normalized constant gain parameter adaptation algorithm and a properly chosen compensation are used. An illustrative exmple shows that this compensation can also increase the parameter adaptation speed. And a method of compensation using the adaptive observation is also discussed.