• Journal of KIISE:Information Networking
• /
• v.32 no.4
• /
• pp.443-451
• /
• 2005

Stateful inspection devices must maintain flow information. These devices create the flow information also for network attack packets, and it can fatally inflate the dynamic memory allocation on stateful inspection devices under network attacks. The memory inflation leads to memory overflow and subsequent performance degradation. In this paper, we present a guideline to set the flow entry timeout for a stateful inspection device to remove harmful embryonic entries created by network attacks. Considering Transmission Control Protocol (TCP) if utilized by most of these attacks as well as legitimate traffic, we propose a parsimonious memory management guideline based on the design of the TCP and the analysis of real-life Internet traces. In particular, we demonstrate that for all practical purposes one should not reserve memory for an embryonic TCP connection with more than (R+T) seconds of inactivity where R=0, 3, 9 and $1\leqq{T}\leqq{2}$ depending on the load level.

• Polymer(Korea)
• /
• v.29 no.3
• /
• pp.294-299
• /
• 2005

Thermo-responsive poly(N-isopropylacrylamide) (PIPAAm) was covalently patterned by masked el electron beam irradiation. Introduction of PIPAAm on tissue culture polystyrene dish was confirmed by ATR-FTIR and ESCA measurements. Hepatocytes were cultured at $37^{circ}C$ on these surfaces. Cells adhered on PIPAAm-grafted domains were detached by reducing culture temperature to $20^{circ}C$. Endothelial cells were then seeded and cultured on the same surfaces. Seeded endothelial cells were selectively attached on hepatocytes detached and PIPAAm-grafted domains and could be co-cultured with hepatocytes on the same culture dishes with clear pattern. This co-culture method enabled long-term co-culture of hepatocytes with endothelial cells.

• The Journal of the Korea Contents Association
• /
• v.14 no.11
• /
• pp.864-870
• /
• 2014

To propose a basis for the selection of personal dosimeters to measure radiation dose administration of radiation workers as a way to evaluate the usefulness dosimeter. For the dosimetry of the radiation workers 2012, during 1 year, 30 were radiation workers to measure personal dose. By personal exposure is measured cumulative dose, is investigated the performance of the TLD, PLD, OSLD. And comparing the measured value of each dosimeter dose and analyzed. Medical institutions, inspection work and quarterly confirmed the cumulative exposure dose of radiation workers. Using DAP and Ion-Chamber, to measure to compare TLD, PLD, OSLD dosimeter performance. A comparison of the directly through the X-ray dosimeter and The absolute value of the Ion-Chamber, OSLD more similar than in the TLD and PLD showed the dose values so the excellent ability to measure the results. Also in radiation generating area dose of radiation workers is higher than that in OSLD. Consequently, in terms of the individual exposure management OSLD is appropriated and beneficial than others.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.107-111
• /
• 2007

There exists a many-to-many mapping relationship between persons and their names. A person may have multiple names, and different persons may share the same name. These synonymous and homonymous names may severely deteriorate the recall and precision of the person search, respectively. This study addresses the characteristics of features for resolving homonymous author names appearing in citation data. As disambiguation features, previous works have employed citation-internal features such as co-authorship, titles of articles, titles of publications as well as citation-external features such as emails, affiliations, Web evidences. To the best of our knowledge, however, there has been no literature to deal with the influences of features on author disambiguation. This study analyzes the effect of individual features on author resolution using a large-scale test set for Korean.

• Journal of Korea Multimedia Society
• /
• v.15 no.11
• /
• pp.1369-1376
• /
• 2012

In this paper, we propose 2D industrial image registration method for the detection of defects. Proposed method performs preprocessing to smooth the original image with the preservation of the edge for the robust registration against general noise. Then, x-direction gradient magnitude image and corresponding binary image are generated. Density analysis around neighborhood regions per pixel are performed to generate feature image for preventing mis-registration due to moire-like patterns, which frequently happen in industrial images. Finally, 2D image registration based on phase correlation between feature images is performed to calculate translational parameters to align two images rapidly and optimally. Experimental results showed that the registration accuracy of proposed method for the real industrial images was 100% and our method was about twenty times faster than the previous method. Our fast and accurate method could be used for the real industrial applications.

• Journal of the Korean Society for information Management
• /
• v.25 no.3
• /
• pp.27-39
• /
• 2008

In bibliographic data, the use of personal names to indicate authors makes it difficult to specify a particular author since there are numerous authors whose personal names are the same. Resolving same-name author instances into different individuals is called author resolution, which consists of two steps: calculating author similarities and then clustering same-name author instances into different person groups. Author similarities are computed from similarities of author-related bibliographic features such as coauthors, titles of papers, publication information, using supervised or unsupervised methods. Supervised approaches employ machine learning techniques to automatically learn the author similarity function from author-resolved training samples. So far however, a few machine learning methods have been investigated for author resolution. This paper provides a comparative evaluation of a variety of recent high-performing machine learning techniques on author disambiguation, and compares several methods of processing author disambiguation features such as coauthors and titles of papers.

• Journal of the Korean GEO-environmental Society
• /
• v.9 no.3
• /
• pp.51-60
• /
• 2008

Soil nailing systems are generally many used to the temporary structure in underground excavations and reinforcements of slopes in Korea. However, large-scaled experimental studies related to soil nailing systems are mostly studies related to performance monitoring and field pullout tests. Specially, there are no researches related in the large scaled load tests of soil nailed walls in Korea. In this study, a case study on the large scaled load tests of soil nailed walls is introduced and the behavior characteristic of them is investigated. Also, they are proposed allowable deformation corresponding to the serviceability limit of soil nailed walls and ultimate deformation corresponding to the collapse state of the walls. These results can be applied to the maintenance management of soil nailed walls. And analysis on the required minimum factor of safety of soil nailed walls using the relation curve of load ratio and deformation ratio are carried out.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.6
• /
• pp.861-868
• /
• 2022

A key use of applying building information modeling (BIM) to the construction stage of a project is to help identify construction obstacles and to visualize construction status according to the progress of the construction schedule. When employing 4D simulation for this purpose, start and finish dates for each activity and a 3D model of the activity must be prepared. In this work, in order to simplify the configuration of a 4D model, minimum attribute information of the BIM model produced in the design stage was used to construct a system that generated activity information in the construction stage using a clustering algorithm. Its usefulness as actual schedule management information was then analyzed.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5D
• /
• pp.627-634
• /
• 2009

The BTL (Build-Transfer-Lease) contract of construction project serves as a part for early establishment of industrial foundation for social overhead capital. However, project cost of BTL contract is focused on initial construction cost. Accordingly, operation cost is lowly evaluated because there is no standard criterion for estimating maintenance cost for the facility. The low operation cost can be a factor that reduces service quality of facility operation. This study suggests a resonable method for estimating cost and manpower in the operation phase by using the existing practical data for wastewater treatment plant by BTL contract. The results of the study can be used for evaluating rough operation cost and manpower of similar plant project by facility size.

• Korean Journal of Construction Engineering and Management
• /
• v.25 no.5
• /
• pp.3-14
• /
• 2024

Recently, both nationally and internationally, various BIM guidelines have been developed. These guidelines present fundamental principles and standards for the application of BIM. However, practical BIM guidelines for the schedule management area in the construction phase are lacking, making it difficult to apply them effectively in practical work settings. In this study, performance-based delivery guidelines are presented for the key functionalities of 4D CAD systems, which are representative BIM tools used in the construction phase. To achieve this, a survey analysis was conducted to determine the prioritization of these functionalities. Based on the characteristics of the project, delivery guidelines were formulated to allow users to selectively utilize the guidelines at different levels. Furthermore, practical ways to utilize performance-based delivery guidelines for schedule management using 4D CAD were proposed, validating the usability of these guidelines. The research findings suggest that these guidelines for BIM functionality in schedule management can hold practical significance as the utilization of BIM in construction phases continues to increase.