• 제목/요약/키워드: 강수재

검색결과 186건 처리시간 0.03초

SWMM을 활용한 침수예상지역 우수저류조의 적정크기결정에 관한 연구 (A Study on the Proper Size of Rainwater Stored Tank in Submerged Districts Using SWMM Program)

  • 장승재
    • 한국주거학회논문집
    • /
    • 제20권3호
    • /
    • pp.69-76
    • /
    • 2009
  • The Storm Water Management Model(SWMM) by EPA is a dynamic rainwater-runoff simulation model used for single event or long-term simulation of runoff quantity and quality from primarily urban areas. The SWMM simulation program is operated by the site area, the weather date, conduit plan etc. on reference region. The purpose of this study was to analyze flood area, the duration of flooded and surcharged on the reference region. Without rainwater stored tank, the area of flooded and surcharged on reference area is similar to the area of reference region. But, With rainwater stored tank, the area of flooded and surcharged on reference area is much reduced compared to without rainwater stored tank. According to SWMM simulation results, the rainwater stored tank is located closer to site is more effective for reduction of duration of flooded and surcharged and flow rate.

포스트텐션 전이슬래브의 구조해석 및 설계방법 (Structural Analysis and Design of Post-Tension Transfer Slab)

  • 윤장근;강수민;김욱종;이도범;추문석
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
    • /
    • pp.19-20
    • /
    • 2010
  • 본 연구는 전이슬래브의 두께를 줄이고 철근량을 감소시키기 위해 포스트텐션을 전이슬래브에 적용하는 포스트텐션 전이슬래브에 관한 연구이다. 본 논문에서는 전이슬래브와 같이 두꺼운 판요소 해석에 적합한 Wood-Armer 공식과 부착 긴장재를 사용한 포스트텐션 설계방법을 제안하고자 한다.

  • PDF

고강도 강섬유보강콘크리트 보의 전단거동 (Shear Behavior of High-Strength Concrete Beams with Steel Fiber)

  • 갈경완;황진하;이득행;주현진;김강수;조해창
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
    • /
    • pp.65-66
    • /
    • 2010
  • 이 연구에서는 고강도 콘크리트에 강섬유를 혼입했을 경우 강섬유의 전단 보강재로서 효율성을 파악하기 위해 강섬유 혼입률이 0.5%-1.0%인 3개의 강섬유보강 고강도 콘크리트 보와 1개의 고강도 콘크리트 보를 제작하여 전단파괴를 유도한 실험을 수행하였다. 실험결과 강섬유 혼입에 의해 고강도 콘크리트 보의 전단강도가 크게 증가 되었으며 연성적으로 거동하는 것을 알 수 있었다.

  • PDF

외란 관측기를 이용한 견실한 차량 안정성 제어 (Robust Vehicle Stability Control Using Disturbance Observer)

  • 한진오;이경수;강수준;이교일
    • 대한기계학회논문집A
    • /
    • 제26권12호
    • /
    • pp.2519-2526
    • /
    • 2002
  • A disturbance observer-based vehicle stability controller is proposed in this paper. The lumped disturbance to the vehicle yaw rate dynamics caused by the uncertain factors such as uncertain tire forces and parameters is estimated by the disturbance observer, which is utilized by the robust controller to stabilize the lateral dynamics of the vehicle. The dynamics of the hydraulic actuator is incorporated in the vehicle stability controller design using the model reduction technique. Modular control design methodology is adopted to effectively deal with the mismatched uncertainty. Simulation results indicate that the proposed disturbance observer-based vehicle stability controller can achieve the desired reference tracking performance as well as sufficient level of robustness.

Evaluation of Flow and Transport Model in Integrated Surface and Subsurface Systems

  • 김성균;박영진;배광옥;이강근
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2005년도 총회 및 춘계학술발표회
    • /
    • pp.324-327
    • /
    • 2005
  • 지하수와 지표수를 연계하여 flow와 transport를 모의하는 프로그램인 HydroSphere를 Canada Ontario주의 Canadian Forces Base Borden에서의 실험 (Abdul ,1985) 자료를 이용하여 평가해 보았고, 유성지역 소유역에서의 강수, 지표수, 지하수의 수소동위원소 모니터링 (박준형, 고용권, 박경우, 정형재, 김교원, 2003) 자료를 이용하여 평가해 볼 예정이다.

  • PDF

광물질 혼화재를 사용한 초고강도 SFRCC의 특성 (The propertise of the compressive strength of ultra-high strength Steel Fiber Reinforced Cementitious Composites with mineral admixtures)

  • 박정준;고경택;강수태;류금성;김성욱
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
    • /
    • pp.473-476
    • /
    • 2005
  • Silica fume has merits of filling the voids, enhancement of reheological chracteristics, prduction of secondary hydrates by pozzolanic reaction in reactive powder concretes. However silica fume has been imported in high-cost in domestic industry, we need to investigate replaceable material in stead of silica fume in a view of economy Therefore, in this paper, in order to investigation replacement of silica fume in ultra-high strength SFRCC we used another mineral admixtures like that fly-ash, blast slag.

  • PDF

철근콘크리트 연속보에서의 모멘트 재분배에 대한 실험적 검증 (An Experimental Verification on the Redistribution of Moment in Continuous Reinforced Concrete Members)

  • 김상식;윤형재;이승배;장수연;김강수
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2006년도 추계 학술발표회 논문집
    • /
    • pp.57-60
    • /
    • 2006
  • In reinforced concrete structures, moment redistribution which can be caused as a result of plastic behavior of reinforcing bars in continuous beams and slabs, are recognized as favorable phenomenon, for it elevates the flexibility and efficiency in member and reinforcement design. To obtain detailed information of the concrete-reinforcement bonding effect on the moment redistribution of continuous beams, tests have been planned and carried out for six specimens, the positions and extents of the bonding area being taken as experimental parameters.

  • PDF

memcached의 slab chunk 크기 조정을 통한 효율적인 메모리 사용 (Effectively Using Memory throughout Adjustment for Slab Chunk Size of Memcached)

  • 손주형;이민재;김태일;강수용
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2012년도 추계학술발표대회
    • /
    • pp.1399-1401
    • /
    • 2012
  • memcached는 기존 RDBMS의 한계를 극복하기 위해 나온 소프트웨어 중 하나이다. memcached는 여러 장점들이 있어 많은 곳에서 활용되지만 주의할 점이 있어 사용 시 몇 가지 요소들을 적절히 설정하여 사용해야 한다. memcached는 기존메모리 할당방식 대신 slab allocater를 통해 메모리를 관리하여 입력되는 데이터의 크기에 맞춰 slab class의 chunk에 저장된다. 입력되는 데이터의 크기에 따라 저장된다는 memcached의 특성 때문에 slab chunk 크기를 조정하는 요소를 상황에 맞게 정해준다면 보다 효율적인 메모리 사용을 할 수 있다는 것을 실험을 통해 검증해보았고, 이 실험을 통해 나온 결과는 memcached를 사용하는 많은 분야에서 응용될 수 있을 것이다.

PCB 부품 검출을 위한 Knowledge Distillation 기반 Continual Learning (Knowledge Distillation Based Continual Learning for PCB Part Detection)

  • 강수명;정대원;이준재
    • 한국멀티미디어학회논문지
    • /
    • 제24권7호
    • /
    • pp.868-879
    • /
    • 2021
  • PCB (Printed Circuit Board) inspection using a deep learning model requires a large amount of data and storage. When the amount of stored data increases, problems such as learning time and insufficient storage space occur. In this study, the existing object detection model is changed to a continual learning model to enable the recognition and classification of PCB components that are constantly increasing. By changing the structure of the object detection model to a knowledge distillation model, we propose a method that allows knowledge distillation of information on existing classified parts while simultaneously learning information on new components. In classification scenario, the transfer learning model result is 75.9%, and the continual learning model proposed in this study shows 90.7%.