• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.2
• /
• pp.9-19
• /
• 2002

Steel piers and concrete-filled steel(CFS) piers, in spite of reasonable strength, high ductility, small section, and fast construction, have not been considered as one of alternatives to RC piers even in the highly populated urban area where aseismic safety, limited space and fast construction are indispensably required. This paper, the first of two companion papers for the seismic performance of steel and CFS piers, tests steel and CFS piers under quasi-static cyclic loading to estimate their ductility and strength. Additional details such as rebars and base ribs are added to increase the ductility of a concrete-filled steel pier with minimum additional cost. Also, simplified numerical analyses using nonlinear spring and shell elements are examined for the estimation of the ductility and strength of concrete-filled steel piers and a steel pier. The result shows that concrete-filled steel peirs have higher energy absorption, i.e., ductility and strength than those of steel pier and increasing bonding between in-filled concrete and lower diaphragm, and the improved details of stress concentrated region would be important for the ductility and strength of a pier. Numerical results show that simplified modeling with nonlinear springs and shells has potential to be effective modeling technique to estimate the seismic performance of a concrete-filled steel pier.

• The Journal of the Acoustical Society of Korea
• /
• v.9 no.6
• /
• pp.22-28
• /
• 1990

최근에 음성합성 기술이 발전됨에 따라 이러한 기술을 이용한 새로운 통신 서비스가 등장하고 있으며 그 표준 설정에 있어서 음성 품질은 아주 중요한 요인이 된다. 따라서, 시스템 알고리즘의 진단 적 평가 및 평가치의 상호 비교를 위해 품질 평가방법을 개발하는 것은 매우 중요하다. 본 논문에서는 규칙 합성음성의 이해성 평가를 위한 기본적 사항들과 개념을 기술하고 ,이해성 평가에 사용되는 단어 표를 구성하는 방법과 단어표를 제안하였다.

• Journal of Korean Association for Spatial Structures
• /
• v.5 no.3 s.17
• /
• pp.123-130
• /
• 2005

This study presents an effective stiffness-based optimal technique to control quantitatively lateral drift and evaluate the structural behavior characteristics and efficiency for tall outrigger system subject to lateral loads. To this end, displacement sensitivity depending on behavior characteristics of outrigger system is established and approximation concept that preserves the generality of the mathematical programming and can efficiently solve large scale problems is introduced. Specifically, under the 'constant-shape' assumption, resizing technique of member is developed. Four types of 50 story frameworks are presented to illustrate the features of the quantitative lateral drift control technique proposed in this study.

• 발명특허
• /
• v.31 no.10 s.364
• /
• pp.38-41
• /
• 2006

모든 가정과 심지어 회사, 공장 등 어느 곳에서든 하수관은 꼭 필요하다. 이런 다양한 환경에서 발생하는 하수를 옮겨 주는 것이 바로 하수관이기 때문이다. 이처럼 꼭 필요한 하수관은 일반적으로 PE(Polyethylene Solid Sewer Pipe) 하수관이 사용되고 있다. 수요가 많기는 하지만 기존 PE 하수관이 뛰어난 성능을 가지고 있는 것은 아니다. 강성이부족하고 내면이 매끄럽지 않아 오폐물이 침전되어 오폐수의 수통이 원활하지 못하고 이로 인하여 하수관 유지 및 보수에 많은 비용이 발생하였던 것이 사실이다. 또, 강성이 부족하기 때문에 많은 부분에서 사용의 제약이 뒤따랐다. 도로 밑에서의 PE 하수관 설치를 제한하였던 것이 바로 이런 이유 때문이다.

• Journal of KSNVE
• /
• v.6 no.3
• /
• pp.274-285
• /
• 1996

본 글에서는 대형차량의 엔진 마운트 과정과 마운트 설계시 필요한 사항들에 대하여 간략히 정리해 보았다. 먼저 2장에서는 비교적 형상이 간단한 대형 차량의 마운트 강성을 정확히 설계하는 과정을 제시하였는데, 이 방법에 따라 아운트 재질에 대한 탄성계수를 데이터 베이스화 함으로써 다양한 경우에 원하는 특성을 갖는 마운트를 쉽게 설계할 수 있음을 보였다. 3장에서는 마운팅 설계를 위한 기초 데이터 -관성특성 및 가진력 등에 대하여 기술하였으며, 4장에서는 마운트 최적 설계과정을 정리하였다. 여기서 마운트의 강성을 선정하는 방법과 프레임의 유연성이 엔진 동특성에 미치는 영향을 고찰 최적화하는 과정을 기술하였다. 또한 시혐적 검토에 의한 평가방법을 5장에서 서술함으로 일반적인 엔진 마운트에서의 최적 설계에 대한 내용을 서술하였다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.2
• /
• pp.110-119
• /
• 2000

In this study, we considered the method evaluation the flexibility of joint area including member with circular section. We regarded the flexibility of joint area as translational and rotational springs for the purpose of expressing local deformation. We verified this method by the use of normal mode analysis. We also calculated this joint area occurring in penetration so as to apply this method to other cases. Compare with the shell element model. we can the considerably approximate values.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.1 no.2
• /
• pp.51-58
• /
• 2010

This work examines the identification of stiffness reduction in damaged reinforced concrete bridges under moving loads, and carries out the performance assessment after repairing using advanced composite materials. In particular, the change of stiffness in each element before and after repairing, based on the Microgenetic algorithm as an advanced inverse analysis, is described and discussed by using a modified bivariate Gaussian distribution function. The proposed method in the study is more feasible than the conventional element-based method from computation efficiency point of view. The validity of the technique is numerically verified using a set of dynamic data obtained from a simulation of the actual bridge modeled with a three-dimensional solid element. The numerical examples show that the proposed technique is a feasible and practical method which can inspect the complex distribution of deteriorated stiffness although there is a difference between actual bridge and numerical model as well as uncertain noise occurred in the measured data.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.1
• /
• pp.68-75
• /
• 2016

The present study evaluated the mechanical properties of open graded asphalt for semi-rigid pavements in order to determine the mixing proportion experimentally. A total twelve types of basic mixing proportions were set up and mechanical tests such as marshall stability, porosity, permeability, and cantabro loss were conducted based on Korean standards. From the tests results, it was found that the marshall stability in case of straight and modified asphalt increase up to the contents with 5.0% and 5.5% respectively. The porosity and permeability of asphalt tended to decrease as the asphalt contents increase, the coefficient of correlation between both were estimated 86%. The increase contents with asphalt range from 3.5% to 6.0% tended to decrease the cantabro loss and the modified asphalt enhanced the resistance of cantabro loss with range from 18.8% to 33.1% than straight asphalt under same asphalt contents. In comparison with test results and quality standards, it was concluded that the modified asphalt content of 4.5% is effective to adopt for open graded asphalt.

• Journal of Korean Society of Steel Construction
• /
• v.22 no.4
• /
• pp.293-303
• /
• 2010

The purpose of this study was to evaluate the influence of the methods of application of the direct analysis method, using the load amplification factor suggested by the KBC 2009 design code, for the evaluation of frame stability. For this purpose, the direct analysis method was performed for three-story-one-bay and five-story-three-bay unbraced steel frames with various notional loads, bending stiffness reductions, and factor B2s. The results of the analyses were compared with the results of the second-order inelastic analysis to evaluate the influence of the applied methods. The scale of the frame, the axial load ratio, and the axial load distribution pattern were added to the main parameters to investigate the external effects. The research results showed that the influence of the methods of application of the direct analysis method is not significant in the case of the required axial strength and the application of the additional notional loads; and that the application of the factor B2 with the story stiffness concept to the direct analysis method is appropriate for the required flexural strength.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.1
• /
• pp.13-22
• /
• 2018

In this study, seismic performance of existing RC frames reinforced with steel chevron bracing systems was experimentally evaluated. For this purpose, the unreinforced base specimen and seismically reinforced specimens with steel chevron bracing systems were fabricated and tested. Both strength and stiffness of the reinforced specimens were targeted about 2-3 times larger than the base specimen. Test results showed that the stiffness, strength, and ductility of the reinforced specimens considerably improved than those of unreinforced base specimen. Therefore, the results from this study could offer the basic information on the developing design guideline for the seismic reinforcement of RC frames.