• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.51 no.5
• /
• pp.499-509
• /
• 2018

This study optimized the bone-softening and fishy odor-reducing process for mackerel Scomber japonicus products using response surface methodology (RSM). The RSM showed that the optimum concentrations of doenjang and citric acid for reducing the fishy odor in bone-softened mackerel were 11.8% and 0.04%, respectively, and the optimum immersion time was 52.2 min. The estimated overall acceptance, salinity, and acidity of the products under these optimum conditions were 7.7 points, 1.1%, and 202.6 mg/100 g, respectively, which were similar to the actual measured values of $7.6{\pm}1.2$ points, $1.0{\pm}0.1%$ and $203.2{\pm}3.8mg/100g$. Moreover, the heating temperature and time for bone-softening based on RSM were $107.3^{\circ}C$ and 4.4 h, respectively. The estimated hardness and proportion of skin removed from the product under the optimal conditions were $161.5g/cm^2$ and 0.09%, respectively, which were also similar to the actual measured values of $171.1{\pm}12.6g/cm^2$ and $0.10{\pm}0.02%$. The optimum bone-softening and fishy odor-reducing process for mackerel consisted of the following steps: thawing (${\leq}10^{\circ}C$, 8 h), filleting, washing/dewatering, immersing in an 11.8% doenjang -0.04% citric acid solution for 52 min, washing/dewatering, heating ($107.3^{\circ}C$, 4.4 h), freezing, depanning, internal and external packaging, and X-ray detection treatment.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.6
• /
• pp.21-30
• /
• 2011

In the global IT market, a lot of issues for responding to various environmental regulations emerged. In case of the data centers, it is consuming huge amounts of energy to maintain. So there have been various technical attempts as Consolidation, Virtualization, Optimization to efficiently manage energy and data storage to fix the problems. In this paper, we propose a new RAID(Redundant Array of Independent Disks) mechanism which is differing the intensity of power consumption and works to provide data protection and disaster recovery(backup, mirroring etc.) to stratify multiple volumes. G-RAID minimize the power consumption and the lower of I/O performance by selecting the volume depending on the frequency of data access while classifying the power consumption between volumes in storage system. Also, it is possible that a filesystem and block map information of G-RAID is processed by basic unit which is group located in a row for the blocks to work efficiently and can minimize the performance degradation of block mapping load by the access frequency in each groups. As a result, we obtained to elevate a little bit of response time caused by block relocation work, but showed the decrease of power consumption by 38%.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.2
• /
• pp.79-85
• /
• 2018

A two-way pump can reduce costs by draining and circulating water out and into the drum of the washing machine using a single motor whereas a conventional one-way pump uses two motors for doing the same function. However, when the water is drained through the drainage outlet in the two-way pump casing, a backward or inhalation flow occurs and the water flows to the circulation outlet. Likewise, when the water is circulated, the backward flow or inhalation makes the water flow to the drainage outlet. In this study, design optimization of the two-way pump casing is performed to maximize its performance while improving backward flow and inhalation occurring inside of the pump casing. For this, design variables of the pump casing that mainly affect the performance of the pump such as flow rate and torque of the motor were selected through the analysis of mean. Using response surface models for the performances, the ratio of the flow rate to the torque was maximized with satisfying the constraints for the back flow and inhalation through design optimization.

• Journal of Digital Contents Society
• /
• v.17 no.5
• /
• pp.317-327
• /
• 2016

Flipped learning is a new learning technique which can maximize the learning effect by mixing two or more different learning environments including online & offline, and recently introduced system: 'Google classroom' is the optimized internet platform for flipped learning. This study tried to apply flipped learning to regular course 2nd grade dental students(n=70) and evaluated the satisfaction of students. The subjects of periodontology and operative dentistry were chosen to evaluate flipped learning model for regular course 2nd grade dental students(n=70). Each class consisted of six classes, and three times of them were performed in conventional classes and the other three times were in flipped learning method by using Google classroom. Evaluation of satisfaction progressed at the end of class. In this study, application of flipped learning in the dental college classes showed high efficiency in terms of degree of understanding, self-directed learning and motivation. Collectively, it was shown that flipped learning using Google classroom can be a reliable platform in dental classes.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.11
• /
• pp.1693-1699
• /
• 2015

Overall quality of six kinds of commercial broiler breast fillets (A~F) retailed in Korea were examined, including proximate composition analysis, shape profile analysis, pH, color, tenderness, cooking loss, descriptive analysis, and consumer testing. A total of 120 breast meat fillets were purchased at a local market. Overall quality of broiler breast meat commercially available in Korea was found to vary significantly, indicating a broad range of product quality in the marketplace. Moisture content of meat ranged from 74.4 to 76.4%, whereas protein, fat, and ash contents were 21.8~25.2, 0.2~0.8, and 1.07~1.16%, respectively. The pH ranged from 6.2 to 6.4, whereas color values ($L^*$, $a^*$, and $b^*$) were 52.2~57.2, -3.5~0.5, and 8.3~13.6, respectively, among all products tested. Approximately 9% variation in cooking loss was detected depending on the products evaluated, whereas shapes (height, width, and length) of meat were also significantly different (15% variation on average). Product F was proven to be the least tender and least liked by consumers, implying that tenderness is a key attribute determining consumer acceptability of broiler breast meat.

• Journal of Adhesion and Interface
• /
• v.15 no.3
• /
• pp.100-108
• /
• 2014

In this work, a series of molar ratios composed with YD-128 and DDM were chosen based on the viscosity analysis. The mixtures of YD-128 and DDM with the different molar ratios were cured at $170^{\circ}C$ for 15 min followed by post cure at $190^{\circ}C$ for two hours. The thermal properties of the cured samples were investigated with DSC, TGA, DMA, and TMA. The conversion ratio of the mixtures of YD-128 and DDM (1 : 1.1) was calculated by dividing ${\Delta}H$ obtained from DSC experiments for each cured sample by ${\Delta}H$. The TGA data of the cured samples showed that the thermal stability and thermal degradation activation energy were proportional to the amount of DDM in the mixtures. However, the highest tan ${\delta}$, and the lowest thermal expansion data with DMA and TMA respectively were obtained from the stoichiometric mixture of YD-128 and DDM. Furthermore, the different ratio of mixtures were applied to test specimens to be cured at $170^{\circ}C$ to measure single lap shear strength with universal testing machine.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.3
• /
• pp.269-275
• /
• 2020

In this study, flexural tests of precast concrete panels according to the thickness of cross-sectional and the with or not of reinforcement were carried out in order to develop and assess of a lightweight precast concrete panel using ultra high performance concrete. For the test, four panels were fabricated, and consisted of one normal concrete panel and three ultra high performance concrete panels. As a test result, it was found that the plain precast panel using ultra high performance concrete had a lower flexural performance than the reinforced normal concrete panel, regardless of the cross-sectional size. The flexural performance of the hollow-sectional precast panel applying ultra high performance concrete, is improved by 150% compared to that of the reinforced normal concrete panel. That is, through additional performance verification and optimization of the cross-sectional design of the panel, the ultra high performance concrete precast panel can be made lighter. Also, the practical use of lightweight precast panels with ultra high performance concrete can be available through evaluation on shear, joint connection and anchoring, etc.

• Journal of the Korean Chemical Society
• /
• v.53 no.6
• /
• pp.640-652
• /
• 2009

We have performed mPW1PW91 calculations to investigate the conformational characteristics and hydrogen bonds of p-tert-butylcalix[4]arene (1), p-tert-butylcalix[5]arene (2), calix[6]arene (3) and p-tertbutylcalix[6]arene (4). The structures of the different conformers of 1-3 were optimized by using mPW1PW91/6-31+G(d,p) method. The relative stability of the four conformers of 1 is in the following order: cone (most stable) > partial-cone > 1,2-alternate > 1,3-alternate. The relative stability of the conformers of 2 is in the following order: cone (most stable) > 1,2-alternate > partial-cone > 1,3-alternate. The relative stability of the various conformers of 3 is in the following order: cone (pinched: most stable) > partial-cone > cone (winged) - 1,2-alternate - 1,2,3-alternate > 1,4-alternate > 1,3-alternate > 1,3,5-alternate. The structures of the various conformers of 4 were optimized by using the mPW1PW91/6-31G(d,p) method followed by single point calculation of mPW1PW91/6-31+G(d,p). The relative stability of the conformers of 4 is in the following order: cone (pinched) > 1,2-alternate > cone (winged) > 1,4-alternate - partial-cone > 1,2,3-alternate > 1,3,5-alternate > 1,3-alternate. The primary factor affecting the relative stabilities of the various conformers of the 1-4 are the number and strength of the intramolecular hydrogen bonds. The hydrogen-bond distances are discussed based on two different calculation methods (B3LYP and mPW1PW91).

• Journal of Bio-Environment Control
• /
• v.24 no.2
• /
• pp.106-112
• /
• 2015

The objective of this study was to examine the growth reaction of strawberry plants to the mixed red and blue LED sources and their installation method. The artificial light sources were : LED PAR(PPFD $2{\sim}4{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$), LED BAR(PPFD $100{\sim}120{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$) and incandescent(PPFD $2{\sim}4{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$) lamp. The lighting treatment was started at the first cluster flowering period as a night breaking lighting and was applied during 3 hours, between 22:00 and 01:00 every day. Plant height and leafstalk length were longer in plants treated with incandescent lamp, where as fresh and dry weight of shoot were heavier in LED PAR compared to incandescent lamp treatment. LED PAR treatment also resulted in the largest leaf area, chlorophyll content was increased by $0.36mg{\cdot}g^{-1}$ after 60 days from the starting of the artificial lighting. According to the experimental results application of 16W LED PAR lamps and W-type installation method can improve light environment in strawberry lighting culture.

• Composites Research
• /
• v.33 no.2
• /
• pp.39-43
• /
• 2020

Recently, fabrication process of thermoplastic polyamide-based composites with recyclability as well as impact, chemical, and abrasion resistance have been widely studied. In particular, thermoplastic reactive resin transfer molding (TRTM) in which monomer with low viscosity is injected and in-situ polymerized inside mold has received a great attention, because thermoplastic melts are hard to impregnate fiber preform due to their very high viscosity. However, it is difficult to optimize the processing conditions because of high reactivity and sensitivity to external environments of the used monomer, ε-caprolactam. In this study, viscosity as an important process parameter in TRTM was measured during in-situ anionic polymerization of ε-caprolactam and the solutions for problems caused by high polymerization rate and sensitivity to moisture and oxygen were suggested. Reliability of the improved measurement technique was verified by comparing the viscosity behavior at various environmental conditions including humidity and atmosphere, and it is expected to be helpful for optimization of TRTM process.