• Journal of the Korea Concrete Institute
• /
• v.15 no.1
• /
• pp.43-51
• /
• 2003

Recently, to consider financial and constructive aspect usage of Admixture such as Blast-Furnace Slag and Fly-Ash, are increased. Also the use of cold-weather-concrete is increased. Blast-Furnace Slag, a by-product of steel industry, have many advantage to reduce the heat of hydration, increase in ultimate strength and etc. But it also reduces early-age strength, so it is prevented from using of Blast-Furnace Slag at cold-weather-concrete. In this study, for the purpose of increasing usage of Blast-Furnace Slag at cold-weather-concrete, it is investigated the strength properties of concrete subjected to frost damage for the cause of early age curing. The factors of this experience to give early frost damaged were Freezing temperature(-1, -10, $-15^{\circ}C$), Early curing age(0, 12, 24, 48hour), Freezing times(0, 12, 24, 48hour). According to this study, if early curing is carried out before haying frost damage, the strength of concrete used admixture, subjected to frost damage, is recovered. And that properties are considered, the effect of using admixture like blast-furnace-slag, is very high

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.275-283
• /
• 2016

In this study, three knee-orthoses (dial lock type, medium size, right side) were used for a quality level test (static bending test and solidity test of the locking system) of the knee-orthosis locking system. In the static bending test, a smaller maximum load was observed in samples A and C compared to the reference standard value (KS P 8408 standard value: 1000 N, sample A: 865 N, sample C: 833 N). In addition, in the solidity test of the locking system, a smaller maximum load was observed in the all samples compared to the referenced standard value (KS P 8411 standard value: 200 N, sample A: 41 N, sample B: 97 N, sample C: 54 N). Korean industrial standards for knee-orthoses and systematic test methods are lacking. Therefore, a systematic management plan for knee-orthoses is required. The result of the current study showed that a systematic management plan for the knee-orthosis locking system is required. In particular, the development of a quantitative and objective test method is needed. The findings of the current study may be useful for monitoring the quality of the knee-orthosis locking system and may provide foundational information for the development of a quantitative and objective test method.

• Korean Journal of Cleft Lip And Palate
• /
• v.5 no.2
• /
• pp.95-108
• /
• 2002

언어 발달의 조기 단계를 이해하기 위한 일환으로 crying은 언어전 발달의 기초 단계로서 여러 학문적 분야에서 많은 연구가 있어왔다. 그러나 구순구개열(CLP))환아의 경우는cry-producing/control mechnism에 variation이 많은 이유로 이 분야의 연구는 거의 없는 실정이다. 이에 본 연구에서는 다음과 같은 의문점을 가지고 CLP환아의 cry feature에 대한분석을 하였다. 첫째, 정상아와 CLP환아의 cry에 전형적인 차이가 있는가? 둘째, CLP환아의 술전, 술후 cry feature에 변화가 있는가? 셋째, cry분석이 CLP환아의 이후 speech disorder에 대한 언어전 평가로서의 가치가 있는가? 넷째, 특정 parameter가 언어전 평가에 적절한 도구로 작용할 수 있는가? 생후 15개월 이내의 CLP 환아 3명과 유사한 나이대의 정상아 8명의 cry에 대한 공기역학 및 음향음성학적 분석을 통해 CLP 환아와 정상아, CLP환아의 술전, 술후 cry특성을 비교 분석하였다. 결과는 다음과 같다. 1 공기역학적 분석 1) airflow는 CLP 환아의 경우 정상아보다 약간 높았고 술 후 약간 증가하였다. 2)폐활량을 나타내는volume에서는 정상아보다 술전 CLP환자의 경우 보상적으로 더 큰 수치를 보였고 술후 약간 증가하였다. 3)강도를 나타내는 parameter(SPL)에서는 정상아 보다 술전 CLP환자의 계측치가 약간 작았으나 술 후 증가하는 양상을 보였다. 2. 음향음성학적 분석 1)기저 주파수 분석시 정상아에 비해 술 전 CLP환자의 경우 계측치가 약간 낮았으나 술 후 증가하여 정상군의 계측치에 근접하였다. 2)강도를 나타내는energy 측정시 정상아에 비해 술 전 CLP계측치가 보상성으로 약간 큰수치를 나타내었고 술 후 약간 더 증가하였다. 3) Shimmer에서는CUI환자의 술후계측치가술전에 비해 현저히 감소하여 정상군의 수치에 근접하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.12
• /
• pp.6284-6289
• /
• 2013

With the application of k-space trajectory in a different manner and analyzing the influence of noise and its direction, this study was conducted to obtain high-quality images with minimal influence of noise during an MRI examination for cerebrovascular disease, which has a low signal for imaging. To evaluate influence of the noise of different k-space trajectories, a linear Cartesian coordination trajectory and non-Cartesian coordination trajectory were applied to 38 people who had received a high-resolution MRI examination for the early detection of cerebrovascular disease. As a result, the non-Cartesian coordination trajectory showed a 43.32% lower signal of lumens in the internal carotid artery than a linear Cartesian coordination trajectory, and the noise level was also 50.19% lower in a non-Cartesian coordination trajectory. This result shows that noise occurs less in a non-Cartesian coordination trajectory than a linear Cartesian coordination trajectory, and a non-Cartesian coordination trajectory is more effective in low-signal and low-resolution MRI examination. Therefore, when performing high-resolution MRI examination with a low-signal cerebrovascular system, the use of non-Cartesian coordination k-space trajectory will minimize the influence of noise and provide good images.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.3
• /
• pp.41-47
• /
• 2009

Post-tensioned concrete pavement(PTCP) was developed to built long-span concrete pavement(120 m span) and to maintain long-term service life(over 40 years) of concrete pavement. In the present study, research for high-durable concrete was conducted to utilize the advantage of PTCP construction method efficiently. First of all, 20% of fly ash(by binder weight) was replaced to control alkali silica reaction. Second, silica fume was applied to improve the water-permeability and early-age strength. Results of tests for mechanical properties, water-permeability resistance, and surface-scaling resistance of ternary blended cement concrete showed that the early-age strength was improved significantly with addition of silica fume. The water-permeability resistance was improved from "Low" to "Very Low"(ASTM C 1202). However, surface-scaling resistance was decreased with an increase of silica fume, therefore, content of silica fume should be kept in less than 5%(by binder weight) to assure field application considering durability. The results of air-void analysis showed that durability factors were improved since spacing factors were estimated as 250$\pm$15 micron in adjusted mixtures.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.5
• /
• pp.53-64
• /
• 2009

Many slope failures are induced by rainfall infiltration. A lot of recent researches are therefore focused on rainfall-induced slope instability and the rainfall infiltration is recognized as the important triggering factor. The rainfall infiltrates into the soil slope and makes the matric suction lost in the slope and even the positive pore water pressure develops near the surface of the slope. They decrease the resisting shear strength. In Korea, a few public institutions suggested conservative slope design guidelines that assume a fully saturated soil condition. However, this assumption is irrelevant and sometimes soil properties are misused in the slope design method to fulfill the requirement. In this study, a more relevant slope stability evaluation method is suggested to take into account the real rainfall infiltration phenomenon. Unsaturated soil properties such as shear strength, soil-water characteristic curve and permeability for Korean weathered soils were obtained by laboratory tests and also estimated by artificial neural network models. For real-time assessment of slope instability, failure warning criteria of slope based on deterministic and probabilistic analyses were introduced to complement uncertainties of field measurement data. The slope stability evaluation technique can be combined with field measurement data of important factors, such as matric suction and water content, to develop an early warning system for probably unstable slopes due to the rainfall.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.2
• /
• pp.212-218
• /
• 2020

The purpose of this study is to investigate the fire resistance of ultra-high-performance concrete according to the amount of polypropylene fiber. Different mixtures according to the amount of polypropylene fiber were exposed to a maximum temperature of 900℃; and explosive spalling, residual compressive strength, and ultrasonic velocity of each specimen were evaluated. Test results showed that the fire resistance can be improved by including a small amount of polypropylene fiber in ultra-high performance concrete. It was not observed that explosive spalling occur at a temperature of 900℃ when the polypropylene fibers over 0.4% were included. Residual compressive strength and ultrasonic velocity decreased by 48% and 44%, respectively, compared to those at room temperature.

• Journal of the Korea Concrete Institute
• /
• v.25 no.4
• /
• pp.447-455
• /
• 2013

In this study, reinforced concrete slabs with steps were experimentally studied to analyze their structural performance and to suggest reinforcing details in the step. Because the stepped slabs may behave very poorly in terms of bending strength, stiffness, deflection, cracking, etc., the study is aimed to suggest proper reinforcing details such that the same bending strength is obtained as that without steps. The bending strengths of 12 test specimens with a variety of different reinforcing detail types or other parameters were compared with each other. The specimen without any additional reinforcement in the step had a very low bending strength and significant damage, and the specimens with diagonal reinforcements in the step showed substantial early cracks, experienced hinging of the step, and had a substantial loss of the bending strength. In contrast, the specimens with a combination of U-bars, reversed U-bars, L-bars, and reversed L-bars performed very well and almost reached to 100% of the slab bending strength. The U-bars and reversed U-bars were effective in controling the diagonal cracks, while the L-bars and reversed L-bars were effective in preventing from yielding of slab reinforcement near the step.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.2
• /
• pp.62-70
• /
• 2013

The purpose of this study is the displacement and velocity dependence evaluation of clamped shape metallic damper, which were evaluated superior in energy dissipation capacity than straight type slit damper. For this purpose, 6 metallic damper specimens are prepared and dependence test are performed. Test variables are displacement dependence and velocity dependence. According to displacement dependence test results, larger target displacement (50mm) shows lower cyclic numbers and cumulated energy dissipated area than lower target displacement (25mm). Also it shows higher strength and early failure than short target displacement. In velocity dependence evaluation, fast target velocity (60mm/sec) shows lower cyclic numbers and cumulated energy dissipated area than slow target velocity (40mm/sec). Therefore the hysteresis dependence of metallic damper were evaluated as close relation to the loading displacement and velocity conditions.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.100-100
• /
• 2011

아라미드 섬유는 고강도, 고내열성 등의 성능이 매우 우수하여 생산량이 제일 많은 수퍼 섬유이면서도 강직한 분자구조와 고결정성의 치밀한 구조 때문에 염색이나 기능성 가공이 어려워 의류 인테리어용, 타 산업으로의 다양한 전개가 어려운 실정이다. 최근에 사용이 급증되고 있는 아라미드 섬유를 상업적으로 염색 및 가공을 할 수 있는 공정 프로세스를 개발하여 표면 개질, 견뢰도의 향상 및 기능성 가공, 아라미드 및 관련 타 소재와의 교직을 통하여 기존제품의 성능개선 등의 기술 확보를 통해 선진국 및 대만 중국 등의 경쟁국 위주로 전개되고 있는 아라미드 염색가공기술을 조기에 확보하여 선진기술에 대응하여 우리나라의 섬유산업 인프라를 활용한 다양한 용도전개를 위해서 본 기술이 시급히 전개되어야 한다. 이에 본 연구에서는 환경친화적 건식처리 공정인 플라즈마 처리를 통해 아라미드 섬유의 표면개질 효과를 알아보았다. 플라즈마 처리에 의한 아라미드 섬유의 모폴로지 변화는 주사전자현미경(FE-SEM)으로 확인하였으며, 표면 개질 효과는 적외선분광기(FT-IR)과 접촉각 측정기로 평가하였다. 플라즈마 처리 가스나 출력이 증가함에 따라 아라미드 섬유 표면의 경시변화를 확인하였으며, 젖음성이 향상되는 것을 확인하였다.