• Korean Journal of Agricultural and Forest Meteorology
• /
• v.19 no.2
• /
• pp.43-53
• /
• 2017

This study aims to analyze the effect of typhoons on pear production. Pears are typical fruits that are vulnerable to typhoon damages, so typhoons are negatively associated with pear productivity. However, relatively less pear damages by typhoons in the main pear production area, comparing to the average in Korea, have been reported. The main production area seems to adopt better agricultural techniques or practices to cope with natural disasters such as typhoons. Thus, this study tests the hypothesis that there are differences of production losses due to typhoons between the main pear production area and the rest using the stochastic frontier analysis. The main production area is defined by Location Quotient Index (LQI), and we found that LQI had a significant effect to decrease the productivity losses in the main production areas, which shows that those production areas alleviated the pear production loss due to typhoons.

• Journal of Hospice and Palliative Care
• /
• v.8 no.1
• /
• pp.8-17
• /
• 2005

Purpose: This study was performed to investigate burden, job satisfaction and quality of life of nurses who take care of cancer patients. Methods: The subjects were 237 nurses working at the oncology unit of hospitals with over 500 beds in Seoul and Gyeonggi-do. Data were collected using questionnaire from the February to March, 2005. Data were analyzed through t-test, ANOVA, Pearson's correlation coefficient and stepwise multiple regression using SAS. Results: 1. The item that showed the highest level of burden was 'I feel limited even if I make efforts to reduce patients' pain. 'Burden was high in those group both who were younger than 35 years old and who had clinical experiences caring cancer patients for $3{\sim}4$ years. 2. The item that showed the lowest level of job satisfaction was 'the possibility of promotion'. Job satisfaction was high in those group both who had a spouse and were head nurses or incharge nurses. 3. The item that showed the lowest level of quality of life was 'I am physically exhausted'. Over 35 years old who had a spouse, and over 2,000,000 won monthly income made a high score in the quality of life. 4. There were negative correlations among burden, iob satisfaction and the quality of life. 5. The major factor affecting the quality of life was burden. Conclusion: The results of this study are expected to be utilized as basic data for developing support system to improve nurses' work conditions and quality of life.

• Journal of Nutrition and Health
• /
• v.42 no.5
• /
• pp.486-495
• /
• 2009

The purpose of this study was to analyze the performance evaluation index for a salt reduction project. Questionnaires were developed in order to investigate salt reduction programs nationwide. The evaluation index and programs were analyzed through the case study of a salt reduction program in public health centers. The validity of the salt reduction program's evaluation index was determined based on study of the Delphi survey and on discussion with nutrition and health care professionals. The Delphi survey showed that daily salt intake was the most valid nutritional evaluation index. Stroke mortality and stomach cancer mortality were good health care evaluation indexes. The method for measuring salt intake that had the greatest validity was a 24-hour urine collection. However, 24-hour urine collection had the lowest score for ease of performance. The combined scores of validity and ease of performance showed that the survey method for dietary attitude and dietary behavior, dietary frequency analysis (DFQ 15), and a salty taste assessment, in that order, were proper methods. The high reliability of the salty taste assessment indicated that the percentage of the population that exhibits proper salt intake (2,000 mg sodium or less daily) and the percentage of the population that consumes low-salt diets as nutritional evaluation indexes also will be helpful to evaluate performance of salt reduction programs.

• Korean Security Journal
• /
• no.62
• /
• pp.35-63
• /
• 2020

As the frequency and intensity of catastrophic disasters increase, there is widespread public sentiment that government capacity for disaster response and recovery is fundamentally limited, and that the involvement of civil society and the private sector is ever more vital. That is, in order to strengthen national disaster response capacity, governments need to build disaster systems that are more participatory and function through the channels of civil society, rather than continuing themselves to bear sole responsibility for these "wicked problems." With the advancement of smart mobile technology and social media, government and society as a whole have been called upon to apply these new information and communication technologies to address the current shortcomings of government-led disaster management. As illustrated in such catastrophic disasters as the 2011 Tohoku earthquake and tsunami in Japan, the 2010 Haitian earthquake, and Hurricane Katrina in the United States in 2005, the realization of participatory potential of smart technologies for better disaster response has enabled citizen participation via new smart technologies during disasters and resulted in positive impact on the management of such disasters. In this context, this study focuses on the South Korean context, and aims to analyze Korean government officials' readiness for public participation using smart technologies. On this basis, it aims to offer policy suggestions aimed at promoting smart technology-enabled citizen participation. For this purpose, it proposes a particular model, termed SMART (System, Motivation, Ability, Response, and Technology).

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.1
• /
• pp.103-113
• /
• 2020

Jack-up drilling rigs are widely used in the offshore oil and gas exploration industry. Although originally designed for use in shallow waters, trends in the energy industry have led to a growing demand for their use in deep sea and harsh environmental conditions. To extend the operating range of jack-up units, their design must be based on reliable analysis while eliminating excessive conservatism. In current industrial practice, jack-up drilling rigs are designed using the working(or allowable) stress design (WSD) method. Recently, classifications have been developed for specific regulations based on the load and resistance factor design (LRFD) method, which emphasises the reliability of the methods. This statistical method utilises the concept of limit state design and uses factored loads and resistance factors to account for uncertainly in the loads and computed strength of the leg components in a jack-up drilling rig. The key differences between the LRFD method and the WSD method must be identified to enable appropriate use of the LRFD method for designing jack-up rigs. Therefore, the aim of this study is to compare and quantitatively investigate the differences between actual jack-up lattice leg structures, which are designed by the WSD and LRFD methods, and subject to different environmental load-to-dead-load ratios, thereby delineating the load-to-capacity ratios of rigs designed using theses methods under these different enviromental conditions. The comparative results are significantly advantageous in the leg design of jack-up rigs, and determine that the jack-up rigs designed using the WSD and LRFD methods with UC values differ by approximately 31 % with respect to the API-RP code basis. It can be observed that the LRFD design method is more advantageous to structure optimization compared to the WSD method.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.3
• /
• pp.191-206
• /
• 2020

Although several studies have been conducted on unification and the life of North Korean refugees, there have been few studies comparing the characteristics of North Korean refugees with South Korean workers, in terms of human resources in business administration. By considering the limitations of these prior studies, this study analyzed whether there are differences in factors affecting organizational commitment and turnover intention through a group comparative analysis between North Korean refugees and South Korean workers. For a comparative analysis between the two groups, we recruited 145 workers from North Korea and 213 South Korea-born workers. We found the following results with a multi-group structural equation model. We confirmed the measurement homogeneity by ensuring that both groups were equally aware of the measurement tools affecting organizational commitment and turnover intentions. As a result of testing the homogeneity of measurement, we also confirmed that there was a significant difference in optimism between the two groups; optimism affects organizational commitment and among social supports, affectionate support and interaction support affect organizational commitment. Analyzing the path between the two groups, we first were able to find that optimism influenced organizational commitment for both groups, in relation to positive psychological capital. However, in terms of degree, South Korean workers were found to be strongly affected. Second, with regard to social support, we were not able to find that affectionate support and interaction support have a significant impact on organizational commitment for South Korean workers, while for North Korean refugees, we confirmed that both supports have a significant impact. Third, we were unable to find any differences between the two group, in terms of other sub-components of positive psychological capital (self-efficacy, hope, and resiliency) or the sub-components of social support (informational support, tangible support). These results suggest that companies or managers employing North Korean refugee workers need to create an organizational environment that allows them to perceive social support, especially affectionate support and interaction support.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.165-165
• /
• 2017

지난 수 십 년 동안, 전 세계적으로 자원의 소비가 급격히 증가하게 되면서 최근 자원 고갈은 물론 환경오염이 커다란 이슈로 문제가 되고 있다. 이에 따라 재료 관련 분야에 있어서는 보다 효율적이고 친환경적인 방법으로 자원을 활용해야 된다는 필요성이 대두되었고 이와 같은 관점에서 목적하는 성분이 우수하고 환경 친화적인 표면처리 재료 개발연구가 활발하게 진행되고 있는 실정이다. 그 중 플라즈마 전해 산화(Plasma Electrolytic Oxidation, PEO)는 알루미늄, 마그네슘 등의 경금속의 경도를 향상시키고 높은 내마모성, 내식성을 갖게 하는 표면처리로써 그 관심이 증가하고 있다. 이 플라즈마 전해 산화는 일반적으로 공정비용 대비 효과적이고 환경 친화적이며 코팅 성능 면에서 우수하다고 알려져 있다. 이러한 고유한 특성으로 인해 플라즈마 전해 산화 코팅은 최근 몇 년 동안 기계, 자동차, 우주항공, 의학 및 전기 산업 등의 분야에서 그 적용이 점차 증가하고 있는 상황이다. 한편, 플라즈마 전해 산화 코팅을 하는 모재들의 경우 부동태 산화피막을 용이하게 형성할 수 있는 특성의 모재에 한정되고 있어서 그 응용확대에 한계가 있는 것이 사실이다. 따라서 본 연구에서는 플라즈마 전해 산화법을 사용하여 용융알루미늄도금 강판 상에 산화피막 형성을 시도하였다. 전원공급 장치의 양극은 전해질 속에 잠겨있는 작동전극에 연결하고 음극은 대전극 역할을 하는 스테인레스강 전해질 용기에 연결되었다. 전해질은 Sodium Aluminate 및 기타 첨가제를 함유한 것을 사용하였고 온도는 열교환기를 사용하여 $30^{\circ}C$ 이하로 유지되었다. 또한 여기서 전류밀도는 $5{\sim}10A/dm^2$, 실험 주파수는 700Hz, Duty cycle은 30 및 90%의 각 조건에서 공정처리 시간을 각각 30분 및 60분 동안 진행하였다. 이와 같은 조건에서 형성한 막들에 대해서는 주사형전자현미경(SEM)을 이용하여 코팅 막의 표면 및 단면의 모폴로지를 관찰하였음은 물론 EDS 및 XRD 측정을 통하여 원소조성분포 및 결정구조를 각각 분석하였다. 또한 이 코팅 막들에 대한 내식성은 5% 염수분무 환경 중 노출시험(Salt spray test), 3% NaCl 용액에서의 침지 시험 및 전기화학적 동전위 양극분극(Potentiodynamic Polarization) 시험을 진행하여 평가하였다. 이상의 실험결과에 의하면, 제작조건별 플라즈마 전해 산화 코팅 막의 모폴로지 및 결정구조가 상이하게 나타나는 것을 알 수 있었다. 코팅 막의 모폴로지 관찰 결과, 공정 시간에 비례하여 표면에 존재하는 원형 기공의 수는 감소하였으나 그 크기가 커지고 크레이터의 직경 또한 커진 것이 확인되었다. 이 기공은 마이크로 방전에 의해 형성된다고 알려져 있는데 공정 시간이 증가함에 따라 코팅 두께가 점차 증가하여 마이크로 방전의 빈도수가 줄어들고 그 강도는 증가하게 되어 기공 크기가 증가한 것으로 사료된다. 또한 공정시간이 긴 시편에서 표면에 크랙이 다수 존재하는 것으로 확인되었다. 이것은 방전에 의해 고온이 된 소재가 차가운 전해질과 만나게 되어 생긴 큰 온도구배로 인해 강한 열응력이 발생하여 균열을 초래한 것으로 보인다. 조성원소 분석 결과 원형 기공 주변의 크레이터 영역에는 알루미늄이 풍부하였으며 그 주변에 결절상을 갖는 구조에서는 전해질 성분의 원소가 포함되어 있는 것이 확인되었다. 이러한 코팅 막의 표면 특성은 내식성에 영향을 주게 된 원인으로 사료된다. 동전위 분극측정 결과에 의하면 플라즈마 전해 산화 공정 시간이 길어질수록 부식전류밀도가 증가하였다. 이것은 공정시간이 길어짐에 따라 강한 방전이 발생하여 기공의 크기가 증가하고 크랙이 발생하게 되면서 내식성이 저하된 것으로 판단된다. 종합적으로 재료특성 분석 및 내식성 평가를 분석한 결과, 플라즈마 전해 산화의 공정 시간이 너무 길게 되면 오히려 내식성은 저하되는 것이 확인되었다. 이상의 연구를 통하여 고내식 특성을 갖는 플라즈마 전해 산화 막의 유효성을 확인하였으며 용융알루미늄강판 상에 실시한 플라즈마 전해 산화 처리에 대한 기초적인 응용 지침을 제시할 수 있을 것으로 사료된다.

• Journal of fish pathology
• /
• v.22 no.3
• /
• pp.263-273
• /
• 2009

There is an increasing number of reports describing Streptococcus parauberis as an important pathogen of cultured olive flounder Paralichthys olivaceus and starry flounder Platichthys stellatus in Korea. We tried to determine the effects of water temperature (14${^{\circ}C}$ and 21${^{\circ}C}$) on the pathogenicity in Streptococcal disease caused by S. parauberis. We have challenged 180 olive flounder by i.p injection to $2.0{\times}10^{7}$ live cells/fish. Mortality was monitored for 21 days post challenge. And histopathological characterizations as infection degree, tissue degeneration and/or bacterial distribution were investigated with H&E stain and in situ hybridization technique. Fifty percent and 16.7% of mortality occurred within 21 days at 21${^{\circ}C}$ and 14${^{\circ}C}$ water temperature, respectively. In most cases, the typical symptoms of olive flounder infected with S. parauberis were darkness of the skin, lethargy, mild abdominal distension cause by ascites, splenomegaly, congested liver and internal organs paleness. The pericardial sac contained large amounts of cloudy fluid. Numerous whitish nodules, which were variable in size and often confluent, were randomly scattered throughout the myocardium. Especially, pericarditis and/or myocarditis was observed in all tested fishes after death. Positive in reaction with S. parauberis were found in all tissues in situ hybridization analysis. The relative numbers of S. parauberis in heart were much more than in liver, spleen, kidney and stomach. We evaluated that S. parauberis strain causes serious damage in the pericardium, shortness of breath and the blood disorder. Therefore, pericarditis and myocarditis caused by S. parauberis were closely related to mortality of olive flounder.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.28 no.2
• /
• pp.119-126
• /
• 2012

State of problem: Cement-retained implant-supported prostheses are routinely used in dentistry. The use of high strength cements has become more popular with the increasing confidence in the stability of the implant-abutment screw connection and the high survival rates of osseointegrated implants. No clinical data on retention of metal copings using CAD/CAM. To evaluate retention of metal copings using CAD/CAM system bonded to short titanium abutment with four different cements and compare retentive strength of metal copings with sandblasting or without sandblasting before cementation. Forty titanium abutment blocks were fabricated and divided into 4 groups of 10 samples each. Forty metal copings with occlusal hole to allow for retention testing were fabricated using CAD/CAM technology. The four cements were Fujicem(Fuji, Japan), Maxcem Elite(Kerr, USA), Panavia F2.0(Kurarary, Japan) and Superbond C&B(Sunmedical, Japan). The copings were cemented on the titanium abutment according to manufacture's recommendation. All samples were stored for 24h at 37oC in 100% humidity and tested for retention using universal testing machine(Instron) at a crosshead speed of 1.0mm/min. Force at retentive failure was recorded in Newton. The mode of failure was also recorded. Means and standard deviations of loads at failure were analyzed using ANOVA and Paired t-test. Statistical significance was set at P<0.05. Panavia F2.0 provided significantly higher retentive strength than Fujicem, Maxcem Elite(P<0.05). Sandblasting significantly increased bond strength(P<0.05). The mode of failure was cement remaining principally on metal copings. Within the limitation of this study, Panavia F2.0 showed significantly stronger retentive strength than Fujicem, Maxcem Elite(p<0.05). The Ranking order of the cements to retain the copings was Panavia F2.0, Fujicem = Maxcem Elite. Sandblasting significantly increased bond strength(P<0.05). The retentive strength of metal copings on implant abutment were influenced by surface roughness and type of cements.

• Management & Information Systems Review
• /
• v.31 no.3
• /
• pp.223-248
• /
• 2012

This study analyses support policy and structural change of textile industry in Daegu Kyungbuk region, and suggests major issues for textile industry's innovation. In Daegu Kyungbuk, it was 1999 that a policy, so called Milano Project, in order to promote a textile industry was devised. In 2004, the Regional Industrial Promotion Plan was devised. The plan was born from a view point of establishing a regional innovation system and of promoting the innovative clusters under a knowledge based economy. After then, the Regional Industry Promotion Project or Regional Strategic Industry Promotion Project became a core of regional textile industrial policy. Research results indicated that the first stage Milano project (1999-2003) showed both positive and negative effects. There were no long-term development plan, clear vision and strategy. But, core industrial infrastructure for differentiated product development, such as New product Development Support Center and Dyeing Design Practical Application Center, was constructed. The second stage Daegu Textile Industry Promotion Plan (2004-2008) displayed a significant technological performance and new product sales with the assistance of Kyungbuk province. Also, textile industry revealed positive fruits such as financial structure, productivity, and profitability as a result of strong restructuring. In industrial structure, there was a important change from clothe textile material to industry textile material. Most of textile companies did not showed high capability in CEO's technology innovation intention, entrepreneurship, R&D and human resource competency in compare with other industry. We suggested that Daegu Kyungbuk has to select and concentrate on the high-tech textile material and living textile for sustainable development and competitiveness. We also proposed a confidence and cooperation based innovation network and company oriented innovation cluster.