• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.2
• /
• pp.98-104
• /
• 2018

Nondestructive strength Equations are commonly used to determine the strength of concrete. However, the application of the existing equations may include many errors because this method is proposed on the basis of limited experimental parameters while actual bridges have various parameters such as conditions of concrete mixtures, properties of concrete strength, etc. Also, the error among the existing equations causes the confusion when engineers select the proper estimation equation for the concerned bridge. In this study, a series of the field inspection and the test have been performed on 297 existing bridges, in order to evaluate the bridges, based on the test results of the in-depth inspection, and the estimated strengths by means of the nondestructive strength equations are analyzed and compared with results of the core specimen strengths. According to results of analyses, the nondestructive strength equation proposed by CNDT Committee of Architectural Institute of Japan had high relationship with core strength. However, the strengths predicted by this equation, are underestimated when concrete's strengths are over 30 MPa, otherwise, they are overestimated. Also in this paper, based on the relationship between the estimated nondestructive concrete strengths and the core specimen strengths the modified strength equation through simple correlation analysis is proposed.

• Journal of the Korea Concrete Institute
• /
• v.14 no.1
• /
• pp.1-7
• /
• 2002

The purpose of this research is to obtain a practical expression for the estimation of compressive strength of concrete using non-destructive testing method such as rebound Schmidt hammer and ultrasonic pulse

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.2
• /
• pp.145-150
• /
• 2019

This paper proposes a model for the calculation of the ultimate torsional strength in normal-strength and high-strength concrete beams which include the concrete contribution strength and use a reasonable thickness of shear flow. The adequacy of the proposed model is evaluated by comparing the calculated torsional strength with the experimentally observed results from 104 test specimens reported in the literature. The results are also compared with the calculations of the KCI and the ACI building code equations, and those of other model which include the concrete contribution strength. The comparisons show that the ultimate torsional strengths calculated by the proposed equation and Rahal's equation are closer to the experimentally observed results than those calculated by the code equations.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.4
• /
• pp.25-34
• /
• 2015

Proposed equation is used many time in calculation of concrete compressive strength using the non-destructive testing at precision safety diagnosis. Most of proposed equation is suggested in abroad and have an error to estimate concrete compressive strength in the domestic. Therefor, proposed equation is low reliability to estimate concrete compressive and it has a significant effect in reliability of precision safety diagnosis. Nevertheless, It is possible to increase the reliability through a number of experiments from this problem that occurs in some localized part. This paper is proposed assessment formula of reliability related core compressive strength to increase the reliability. It is verified that reliability of proposed assessment formula is useful by probabilistic techniques. It is compared with each graphs of concrete compressive strength of proposed equation. It has been found that the present methods are very efficient.

• Magazine of the Korea Concrete Institute
• /
• v.10 no.1
• /
• pp.119-124
• /
• 1998

콘크리트는 시멘트, 잔골재 및 굵은 골재, 물 및 첨가제의 양이나 투입순서 ,혼합방법등 여러 가지 요인에 따라 성질이 바뀌게 되는 복합재료이다. 따라서 넓은 의미에서 품질 판정의 한 수단이 되는 콘크리트의 설계기준강도 또는 압축강도 fc'(=28일 압축강도)는 물론 기타의 성질도 정확한 예측이 불가능하다. 즉 소요강도를 목표로 배합된 공시체의 시험결과는 예외없이 통계적 가변성을 나타낸다. 여기에서는 공시체의 7일 강도의 평균치 및 표준 편차와 공시체의 28일 강도 측정치로부터 콘크리트의 압축강도를 추정하는식을 제안하였다. 이를 위하여 7,320개의 강도시험자료를 수집한 후 이들을 선형 회귀 분석법으로 처리하였다. 제안된 식에 의한 콘크리트의 압축강도는 타 추정식에 의한 값보다 실측치에 좀 더 근접함을 보여주었다. 또한 제안식의 검정을 위해 서울지역 자료 5,200개를 수집하여 제안식과 JIS, Slater식과의 오차를 비교한 결과에 따르면 제안식이 더 안전측임을 알 수 있었다. 그리고 슈미트 햄머에 의한 현장 실측 강도와 제안식과의 콘크리트 강도 오차는 대체로 2.3%이었다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1503-1506
• /
• 2007

수공구조물의 설계를 위해서 주로 사용되는 강우강도식은 연최대치 강우자료를 이용하여 빈도별 혹은 지속기간별 확률강우량을 구한 후 이 값들을 선형 혹은 비선형식의 형태로 회귀분석하여 구하게 된다. 그러나, 이와 같이 회귀분석을 이용하여 추정된 강우강도식은 원래의 강우자료가 가지고 있는 확률적인 특성을 재현한다고 하기는 어렵기 때문에, 본 연구에서는 연최대치 강우자료에 대한 적정 확률분포형으로부터 직접 강우 강도식을 유도하는 방법을 적용하여 대상지역 강우강도식의 매개변수를 산정하였다. 선정된 적정 확률분포형을 이용하여 강우강도식의 매개변수를 추정하는데 있어서, 평균제곱오차의 제곱근을 최소화하는 형태의 목적함수를 구성한 후 유전자알고리즘을 이용하여 적절한 매개변수를 산정하였다. 산정된 매개변수를 사용한 강우강도식으로 구한 결과값과 기존의 강우강도식에 의한 결과값 그리고 지점빈도해석에 의한 결과값을 비교하여 본 연구에서 산정된 강우강도식의 적용성을 평가해 보았다.

• Journal of the Korean Geotechnical Society
• /
• v.30 no.3
• /
• pp.73-85
• /
• 2014

The strength parameters used in rock mass design are mainly estimated by equations using Hoek-Brown failure criterion because the tests to obtain the values are limited and expensive. To estimate the strength parameters, the Hoek-Brown failure criterion should be transformed to the Mohr-Coulomb failure criterion. But the processes are more or less cumbersome due to the several stages including the computation and the analyzing steps. In this study, several rock states of various conditions were modeled and then the strength parameters were estimated using the Hoek-Brown failure criterion. Thereafter by analyzing the results, some charts and equations estimating the strength parameters through only one step or easily in the field using the values of RMC, the uniaxial compressive strength and the rock constant ($m_i$), were suggested. And then the suggested method was compared and discussed with the existing method.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.4
• /
• pp.127-135
• /
• 1993

The ultimate strength formulas of ship panels are suggested in a simple and suitable form. Firstly, these formulas are derived from a full description of the variables that govern plate strength by using statistical data of actual ships. Secondly, under the assumption of plate mid-edge collapse using the Von-Mises' yield criterion and the new buckling formula, a general equation for the ultimate strength estimation is also derived. The existing test data are compared with these new formulas and a good correlation is shown.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.194-194
• /
• 2020

본 연구에서는 수평반사도를 이용한 강우추정 관계식을 유효성 측면에서 재평가하였다. 이를 위해, 강우추정 관계식의 유도과정을 다시 살펴보고, 관측자료를 가지고 강우입자분포의 매개변수를 추정할 수 있도록 식의 형태를 변환하였다. 이 식을 이용하여 비슬산 레이더에서 관측된 반사도-강우강도의 쌍 자료에 대한 강우입자분포 매개변수를 추정하였다. 마지막으로 추정된 매개변수 대푯값을 다시 강우추정 관계식 유도에 사용하였다. 이렇게 결정된 강우추정 관계식이 관측된 수평반사도-강우강도 자료를 얼마나 잘 대표하는지를 평가하였으며, 그 결과, 레이더 반사도가 작아지면 작아질수록 강우추정 관계식의 이론적 배경과 관측자료의 괴리가 커지는 것으로 나타났다. 또한 강우입자분포를 지수분포로 가정한 형태의 강우추정 관계식이 모든 반사도 구간에서 유의하지 않을 수 있다는 것을 확인하였다.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.3
• /
• pp.229-235
• /
• 2016

In construction field, it used various technique for concrete formwork. Part of them, non-destructive test has been conducted to estimate a compressive strength of concrete easily such as rebound method and ultrasonic pulse velocity method etc. Former research has recommend proposed equation based on experimental data to investigate strength of concrete but it was sometimes deferent actual value of that from in field because of the few of data in case of early strength concrete. In this study, an experiment was conducted to analyze strength properties for early strength concrete using cylinder mold and $1,000mm{\times}1,000mm{\times}200mm$ rectangular specimen. And compressive strength of concrete was tested by non-destructive test, and calculated by the equation proposed former research. As a result, the non-destructive test results showed approximately 70 percent of the failure test value for all conditions, and worse reliability was obtained for high strength concrete samples when the ultrasonic pulse velocity method was used. Based on the scope of this study, the experimental equation for estimating compressive strength of early strength concrete from 24MPa to 60MPa was proposed.