• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.1830-1834
• /
• 2006

본 연구에서는 강우의 수문학적 특성을 고려하여 도시지역에서의 시간분포를 분석하고, Huff의 무차원 누가곡선 및 Yen과 Chow의 무차원 특성변수를 제시하였으며, 강우의 수문학적 특성은 지속기간, 강우의 발생원인(장마, 태풍, 집중호우, 전선형 강우), 강우강도 등으로 분류하였다. 본 연구의 수행으로 인해 얻어진 결과를 요약하면 다음과 같다. 첫째, 국내 도시지역의 단시간 강우의 최대강우강도는 전방위구간에서 발생할 확률이 가장 높게 나타났으며, 둘째, 강우발생원인별 분류에서도 전반적으로 전방위구간에서, 태풍의 경우에는 후방위구간에서 최대강우강도가 발생하였다. 셋째, 평균강우강도이하의 경호우와 평균강우강도이상의 중 호우에서는 전방위구간에서 최대강우강도가 발생하였다. 넷째, 전기간 강우자료를 이용한 기존 연구들의 무차원 누가곡선 및 특성변수와의 비교를 실시하여, 수문학적 특성에 따라 무차원 누가곡선의 위치 및 특성변수의 값에서 차이가 발생한다는 것을 알 수 있었다.

• Journal of Korean Society of Steel Construction
• /
• v.18 no.2
• /
• pp.271-278
• /
• 2006

This paper is to investigate into the stress-strain curves for austenite stainless steel STS 304 over the full strain range. The Ramberg-Osgood expression is useful up to the beyond the0.2% proof stress in the ultimate state. The Rasmussen curve has developed for stresses beyond 0.2% proof stress, based on the Ramberg-Osgood concept. These expressed curves don't good agree with the test results. It is here proposed the based on the analysis of the test results better curve.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.275-275
• /
• 2023

기후변화는 우리의 현실로 다가와 있지만 기후변화로 인해 어떠한 일이 벌어질 것인지는 정확하게 알 수 없는 문제가 있다. 특히 호우의 강도와 지속시간 등은 수문설계에 영향을 미치는 주요한 인자 임에도 불구하고 과학적이고 합리적인 추론이 쉽지 않다. 본 논문에서는 일본에서 대규모 기후 앙상블 모의실험 기반으로 생성된 d4PDF(Data for Policy Decision Making for Future Change)자료 중 시간 단위의 강수앙상블 모의 자료를 이용하여 기상청 서울지점의 강우강도-지속시간-생기빈도 곡선(Intensity-Duration-Frequency Curve; IDF 곡선)의 변화를 추정해 보았다. 이를 위하여 대용량의 자료를 확보하고 서울지점에서의 과거 50년간의 실측자료와 동일기간의 모의자료에 대한 연최대치 계열에 분위사상법을 적용하여 모의자료의 계통적 오차를 소거할 수 있는 함수를 추정하고 이를 이용하여 미래 시나리오에 적용함으로써 지구평균기온 상승에 대응하는 서울관측지점의 IDF 곡선을 추정하여 제시하였다. 추정 결과의 내용은 다양한 요소에 의해 영향을 받는 미래 기후에 대한 내용이라 신뢰성의 평가가 어렵지만 기존의 강우강도에 일률적으로 위험률을 곱하는 방식보다는 좀 더 합리적인 방법이라 생각되며 향후 수문설계 등에 고려될 수도 있을 것이다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.3
• /
• pp.311-320
• /
• 2014

High strength concrete is not only vulnerable to the occurrence of spalling which generates the loss of cross-section in concrete structures but produces faster degradation in its mechanical properties than normal strength concrete in the event of fire. This study aims to evaluate fire resistance of high strength segment concrete with PET fibers mixed to prevent spalling under ISO834 (2hr) and RABT fire curve. As results, the samples without PET fibers show the concrete loss up to the depth of about 8 cm and 9.5 cm from the surface exposed to fire under ISO834 and RABT fire curve respectively. The samples mixed with PET fiber of 0.1% show no spalling under ISO834 fire curve and the spalled thickness of 6.5 cm under RABT fire curve after the fire tests. Finally, the sample mixed with PET fiber of 0.2% shows no spalling under RABT fire curve. The results indicate that the suitable amounts of PET fiber for securing fire resistance performance of this high strength segment concrete are 0.1% under ISO834 fire curve and 0.2% under RABT fire curve. However, even though spalling does not occur, it is necessary to repair the deterioration of concrete up to 4 cm from the surface exposed to fire after fire.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.2
• /
• pp.161-168
• /
• 2018

This study is the analytical review on the inelastic region of CRC column strength curve. The inelastic region of CRC column strength curve is based on the Bleich theory and the maximum residual stress of $0.5{\sigma}_y$. This is somewhat conservative by considering the fact that the maximum residual stress of $0.3{\sigma}_y$ is well known. This study proposes column strength curve for nonlinear behavior of hot rolled structural steel members under axial force and tangent modulus Et, with the maximum residual stress of $0.3{\sigma}_y$ and compares them with those of CRC. The stress of the inelastic column under axial compression exceeds proportional limits and reaches yielding point before applied load render the column bent. The column strength curve that depends on gradually yielding state of section needs to be reviewed. In this study, it is derived that the critical load formular according to material yielding with the maximum residual stress of $0.5{\sigma}_y$ and compared with CRC column design curve.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.3A
• /
• pp.367-373
• /
• 2008

In the design of horizontally curved plate girder web panels, it is required to evaluate accurately the elastic buckling strength under pure shear. Currently, elastic shear buckling coefficients of curved web panels stiffened by transverse intermediate stiffeners are determined by assuming conservatively that straight web panels without curvature are simply supported at the juncture between the flange and web. However, depending upon the geometry and the properties of the curved plate girder, the elastically restrained support may behave rather closer to a fixed support. The buckling strength of curved girder web is much greater (maximum 38%) than that of a straight girder calculated under the assumption that all four edges are simply supported in Lee and Yoo (1999). In the present study, a series of numerical analyses based on a 3D finite element modeling is carried out to investigate the effects of geometric parameters on both the boundary condition at the juncture and the horizontal curvature of web panel, and the resulting data are quantified in a simple design equation.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.1
• /
• pp.65-76
• /
• 2009

The unsaturated characteristics of Korean weathered granite soils have been studied to investigate the influence of saturated permeability, rainfall intensity and soil-water characteristic curve (SWCC) on the slope stability. The upper, average and lower SWCCs were estimated from the publication and experimental results using the statistical concept. The roughly estimated SWCC can be used for the soils without experimental results by relating SWCC with the particle size distribution curve. An appropriate ratio between the saturated permeability and the rainfall intensity ($k_s$/i) was also suggested for practical use in designing the slopes by investigating the time-dependent variation of slope instability during the rainfall. The slope stability was deteriorated from the initiation of rainfall and recovered again after the factor of safety reached the critical value. The FS of the slope decreased at first and then increased after reaching the critical value during the rainfall. As a result, the slope instability was not related with an absolute rainfall intensity but with the ratio between the saturated permeability and the rainfall intensity. In case of the upper SWCC, the critical condition occurred when the ratio between the saturated permeability and the rainfall intensity was in the range of $1.0{\sim}2.0$.

• International Journal of Highway Engineering
• /
• v.7 no.1 s.23
• /
• pp.83-92
• /
• 2005

Maturity method is a non-destructive method for estimating in-place concrete strength as a function of time and temperature. The main objective is to use maturity method determining joint sawing and traffic opening time for whitetopping construction in Korea. Another objective is to investigate the influence of air temperature in the correspondence to slab temperature and maturity value. For determining the joint sawing and traffic opening time, thermachron i-button and strain gage were inserted in the fresh concrete in the slab and a maturity value was calculated at desired times. In-place strength was then estimated from a pre-established relationship between maturity values and compressive strength. The results showed that there are significant differences between the estimated strength obtained from maturity curve and in-place concrete strength. The reasons are that the gain of in-place concrete strength was influenced by several factors in the field such as curing conditions, air temperature, and wind speed etc. Also, the results showed that air temperature had significant influence on slab temperature and maturity value The slopes of maturity curves exponentially decrease as air temperature decreases. This means that maturity value sharply dropped as air temperature decreases.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.5
• /
• pp.285-292
• /
• 2007

This study was developed the metallic plate for fixation in the femur fracture for the orthopedic region and rigid fixation with plates has a firm place in fracture treatment. Most plates can be used for rigid as well as biological and dynamical fracture fixation. The device's designation and sizing has a specific with bending structural stiffness and strength, known meaning that is reliable regardless of the plate by the short type and long type. Short plate have a wrapping of femur and long plate have to preserve a pole of femur. The bending strength of the curved metallic long plate has to evaluate a 11,000N and The bending strength of the curved metallic short plate has to evaluate a 6,525N. The tensile stress through to press a plate is $1573N/m^2\;and\;1539N/m^2$. The device can be used to support Revision case of Hip Implant and to use a case of Hip screw compression of Hip Neck Fracture.

• Journal of the korean Society of Automotive Engineers
• /
• v.5 no.3
• /
• pp.24-32
• /
• 1983

전기 동저항 제어실험을 통해 다음과 같은 결론을 얻었다. (1) 점용접 과정에서 동 저항이 용접질(용접강도)을 잘 나타내 준다. 1) 동저항 곡선의 peak가 발생하는 시간이 이르면 일반적으로 늦게 나타난 것보다 용접질이 좋다. (단, expulsion이 발생하지 않을 때까지). 2) peak에서의 저항값과 용접시간 끝에서의 저항값 차이가 클수록 일반적으로 용접질이 좋다. (2) 한 동 저항곡선에 다른 동 저항곡선을 맞추려는 제어를 할 때는 다음과 같은 관계가 있다. 1) P-control로는 동저항을 추적하는 효과를 충분히 얻을 수 없고 적분제어기를 추가한 PI-control을 하면 잘 추적한다. 2) 용접질의 관점으로 볼 때 원하는 용접강도를 얻으려고 PI제어를 하면 그 용접 평균강도에 아주 근사한 강도를 얻을 수 있다.