• Food Science of Animal Resources
• /
• v.30 no.1
• /
• pp.87-94
• /
• 2010

The aim of the present study was to develop polyclonal antibodies to regional inedible adipocytes of pigs and investigate the effect of these antibodies on adipocytes in vitro. As antigens, abdominal and subcutaneous adipocyte PMPs from pigs were injected into sheep 3 times per 3 wk intervals for passive immunization, and non-immunized serum, antisera against abodominal (AAb) or subcutaneous adipocyte PMPs (SAb) were collected before and after the injections. Titers of the antisera obtained from sheep and their cross-reactivities with the heart, kidney, liver, lung, muscle, and spleen of pig were determined by ELISA. Isolation and culture of abdominal and subcutaneous adipocytes from pigs were performed to analyze LDH concentration. At a 1:1,000 dilution, little antibody reactivity was observed for non-immunized serum whereas both AAb and SAb had relatively strong reactivity up to a dilution of 1:16,000. These findings may indicate that strong antibodies against adipocyte PMPs can be developed using an immunological approach. Extremely low reactivity of AAb and SAb was detected with the PMPs of the organs. Both antisera most strongly reacted with each adipocyte PMPs and showed statistically (p<0.05) higher cross-reactivities compared with the non-immunized serum. In conclusion, these results may indicate that the present polyclonal antibodies against regional inedible adipocyte PMPs are well developed and are safe against cross-reactivities with the organs of pigs. Further studies on the in vivo nutritional safety and fat reduction of these antibodies in pigs will be required fat-reduced high quality pork production.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.2
• /
• pp.293-300
• /
• 2012

This study was to investigate the unsuitable rate of the storage facilities, the changes in corrosion process over time after installation according to the status, the time to install the facilities, years elapsed after facilities installation, inspection of methods and motivation, and so on, based on the results of the inspection at the petroleum storage facilities conducted by domestic soil-relate specialized agency to derive optimal management plans which meet the status of soil contamination facilities. The results showed that the facilities more than 5 years after the initial leak test at the time of the installation need to be inspected periodically by considering costs of leak test and remediation of polluted soil. The inspection period can be decided by cost and leak test methods showing discrepancies for the results obtained from individual test whether it was direct or indirect. To compensate these matters, we suggested that the direct inspection method on regular schedule is recommended. On the other hand, the inspection can be voluntarily completed to ease burden of the results by inspection or equivalent level to this inspection method. Also, it may need improved construction supervision and performance test system to minimize the occurrence of the nature defects in installing the facilities as well as the upgrade program for the facilities during intervals of inspection period.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.57-58
• /
• 2011

III-V족 화합물 반도체의 일종인 InSb는 77 K에서 0.23 eV의 작은 밴드 갭을 가지며 높은 전하 이동도를 가지고 있기 때문에 대기권에서 전자파 흡수가 일어나지 않는 3~5 ${\mu}m$범위의 장파장 적외선 감지가 가능하여 중적외선 감지 소자로 이용되고 있다. 하지만 InSb는 밴드 갭이 매우 작기 때문에, 소자 제작시 누설전류에 의한 소자 특성의 저하가 문제시 되고 있다. 또한 다른 화합물 반도체에 비해 녹는점이 낮고, 휘발성이 강한 5족 원소인 Sb의 승화로 기판의 화학양론적 조성비(stoichiometry)가 변하기 쉬워, 계면특성 저하의 원인이 된다. 따라서 우수한 특성을 가지는 적외선 소자의 구현을 위해서, 저온에서 계면 특성이 우수한 고품질의 절연막 증착 연구가 필수적이다. 본 연구에서는 InSb 기판 위에 $SiO_2$, $Si_3N_4$의 절연막 형성시 증착온도의 변화에 따른 계면 트랩 밀도를 분석하였다. $SiO_2$, $Si_3N_4$ 절연막은 플라즈마 화학 기상 증착법(PECVD)을 이용하여 n형 InSb 기판 위에 증착하였으며, 증착온도를 $120^{\circ}C$부터 $240^{\circ}C$까지 변화시켰다. Metal oxide semiconductor(MOS) 구조 제작을 통하여, 커패시턴스-전압(C-V)분석을 진행하였으며, 절연막과 InSb 사이의 계면 트랩 밀도를 Terman method를 이용하여 계산하였다[1]. 또한, $SiO_2$와 $Si_3N_4$의 XPS 분석과 TOF-SIMS 분석을 통하여 계면 트랩 밀도의 원인을 밝혀 보았다. $120{\sim}240^{\circ}C$ 온도 범위에서 계면 트랩 밀도는 $Si_3N_4$의 경우 $2.4{\sim}4.9{\times}10^{12}cm^{-2}eV^{-1}$, $SiO_2$의 경우 $7.1{\sim}7.3{\times}10^{11}cm^{-2}eV^{-1}$ 값을 나타냈고, 두 절연막 모두 증착 온도가 증가할수록 계면 트랩 밀도가 증가하는 경향을 보였다. 그러나 모든 샘플에서 $Si_3N_4$의 경우, flat band voltage가 음의 전압으로 이동한 반면, $SiO_2$의 경우, 양의 전압으로 이동하는 것을 확인할 수 있었다. 계면 트랩 밀도 증가의 원인을 확인하기 위해서, oxide를 $120^{\circ}C$, $240^{\circ}C$에서 증착시킨 샘플을 XPS 분석을 통하여 깊이에 따른 성분분석을 하였고, 그 결과, $240^{\circ}C$에서 증착된 샘플에서 계면에서 $In_2O_3$와 $Sb_2O_3$ 피크의 증가를 확인하였다. 이는 계면에서 oxide양이 증가함을 의미하며, 이렇게 생성된 oxide는 계면 트랩으로 작용하므로, 계면 특성을 저하시키는 원인으로 작용함을 알 수 있었다. Nitride 절연막을 증착시킨 샘플은 TOF-SIMS 분석을 통해, 계면에서의 성분 분석을 하였고, 그 결과, $240^{\circ}C$에서 증착된 샘플에서 In-N, Sb-N, Si-N 결합의 감소를 확인하였다. 이렇게 분해된 결합들의 dangling 결합이 늘어 계면 트랩으로 작용하므로, 계면 특성을 저하시키는 원인으로 작용함을 알 수 있었다. 최종적으로, 소자특성을 확인 하기 위하여 계면 트랩 밀도가 가장 낮게 측정된 $200^{\circ}C$ 조건에서 $SiO_2$ 절연막을 증착하여 InSb 적외선 소자를 제작하였다. 전류-전압(I-V) 분석 결과 -0.1 V에서 16 nA의 누설 전류 값을 보였으며, $2.6{\times}10^3{\Omega}cm^2$의 RoA(zero bias resistance area)를 얻을 수 있었다. 절연막 증착조건의 최적화를 통하여, InSb 적외선 소자의 특성이 개선됨을 확인할 수 있었다.

• Korean Chemical Engineering Research
• /
• v.60 no.2
• /
• pp.249-254
• /
• 2022

With the rapid advance of the semiconductor and Information and communication technologies, remote environment monitoring technology, which can detect and analyze surrounding environmental conditions with various types of sensors and wireless communication technologies, is also drawing attention. However, since the conventional remote environmental monitoring systems require external power supplies, it causes time and space limitations on comfortable usage. In this study, we proposed the concept of the self-powered remote environmental monitoring system by supplying the power with the levitation-electromagnetic generator (L-EMG), which is rationally designed to effectively harvest biomechanical energy in consideration of the mechanical characteristics of biomechanical energy. In this regard, the proposed L-EMG is designed to effectively respond to the external vibration with the movable center magnet considering the mechanical characteristics of the biomechanical energy, such as relatively low-frequency and high amplitude of vibration. Hence the L-EMG based on the fragile force equilibrium can generate high-quality electrical energy to supply power. Additionally, the environmental detective sensor and wireless transmission module are composed of the micro control unit (MCU) to minimize the required power for electronic device operation by applying the sleep mode, resulting in the extension of operation time. Finally, in order to maximize user convenience, a mobile phone application was built to enable easy monitoring of the surrounding environment. Thus, the proposed concept not only verifies the possibility of establishing the self-powered remote environmental monitoring system using biomechanical energy but further suggests a design guideline.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.9
• /
• pp.24-33
• /
• 2017

Multitemporal MODIS vegetation index (VI) data are widely used in vegetation monitoring research into environmental and climate change, since they provide a profile of vegetation activity. However, MODIS data inevitably contain disturbances caused by the presence of clouds, atmospheric variability, and instrument problems, which impede the analysis of the NDVI time series data and limit its application utility. For this reason, preprocessing to reduce the noise and reconstruct high-quality temporal data streams is required for VI analysis. In this study, a data reconstruction method for MODIS NDVI is proposed to restore bad or missing data based on the statistical properties of the oscillations in the NDVI temporal dynamics. The first derivatives enable us to examine the monotonic properties of a function in the data stream and to detect anomalous changes, such as sudden spikes and drops. In this approach, only noisy data are corrected, while the other data are left intact to preserve the detailed temporal dynamics for further VI analysis. The proposed method was successfully tested and evaluated with simulated data and NDVI time series data covering Baekdu Mountain, located in the northern part of North Korea, over the period of interest from 2006 to 2012. The results show that it can be effectively employed as a preprocessing method for data reconstruction in MODIS NDVI analysis.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.5
• /
• pp.648-654
• /
• 2004

The Mass Flow Controller(MFC) has become crucial in semiconductor manufacturing equipments. It is an important element because the quality and the yield of a semiconductor process are decided by the accurate flow control of gas. Therefore, the demand for implementing the high speed and the highly accurate control of MFCs has been increasing. It is hard to find an article of the control algorithm applied to MFCs. But, it is known that commercially available MFCs adopt PID control algorithms. Particularly, when the system detects the flow by way of heat transfer, the MFC control problem includes the slow response and the nonlinearity. In this paper, MFC control algorithm with a superior performance to the conventional PID algorithm is discussed and the superiority is demonstrated through the experiment. A fuzzy controller was utilized in order to compensate the nonlinearity and the slow response, and the performance is compared with that of an MFC currently available in the market. The control system, in this paper, consists of a personal computer, the data acquisition board and the control algorithm carried out by LabWindows/CVI program on the PC. In addition, a method of estimating the actual flow from the sensor output with the slow response is presented. In conclusion, according to the result of the experiment, the proposed algorithm shows better accuracy and is faster than the conventional controller.

• Food Science of Animal Resources
• /
• v.28 no.3
• /
• pp.251-255
• /
• 2008

This study was conducted to determine the effects of dietary supplementation with CLA (0, 0.5, 1.0, 1.5, and 2.0%) on the proximate composition, sensory evaluation, pH, TBARS, cooking loss, WHC, shear force and objective color of chicken meat. Two hundred broiler chickens (Arbor Acre Broiler, male) were randomly assigned to five groups, fed for five weeks, and slaughtered. The proximate composition and crude protein of thigh muscle from the 1.5% and 2.0% CLA groups were significantly higher than the other groups (p<0.05), however there was no difference in moisture, crude fat, and crude ash. Based on sensory evaluation, tenderness, juiciness, and flavor were not significantly different among the treatment groups. The pH of thigh muscle from the CLA treated groups was higher than the control, and significantly increased with the increasing levels of CLA in the broiler diets (p<0.05). TBARS values were significantly lower in the CLA treated groups, and decreased with increasing CLA levels in the diet (p<0.05). Therefore, CLA may improve the shelf life of chicken meat. WHC, shear force, and meat color did not show any significant variation in this study. In conclusion, the accumulation of CLA and the production of fresh chicken meat without changes in meat quality can be achieved through supplementation with 2% CLA. Accumulation of CLA in chicken meat significantly increased with increasing CLA levels in the diet.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.6
• /
• pp.709-714
• /
• 2018

This study researched the reasons for changing polarity in accordance with junction properties in an interface of semiconductors. The contact properties of semiconductors are related to the effect of the semiconductor's device. Therefore, it is an important factor for understanding the junction characteristics in the semiconductor to increase the efficiency of devices. For generation of various junction properties, carbon-doped silicon oxide (SiOC) was deposited with various argon (Ar) gas flow rates, and the characteristics of the SiOC was varied based on the polarity in accordance with the Ar gas flows. Tin-doped zinc oxide (ZTO) as the conductor was deposited on the SiOC as an insulator to research the conductivity. The properties of the SiOC were determined from the formation of a depletion layer by the ionization reaction with various Ar gas flow rates due to the plasma energy. Schottky contact was good in the condition of the depletion layer, with a high potential barrier between the silicon (Si) wafer and the SiOC. The rate of ionization reactions increased when increasing the Ar gas flow rate, and then the potential barrier of the depletion layer was also increased owing to deficient ions from electron-hole recombination at the junction. The dielectric properties of the depletion layer changed to the properties of an insulator, which is favorable for Schottky contact. When the ZTO was deposited on the SiOC with Schottky contact, the stability of the ZTO was improved by the ionic recombination at the interface between the SiOC and the ZTO. The conductivity of ZTO/SiOC was also increased on SiOC film with ideal Schottky contact, in spite of the decreasing charge carriers. It increases the demand on the Schottky contact to improve the thin semiconductor device, and this study confirmed a high-performance device owing to Schottky contact in a low current system. Finally, the amount of current increased in the device owing to ideal Schottky contact.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.11
• /
• pp.1497-1506
• /
• 2008

In relation to making tofu with red ginseng extract, the effects of added red ginseng extract on the storage and antioxidant activity of tofu were investigated. When red ginseng extract was added in $0.5%{\sim}2%$ of dried soybean, differences in texture, color and sensory properties were compared. The textural properties of tofu slightly increased depending on the added amount of red ginseng extract in terms of the hardness and springiness: significant difference was demonstrated in the tofu with 2% red ginseng extract, and the color properties also significantly increased in terms of the values of L, a, and b. As a result of sensory evaluation, although the preference to color tended to diminish, as the peculiar taste of red ginseng was significantly perceived, the overall preference did not show any statistical difference. Therefore, the addition of red ginseng extract may be interpreted as not having negative effect on the preference of consumers. There was no change at the early stage of storage in pH, turbidity and total microbial count when the tofu was stored at $15^{\circ}C$. However, the changes in pH and in turbidity, and total microbial counts according to the addition of red ginseng extract took place from the second day and from the sixth day of storage, respectively, suggesting that the shelf-life of tofu may be extended due to its antimicrobial effect. Especially, the highest antimicrobial effect was observed tofu with 2% red ginseng extract. Concerning the antioxidant activity of tofu using oxygen radical absorbance capacity (ORAC) assay, the antioxidant activity significantly increased along with the increase in concentration of red ginseng extract. In ORACOH.assay, the pro-oxidant activity was shown in the tofu added with red ginseng extract.

• Korean Journal of Food Science and Technology
• /
• v.43 no.4
• /
• pp.419-425
• /
• 2011

Changes in the flavor of muskmelons stored at different temperatures were examined to judge aroma patterns during storage. A mass-spectrometry based electric nose was used to distinguish the subtle differences in the muskmelon's volatile compounds. The data were used for a discriminant function analysis (DFA), and then the partial least square algorithm was used for a quantitative analysis. Volatile components in the muskmelons increased with storage, and the first discriminant function score (DF1: $r^2$=99.88%, F=3072.5) moved from a positive position to a negative position as the storage period increased. The proper point of maturity was anticipated as the $28^{th}$ day at 0$^{\circ}C$, $21^{st}C$ day at 4 and 7$^{\circ}C$, and $14^{th}$ day at 10$^{\circ}C$. Also, using the DF1 score we could predict the general tendency (vitamin C, stem moisture, acidity) of the muskmelons. The electronic nose revealed that the major volatile compounds that changed during storage of the melons were ethyl ethyl acetate, butyl acetate, nonanol, dodecanoic acid, hexadecanoic acid and tricosane. The amount of volatile compounds detected increased during storage.