• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.141-146
• /
• 2018

Recently, location recognition technology has attracted much attention, especially for locating people or objects in an indoor environment without being influenced by the surrounding environment GPS technology is widely used as a method of recognizing the position of an object or a person. GPS is a very efficient, but it does not allow the positions of objects or people indoors to be determined. RFID is a technology that identifies the location information of a tagged object or person using radio frequency information. In this study, an RFID system is constructed and the position is measured using tags. At this time, an error occurs between the actual and measured positions. To overcome this problem, a neural network is trained using the measured and actual position data to reduce the error. In this case, since the number of read tags is not constant, they are not suitable as input values for training the neural network, so the neural network is trained by converting them into center-of-gravity inputs and median value inputs. This allows the position error to be reduce by the neural network. In addition, different numbers of trained data are used, viz. 50, 100, 200 and 300, and the correlation between the number of data input values and the error is checked. When the training is performed using the neural network, the errors of the center-of-gravity input and median value input are compared. It was found that the greater the number of trained data, the lower the error, and that the error is lower when the median value input is used than when the center-of-gravity input is used.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.14 no.2
• /
• pp.122-131
• /
• 1994

Journal bearings in the rotating machineries are vulnerable to the contamination or the insufficient supply of lubricating oil, which is likely to be the cause of unexpected shutdown or malfunction of these systems. Various destructive and nondestructive testing methods had been used for the reduction of maintenance cost and the operational safety problems due to the accidents related to bearing damages. In this experimental approach, acoustic emission monitoring is employed to the detection of incipient failure caused by intervention of foreign particles most probable in the journal bearing systems. Experimental schedules for the intervention of foreign particles was composed to be more quantitative and systematic than last study in consideration of minimum oil film thickness and particle size. The experiment was conducted under such designed conditions as inserting alumina particles to the lubrication layer in the simulated journal bearing system. Several parameters such as AE rms level, waveform, AE energy distribution and other AE event parameters are used for analysis and characterization of damage source. The results showed that the history of damage was well correlated with the changes of AE rms level and the type of damage source signal can be verified using other informations such as waveform, distributions of AE parameters etc.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.2_2
• /
• pp.307-312
• /
• 2020

This study presents problems and improvement measures for the supply rate of single-alarm detector and fire extinguisher installed in households. Statistics from the NFDS show that 18 percent of all fires and 45 percent of deaths occurred in residential buildings over the past eight years. It was less than 60% that households be equipped rate of basic fire-fighting systems by 2019. In this study, I analyzed the law and statistics of fire to devise a method for fire safety. I proposed that the basic fire-fighting systems is be equipped in households. Like this : First, a free distribution policy for the over 60 years of age and Areas where is fire engine difficult to enter. Second, the policy of adopting safety pay in disaster. Third, the policy of expanding supply through the revision of the Licensed Real Estate Agents Act. Fourth, the policy of self-regulating installation by safety education and set up a data base system. Fifth make a law of household's National Fire Safety Standards.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.12 s.159
• /
• pp.1800-1809
• /
• 2006

The wearable technology takes the concept of clothing over its limits -integrating software, communication devices, and sensors into the garments to enable them to 'think' for the wearer. A dress is no longer just a dress, but a dress as well as a wearable computer interface. This wearable computer network transports the data power and control signals within the wearer's personal space. The purpose of this thesis is to explore the wearable technology from a commercial perspective. On this theme I made a survey and interviewed 20 men and 20 women in London to find out if many people are familiar with the concept of the wearable technology. The main results of this study include: Firstly, according to the survey, people are not familiar with the concept of the wearable technology, and further people thought negatively about the wearable computer rather than positively they worried about hish prices, inappropriate technology and side effects. Secondly, people are especially interested in items related to health and security, so in this area there are huge potential opportunities for the wearable technology, Finally, wearable technology needs to be a simplified set of interactive devices, which are in a user friendly format for marketability because convenience was one of the biggest concern for consumers. Therefore, development of the wearable computer should be promoted not only through computer engineering but also through the connection with human lift.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.3
• /
• pp.129-134
• /
• 2020

Moisture infiltration inside the solar cell module, filling of EVA sheet, melting of the frame seal, and deterioration of power generation performance in the module one year after installation are occurring. Whitening phenomenon, electrode corrosion phenomenon, and dielectric breakdown phenomenon are appearing in solar cell module installed in Korea before 5-7 years, leading to deterioration of power generation performance, and big problems for long-term reliability and long life technology are emerging. Therefore, in order to solve these problems, the development of a micro inverter (MiCrco Inverter Converter, MiC) including the function of securing the durability of the solar cell module and monitoring the aging progress and the solar cell based on the monitoring data from the MiC smart monitoring programs have been proposed to determine the aging of modules. In addition, in order to become a highly efficient solar smart monitoring system through systematic operation management through IT convergence with MiC that has enhanced monitoring function of solar cell module, SoC(System On Chip) in micro inverter is the environment for solar cell module. There is a demand for functions that can detect information in a complex manner and perform communication and control when necessary. Based on these requirements, this paper aims to develop SoC-based low-cost MiC smart photovoltaic system technology.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.18 no.6
• /
• pp.211-221
• /
• 2019

The death toll for every 10,000 cars registered in Korea is 1.4, which is still the lowest among OECD members, and the need for rescue and response systems is emerging. In response, the company is developing a vehicle ICT-based emergency rescue system (e-Call) that can handle accidents such as rapid and accurate life saving by automatically sending accident detection and related information to the central center in the event of a traffic accident. However, ordinary citizens are negative about the installation and cost of e-Call services. To solve these problems, various introduction and operation methods of e-Call were proposed for activation of terminal distribution. In addition, the effect of introducing e-Call was analyzed by predicting the penetration rate of e-Call terminals. Analysis shows that 463 to 926 deaths and 3,335 to 6,66.9 billion won will be saved in 10 years after the introduction of e-Call terminals.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.1
• /
• pp.1-7
• /
• 2008

Today, Korean medical community faces rapid changes in medical environment due to opening of medical market, more emphasis on making profit and introduction of private medical insurance. Therefore, it is apparent that around, major university hospitals, efforts are being made to adapt to such changes by establishing mid to long range strategic plans. We want to keep pace with changing times and diverse demand of patients by introducing state of the art system, utilizing Ubiquitous technologies for improvements. In doing so, we want to distinguish our hospital services from others. However, Hospital Information System that integrates ubiquitous technologies are introduced in limited basis due to problems like standardization and limits on medical use etc. Particularly, problems like absence of tag design suitable for medical environment, compatibility and extension issue with RFID system need to be addressed on application of RFID technologies. In order to solve such problems, this paper implemented RFID tag system, RFID-SIP UA program, location tracking program. This paper provides a comprehensive basic review of RFID and SIP model suggests the evolution direction of further advanced RFID application service. The design of RFID-SIP application offers advance RFID system with drawback and reduction search time of medical object. so there is a improvement of hospital information system in ubiquitous environment.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.5
• /
• pp.378-387
• /
• 2003

Digital watermarking is the technique that embeds invisible signalsincluding owner identification information, specific code, or pattern into multimedia data such as image, video and audio. Watermarking techniques can be classified into two groups; robust watermarking and fragile(semi-fragile) watermarking. The main purpose of the robust watermarking is the protection of copyright, whereas fragile(semi-fragile) watermarking prevents image or video data from illegal modifications. To achieve this goal watermark should survive from unintentional modifications such as random noise or compression, but it should be fragile for malicious manipulations. In this paper, an invertible semi-fragile watermarkingalgorithm for authentication and detection of manipulated location in MPEG-2 bit-stream is proposed. The proposed algorithm embeds two kinds of watermarks, which are embedded into quantized DCT coefficients. So it can be applied directly to the compressed bit-stream. The first watermark is used for authentication of video data. The second one is used for detection of malicious manipulations. It can distinguish transcodingin bit-stream domain from malicious manipulation and detect the block-wise locations of manipulations in video data. Also, since the proposed algorithm has an invertible property, recovering original video data is possible if the watermarked video is authentic.

• Korean Security Journal
• /
• no.11
• /
• pp.37-60
• /
• 2006

The area of security service has been maintaining the high growth curve annually by improving security consciousness from increase of the income and the progress of public services's level by the accomplishment in the info-communication field, recently the demand for unmanned security system is extended form commercial purposes into public offices and individual's houses. In addition to, the possible distance of offering services is scheduled to magnify. At the period when security company's influence has been becoming significant, the injustice transaction is the serious factor which obstructs the development of security companies. Therefore, it is urgent thing to devise counterplans to extirpate injustice transactions. There are the legalistic approaches of the breakthroughs against injustice transactions. One thing is settling the standard of the judgment and the other is renovating the provision of injustice transactions. Utilizing the principles of the fair competitions and importing self-obedience programs within the range of trade actions which is permitted by law, acted as the system approach. Moreover, there are such three things which can achieve mutual balances as establishing the range of the permitted action toward business corporations, applying spontaneously the fair competition principles and introducing the system of standard agreements. Gong further, this can establish order of security service areas and control them. Besides, it is possible for every organizations to make and operate the system appropriately by importing the self-observance system.

• Journal of Science and Technology Studies
• /
• v.18 no.1
• /
• pp.177-217
• /
• 2018

This study examines the case of living lab applied in the R&D initiatives for solving societal problems and challenges. It discusses how to use the living lab in national R&D projects. The analyzed cases are 'Develop portable fundus camera for eye disease screening test to resolve health inequalities' and 'Auto-sensing integrated system development in rural pedestrian crosswalk'. As a result of the analysis, both cases were designed as a user participatory R&D structure by utilizing living lab. In other words, living lab has operated as a system that evolves technology-products-services into an infrastructure. It can realize final demand specification, product, service improvement and demonstration through continuous interaction of end users. As a result of the case analysis, the following policy tasks can be derived. First, living lab is a new concept and it is in the early stage of implementation in Korea. Therefore, it is necessary to monitor and evaluate living lab experiments and build suitable models for Korean society by sharing cases and achievements. Second, the strategic niche management are necessary for the introduction of living lab. Third, living lab can be used as a tool to transform the existing technology acquisition centered innovation policy to the policy for customer needs and problem solving. Fourth, there is a need for flexibility and adaptability in strategy and system to correct errors that appear in the living lab processes.