• Title/Summary/Keyword: 감수시간

Search Result 155, Processing Time 0.025 seconds

Development of Slow-release Compound Fertilizer Used Urea-resin for Upland Crop -II. Effect of Slow-release Compound Fertilizer on Chinese Cabage (요소수지(尿素樹脂)를 이용(利用)한 전작용완효성(田作用緩效性) 복비개발(複肥開發) -II. 배추에 대(對)한 완효성(緩效性) 복비효과)

  • Seong, Ki-Seog;Kim, Bok-Jin;Shin, Jae-Sung
    • Korean Journal of Soil Science and Fertilizer
    • /
    • v.24 no.1
    • /
    • pp.50-54
    • /
    • 1991
  • This study was conducted to evaluate the effect of five newly developed slow-release compound fertilizer varying urea/formaldehyde mole ratios on chinese cabbage against the checked plot of straight fertilizer. The chinese cabbage was obtained the highest yield in the product V which was 1.0 mole ratio of urea/formaldehyde adding with 6.7% urea resin, however, it was lowest in the product VII which the lowest mole ratio of urea/formaldehyde and the highest amount of the resin added. The appropriate product with one basal application for chinese cabbage should be one with 76.1 % of T-N dissolution in water after 24hrs and 71.7 % of T-N dissolution in soil 100 days after treatment. The total nitrogen content of the harvest plant in the product plot was lower compared to the checked plot of N P K and the available soil phosphrous after harvest was higher than that of the checked.

  • PDF

A Robust TDMA Frame Structure and Initial Synchronization in Satellite Communication (위성통신을 위한 강인한 TDMA Frame 구조 및 초기동기 기법)

  • Ko, Dong-Kuk;Yoon, Won-Sik
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.16 no.8
    • /
    • pp.1631-1641
    • /
    • 2012
  • A TDMA system in satellite communication has been utilized. Especially DVB-S2 was standardized and now operated in satellite broadcasting system. In this paper, we propose a TDMA frame structure appropriate for special purpose which has the good reliablilty in a poor RF environment even if frequency efficiency is decreased. TDMA frame duration is 12 seconds which is long duration in comparison with general TDMA system with several ms. Designing the frame structure, time and frequency shift in single frame duration are considered. Simulation results show that the proposed frame structure and synchronization method has robust synchronization performance when the terminal is even in low SNR as well as 25 kHz frequency offsets.

Effect of Carbon Amino Silica Black Contained Superplasticizer on the Engineering Properties and Chromaticity of Black Color Concrete (카본 아미노 실리카 블랙 기반 고성능 감수제가 블랙 컬러 콘크리트의 공학적 특성 및 발색도에 미치는 영향)

  • Han, Min-Cheol;Hong, Seok-Min
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.1 no.3
    • /
    • pp.181-188
    • /
    • 2013
  • This paper is to investigate experimentally an effect of carbon amino silica black-superplasticizer(CASB-SP)on the engineering properties and chromaticity of black color concrete with 0.45 of W/C(water to cement). CASB-SP and carbon black were applied for pigment of the concrete. To prevent efflorescence of concrete, four different water repellent agents were also applied. As results, it was found that use of CASB-SP increased the slump and air contents. Furthermore, the use of CASB-SP increased the compressive strength. As CASB-SP dosages increased, chromaticity was well developed. For the effect of water repellent agent, the use of epoxy type was effective for protection from efflorescence. Based on test results, it was evaluated that 0.5% of CASB-SP effectively improve the concrete quality as well as enhance the chromaticity with proper dosage.

Effects of Sulfur Dioxide on Growth and Yield of Eight Barley(Hordeum vulgare L.) Cultivars (아황산가스 처리가 몇가지 보리 품종들의 생육 및 수량에 미치는 영향)

  • Park, Ki Sun;Ku, Ja Hyeong
    • Korean Journal of Agricultural Science
    • /
    • v.23 no.1
    • /
    • pp.131-137
    • /
    • 1996
  • The objectives of this research were to determine the effect of sulfur dioxide on the growth and yield reduction of 8 Korean barley cultivars. To achieve these, barley seeds were planted in pots, then those were exposed to 1.0 ppm $SO_2$ for 6 h in a closed-top field chamber at tillering and heading stage. Foliar injury and reduction of culm and awn length were more severe when barley cultivars were exposed to $SO_2$ at tillering stage than those at heading stage. Durubori was most susceptible to $SO_2$ among cultivars tested. However, number of node and length of spike were not affeced by $SO_2$ exposure in ail cultivars. Number of spike, and grains, and weights of 1,000 grains were significantly reduced by $SO_2$ exposure at tillering stage. The reduction rates of yield at tillering stage exposure were 22% and 47% in Dongbori and Durubori, respectively. Dongbori #2 showed the most tolerant to sulfur dioxide among 8 cultivars.

  • PDF

Application of Hyperspectral Imaging System to Analyze Vascular Alteration for Preclinical Models (전임상 혈관분석을 위한 초분광 이미징 시스템의 활용)

  • Choe, Se-Woon;Woo, Young Woon
    • Journal of the Korea Society of Computer and Information
    • /
    • v.20 no.4
    • /
    • pp.69-76
    • /
    • 2015
  • We present microscopy based hyperspectral imaging system that successively shows high spatial (micrometer) and temporal resolutions (milisecond), and acquired pseudocolor hemoglobin saturation map a result of various image processing techniques can provide additional information such as oxygen transport, abnormal vascularity and therapeutic effects besides structural and physiological measurements in various diseases. To increase understanding of vascular defects several optical methods of imaging for preclinical/clinical assessment have been developed so far. However, they have some limitations for outcoming resolution and user satisfaction level compared to its cost. A hyperspectral imaging system has shown a wide range of vascular characteristics associated with hypervascularity, aberrant angiogenesis or abnormal vascular remodeling in many diseases. This vascular characteristic is considered as a key component to diagnose and detect a type of disease as evidenced by them.

Flooding Injury of Rice Plant according to Growing Stages and Yield Compensating Ability by Uppernode Tillering (벼 관수에 따른 생육단계별 피해 및 고위절 분얼 이삭에 의한 수량보상력)

  • 강양순;양의석;이성환
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.33 no.2
    • /
    • pp.195-200
    • /
    • 1988
  • This experiment was carried out to evaluate the flooding injury and yield compensating ability by uppernode tillers formed during the recovery periods. Rice plants grown in experimental field transplanted on 1st, June were completely flooded for 3 days by the artificial flooding device in each different growth stage such as middle tillering stage (20 days after transplanting), young panicle formation stage, meiotic stage and heading stage. And the farmer's rice fields which had various transplanting dates were completely flooded for 3 days by typhoon 'Thelma' from 16th to 18th, July, 1987. Percent of dead leaves and yield reduction of rice in experimental field flooded at the different growth stages were resulted that the earlier growth stages were the lower damage because of the low temperature in the earlier growth stage, but it showed opposite tendency in farmer's rice field flooded in high temperature season by typhoon 'Thelma'. Rice yield compensating ability attained to 66% of check plot yield was greatly depend on uppernode panicles induced after damage of original young panicles. Uppernode panicle produced 236 kg per 10a in polished rice by securing 690$^{\circ}C$ of accumulated mean temperature and 210 hours of sunshine during the ripening periods when headed up to 15th of September.

  • PDF

Development of a Mouse for Alternative Computer Access Using Smart Device (스마트기기를 이용한 컴퓨터 대체접근 마우스 개발)

  • Jang, U.H.;Hong, W.K.;Kim, C.G.;Song, B.S.
    • Journal of rehabilitation welfare engineering & assistive technology
    • /
    • v.8 no.1
    • /
    • pp.47-55
    • /
    • 2014
  • Almost of alternate computer access devices which assist people with disabilities to utilize the computer connected to computer by some cables or installed in as a S/W program. These devices have some spatial limitations to the people with disabilities, it can't guarantee the free and diverse access to the computer. For these reasons, in this paper, an Android-based mouse program for alternative computer access was developed. A people with physical disabilities who has some limitation of hand movements can use it in anywhere and anytime using only the fine motor skill of the upper limbs. The developed device recognizes the user's point touch and transforms it into the location of mouse cursor. The location information transferred to the computer via Bluetooth communication module equipped in smart devices. Also the group scanning method which can reduce the user's fatigue degree was employed and click, double click, drag & drop functions by hand's movements were equipped. The developed device will help the people with disabilities to use computer with brief touch and convenient operation without spatial limitation.

  • PDF

Test Generation for Multiple Line Affecting Crosstalk Effect (다중 전송선에 영향을 받는 Crosstalk 잡음을 위한 테스트 생성)

  • Lee, Young-Gyun;Yang, Sun-Woong;Kim, Moon-Joon;Chang, Hoon
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.39 no.9
    • /
    • pp.28-36
    • /
    • 2002
  • As cross-coupling capacitance generated in transmission line has been an important issue in VLSI world, a couple of ATPG algorithms has been proposed. However they were studied only for a simple single-line effect problem, so it cost so much time for an unsatisfying test generation efficiency. In this paper, we studied a noise model for multiple affected lines and generated test patterns in a short time. This paper proposes a crosstalk model affected by multiple tranmission lines and implemented an ATPG algorithm for detection of crosstalk noise faults. We modeled the crosstalk noise by multiple transmission line and made a truth table for this. We implemented an ATPG algorithm based on PODEM and revealed the results.

The Impact of Characteristic Velocities Considering Geomorphological Dispersion on Shape of Instantaneous Unit Hydrograph (지형학적 분산을 고려한 특성유속이 순간단위도 형상에 미치는 영향)

  • Choi, Yong-Joon;Kim, Joo-Cheol;Hwang, Man-Ha
    • Journal of Korea Water Resources Association
    • /
    • v.43 no.4
    • /
    • pp.399-408
    • /
    • 2010
  • The sensitivity of Nash model parameters is analyzed about characteristic velocities considering geomorphological dispersion in the present study. And changing shape of IUH compared and analyzed as variation of characteristic velocities through numerical experiment. Application watersheds are selected 4 subwatersheds which are located at main stream of Bocheong basin. The mean and variance of hillslope and stream path length are estimated in each watershed with GIS. And Nash model parameters are estimated with moments of path lengths and characteristic velocities. The changing trend about IUH which is derived Nash model parameters are compared as variation of characteristic velocities. The Major results of this study are summarized as follows. The Nash model parameters sensitively present changes about hillslope characteristic velocity. And the effect of the peak discharge and shape of recession in IUH dominate with hillslope's characteristic velocity, the effect of the peak time and shape of ascension in IUH dominate with channel's characteristic velocity.

Reduction of Metal Artifact by Using VAT-SEMAC in MRI (VAT-SEMAC을 이용한 보철물에 의한 허상 감소)

  • Kim, Hyung-Tae;Lim, Jong-Nam;Chon, Kwon Su
    • Journal of the Korean Society of Radiology
    • /
    • v.13 no.2
    • /
    • pp.227-232
    • /
    • 2019
  • MRI examination for patients with metal objects has in poor image quality. Metallic implants can result in poor image because magnetic susceptibility causes signal loss and distortion and makes poor imaging, which is called magnetic susceptibility artifact or metal artifact. There are several approaches to reduce metal artifacts. In this study, we study the reduction of metal artifact by VAT and SEMAC techniques. A metal implant used for orthopedic surgery was attached to the phatom and the distortion caused by the artifact was measured under T1WI and T2WI protocols. Several techniques of VAT only and VAT and SEMAC for the reduction of metal artifact were compared. The metal artifact showed a reduction of at least 8% to a maximum of 26% in the VAT-SEMAC. The VAT-SEMAC technique can be applied to patients with orthopedic implants to improve image quality. If scan time and image quality are simultaneously considered in VAT-SEMAC technique, metal artifact will be reduced in clinical practice.