• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.3
• /
• pp.248-257
• /
• 2016

Recently, researches on the free-piston Stirling engines(FPSEs) are actively investigated. FPSEs have merits in its light weight, simple structure, and little need for maintenance, thus becoming a promising solution for the power conversion of renewable energy and waste heat recycle. This paper presents the methodology that estimates damping coefficients using analytical models of linear and nonlinear dynamics for FPSEs, and validates the methodology by comparing with existing experimental results. The analysis model predicts an operable range of linear damping coefficients forming limit cycles by using the root locus, and time responses obtained by numerical integration determines nonlinear damping coefficients. The model predictions are compared with experimental results of the well-known FPSE B-10B. We also investigate the damping characteristics regarding heater temperatures and power piston motions.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.5
• /
• pp.402-411
• /
• 2000

This study investigates the method to measure the viscoelastic properties of asphalt cement, one of the viscoelastic materials, using the ultrasound. The wave speed and attenuation were measured from $-20^{\circ}C$ to $60^{\circ}C$ at the frequency of 2.25MHz. Then, the storage and loss longitudinal moduli, loss tangent storage and loss longitudinal compliances were found depending on the temperatures based on the linear viscoelastic theory. Stress relaxation, creep, and viscosity were predicted using Maxwell and Voigt-Kelvin viscoelastic models. The validity of superposition principle and shift factor were verified by comparing the present results to the data reported in the literatures.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.332-335
• /
• 2014

Applying damping sheets or dampers (dynamic or mass) can reduce noise from vibrating structure as well as vibration. However, this approach requires increases of weight and cost. If one can reduce structural noise by only modifying the structural shape, which would be the best practice. It is natural that the noise characteristics change when the structure is modified, but the recent experiment on the sunroof frame showed that the modification of the frame beads results in change of the structural damping, so that the corresponding noise can be reduced. In this context, the reason why the structural damping and the related noise upon an impact excitation is changed is theoretically investigated. The change of dynamic and damping characteristics of the strip panels when their shapes are modified is experimentally found and it is shown that such behaviours can be predicted by computer simulation. Some experimental specimen, mainly strip-type panels, are examined for the numerical verification, and especially damping ratios are investigated.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2011.04a
• /
• pp.71-74
• /
• 2011

최근 국제적으로 지진 발생 규모가 증대하고 있으며, 우리나라를 비롯한 많은 나라에서 구조물 및 주요 시설물에 대한 내진설계에 관심이 증대되고 있다. 지진방재는 건물자체의 안전성뿐만 아니라 내부설비 및 소장품에 대한 안전성까지 종합적으로 검토되어야 하며 이를 위한 대책이 필요한 실정이다. 본 연구의 주요목적은 예측 불가한 자연재해인 지진에 대해 일반적인 면진성능을 갖는 기초격리장치로서의 기능을 충실히 수행할 수 있는지를 확인하기 위하여 면진장치를 사용한 구조물의 면진효과를 검증하는 것이다. 또한 설계된 스프링의 탄성계수에 따른 실제 지진 시 응답의 차이를 알아보기 위하여 공진실험 및 진동대 실험을 실시하여 면진테이블 시스템의 면진성능을 평가하였다. 진동대 실험은 미국 "NEBS Requirements"에서 규정하는 요구응답스펙트럼에 상응하는 임의 지진파를 적용하였고 각각 x축과 z축 가진 후, x-y-z 축을 동시에 가진하여 수행하였다. 시험응답스펙트럼(Test Response Spectrum)은 요구응답스펙트럼(RRS)에 포락하도록 시험하여 최대가속도는 x축 방향 가진 시 90%의 감쇠효과가 나타났으며, 3축 방향 가진 시 x축 방향은 58%, y축 방향은 31%의 감쇠효과가 나타났다. 최대상대변위는 설계스트로크 140mm에 대하여 최대 85.54mm의 변위가 발생하여 안정적인 거동을 나타내었다. 본 연구에서 제안한 면진테이블 시스템은 중요 첨단장비 및 문화재 등의 전도 및 파괴를 방지하는 데 효과적일 것으로 판단된다.

• Computational Structural Engineering
• /
• v.10 no.2
• /
• pp.203-211
• /
• 1997

In the design of tall building system, the wind loading can be more dominant factor than earthquake loading, and thus, it is important to check the stability and human comfort against wind. Experimental wind tunnel test is usually performed to predict wind behavior of a tall building, however, the test is not cost-effective in the preliminary stage for various structural models of tall building systems. In this regard, the study is focused on the numerical wind analysis of the tall building with and without tuned mass dampers based on the three dimensional model of wind loads and building behavior. As a numerical result, an asymmetrical 102-story tall building is presented to show the results of root mean squares of build responses with and without tuned mass dampers.

• Journal of Ocean Engineering and Technology
• /
• v.26 no.2
• /
• pp.14-19
• /
• 2012

There are insufficient data to consider the effect zone for the marine life of coastal fisheries, because no standard has been defined for the sound level of marine life. In this study, equations for distance attenuation were used to determine the effect zone for oceanic noises. A reference noise level was divided into 4 parts to consider the characteristics of the fishes, and the effect zone of each reference noise level was determined. To increase the reliability of the effect scope, approximately 100 repetitions of blasting work split into several parts by the boring depth, the sound level of the source caused by an increase in weight, and the effect zone were calculated using the prediction equation. According to the prediction, the maximum distance of the effect zone was 4.92 km.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.7 no.1
• /
• pp.108-115
• /
• 1995

An efficient model for the dynamic analysis of caisson breakwaters under impulsive wave loadings is presented. The caisson structure is. regarded as a rigid body, and the rubble mound foundation is idealized as virtual added masses, springs, and dampers using the elastic half-space theory. The frequency-dependent hydrodynamic added mass and damping coefficients are considered by using the time memory functions and added mass at infinite frequency. To simulate the permanent sliding phenomenon of the caisson, the horizontal spring is modeled as a nonlinear spring with plastic behaviors. Comparisons with experimental results show that the present model gives fairly good results. Sensitivity analysis is performed for the relevant parameters affecting the dynamic responses of a caisson breakwater. Numerical experiments are also carried out to investigate the applicability to the prediction of permanent sliding distance and critical weight of the caisson.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.277-277
• /
• 2012

국립기상연구소(National Institute of Meteorological Research; NIMR)는 기상청 이중편파 레이더 현업운영에 대비하여 2009년 X-band 연구용 이중편파 레이더를 도입하였고, 편파변수의 산출과 대기수상체 분류를 포함한 강수추정 등의 효용 가능성에 대한 연구를 지난 2년간 수행하고 있다. 이중편파 레이더는 반사도( )뿐만 아니라 차등반사도($Z_R$), 비차등 위상($K_{DP}$), 상관계수($_v$)등의 편파 변수의 산출로 강우감쇠보정과 기상에코-비기상의 에코(ground clutter, insects, birds, chaff)의 구별이 가능하다. 이러한 장점들을 이용해 레이더 자료품질 개선과 정량적 강수추정의 상당한 개선에 도움이 된다. 본 연구에서는 강수추정 관계식 R-Z, 감쇠 보정된 R-Z, R-$K_{DP}$ 관계식을 이용하여 레이더 관측 반경 내에 존재 하는 81개의 지상 우량계 자료와 강수량 추정의 정확도 비교 검증을 실시하였다. 그리고 Fuzzy logic 기법을 이용한 대기수상체 분류 알고리즘을 사용하였고 관측사례는 2011년 수도권 관측을 통해 강설/강수 에코 구별과 우박에코 사례를 분석하였다. 본 연구를 통해 이중 편파 레이더에서 산출된 고품질의 레이더기상자료를 기반으로 현업 예보지원 및 정량적 강우예측 향상에도 기여할 것으로 사료된다.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.3
• /
• pp.90-96
• /
• 1995

A new method for autoregressive parameter estimation from noisy observation sequence is presented. This method, termed the AP method, is a result of an attempt to make use of the adaptive predictor which is a simple and reliable way of parameter estimation. It is shown theoretically that, for noisy input, the parameter vector computed from the prediction sequence is closer to that of the original sequence than the noisy input sequence is, under the spectral distortion criterion. Simulation results with the Kalman filter as a noise reduction filter and real speech data supported the theory. Roughly speaking, the performance of the parameter set obtained by the AP method is better than noisy one but worse than the EM iteration results. When the simplicity is considered, it could provide a useful alternative to more complicated parameter estimation methods in some applications.

• Tunnel and Underground Space
• /
• v.22 no.1
• /
• pp.54-59
• /
• 2012

Deformation of Lead plate blast pressure meter were measured after they were exposed to surface blasting. Blasting pressure was determined by comparing the data with calibration graph which was drawn from the laboratory experiments with gas gun of Hopkinson bar tester. The results were compared with calculated values from the equations of CONWEP (Conventional Weapons Effects Program) and DDESB (Department of Defence Explosives Safety Board). Measured values were lower than calculated values in near field. Gradual decaying tendency of the pressure was observed. It means that estimated blasting pressure of very near field with theoretical equations can be uncertain.