• Journal of the Korean Society for Railway
• /
• v.16 no.1
• /
• pp.20-25
• /
• 2013

The frame elements of modern high speed trains are typically fabricated with extruded aluminum panels. However, the sound transmission loss (STL) of extruded aluminum panels is less satisfactory than flat panels with the same surface density. This study proposes a method for prediction of the sound transmission loss of extruded aluminum panels using finite element analysis. The panel is modeled by finite element analysis, and the STL is calculated using a measure of Sommerfeld radiation at the specimen surface, boundary conditions, and the internal loss factor of the material. In order to verify the validity of the predicted value, intensity transmission loss was measured on the aluminum specimen according to ASTM E2249-02. The proposed method of analysis will be utilized to predict the sound insulation performance of extruded aluminum panels for railway vehicles in the design stage, and to establish measures for their improvement.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.10
• /
• pp.985-993
• /
• 2015

Free-piston Stirling engines (FPSEs) have attracted much attention in the renewable energy field as a key device in the conversion from thermal to mechanical energy, and in the recycling of waste energy. Traditional Stirling engines consist of two pistons that are connected by a mechanical link, while FPSEs are formed as a vibration system by connecting each piston to a spring without a physical link. To ensure the correct design and control of operations, this requires elaborate dynamic-performance predictions. In this paper, we present the performance-prediction methodology using a linear and nonlinear dynamic analytical model considering the external load of FPSEs. We perform linear analyses to predict the operating point of the engine using the root locus technique. Using nonlinear analysis, we also predict the amplitude of pistons by performing numerical integration considering both the linear and nonlinear damping terms of the external load. We utilize the predicted dynamic behavior to predict the engine performance. In addition, we compare the experiment results and existing model predictions for RE-1000 to verify the reliability of the analytical model.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.1
• /
• pp.51-61
• /
• 2014

It is necessary to perform a dynamic analysis to numerically evaluate the effect of blasting on nearby facilities. The blast load time history, which cannot be directly measured, is most often determined from empirical equation. The load has to be adjusted to account for various factors influencing the load and the frequency, but there is not a clear guideline on how to adjust the load. In this study, a series of 2D dynamic numerical analyses that simulates a closely monitored test blasting is performed, from which the blast load that matches the measured vibrations are derived. In the analyses, it is assumed that the hole generated by the blasting is in the form of a circle, and the load was applied normally to the wall of the opening. Special attention was given in selecting the damping ratio for the ground, since it has important influence on the wave propagation and attenuation characteristics of the blast induce waves. The damping ratio was selected such that it matches favorably with the attenuation curve of the measurement. The analyses demonstrate that the empirical blast load widely used in practice highly overstimates the vibration since it does not account for the energy loss due to rock fragmentation. If the empirical load is used without proper adjustment, the numerical analysis may seriously overstimate the predicted vibration, and thus has to be reduced in the analysis.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.5
• /
• pp.403-409
• /
• 2015

In this paper, we propose Packet Loss Concealment (PLC) method using adaptive signal scale estimation for performance improvement of G.711 PLC. The conventional method controls a gain using 20 % attenuation factor when continuous loss occurs. However, this method lead to deterioration because that don't consider the change of signal. So, we propose gain control by adaptive signal scale estimation through before and after frame information using Least Mean Square (LMS) predictor. Performance evaluation of proposed algorithm is presented through Perceptual Evaluation of Speech Quality (PESQ) evaulation.

• Journal of KSNVE
• /
• v.7 no.4
• /
• pp.597-604
• /
• 1997

Ground vibrations induced from railroad were measured to get the basic data that can be usde to prepare countermeasures for solving environmental vibration problems. Vibration levels were measured simultaneously at three points in double distances from railroad. These data were analuzed with the kinds of trains, media to understand the magnitudes and characteristics of distance attenuation of railroad vibrations.

• The Journal of the Acoustical Society of Korea
• /
• v.10 no.5
• /
• pp.37-45
• /
• 1991

일반 소형 승용차의 고속 주행시 발생하는 진동 중 조향휠의 원주방향의 진동인 shimmy 현상을 연구하였다. Shimmy 현상은 쾌적한 차량 설계단계에서 예측할 수 있고 그 원인을 추정할 수 있도록 조 향계의 모델링 및 이론해석을 하였으며 실험결과치와의 비교검토를 통하여 모델링에 대한 타당성을 검 증하였다. 검증된 모델링을 이용하여 조향계를 구성하는 각 부재의 감쇠, 강성, 타이어의 트레일 및 stabilizer bar 의 강성등의 변화가 조향휠 진동에 미치는 영향을 고찰하였다. 특히 shimmy 현상이 타이 어의 편마모등에 의한 unbalance mass에 얼마나 민감한가를 실험 및 이론적인 해석을 통하여 고찰하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.6
• /
• pp.824-832
• /
• 1998

The significant additional path loss is caused by scattering, diffraction, and attenuation of propagation. Most of the wave propagation models for rural areas mainly have considered the influence of topography but ignored the effects due to land usage. The goal of this paper is development of the field strength prediction program for Cheju which is used the contour map and the effects due to land usage. In oder to classify the propagation path and divide the environment of land, data of the terrain and the land-cover are formed into a pixel. Two-ray model is transformed into equivalent model by the predicted reflection coefficient and the slope of terrain. For non line of sight, the additional loss is determined by quantitative analysis. The result show good accord and the wave propagation model program can be applied to predicted the service region in rural area of Cheju.

• Journal of KSNVE
• /
• v.7 no.4
• /
• pp.621-629
• /
• 1997

For computer aided design and costruction of low noisy power plants, indoor and outdoor noise prediction program has been developed. The program utilizes the predefined data of noise sources and building materials and has the faculty to estimate the source level using the empirical formula in case of the measured data not being available. In the noise prediction, the mutual noise propagation between indoor and outdoor sites are considered. The outdoor noise source in the calculation of geometric divergence effects is modelled as the omni-directional finite line or planar source according to the source geometry and the receiving points. Outdoor noise prediction is carried out to consider the diffraction effect due to plant structures as well as the attenuation effect due to atmospheric absorption and soft ground. The results of indoor and outdoor noise prediction for a recently constructed diesel engine power plant show good agreement with the measured.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06c
• /
• pp.421-426
• /
• 1998

국악전용 공연장으로 지어진 국립국악 소극장의 음향 특성을 실내 음선도, 암소음, 잔향시간 및 음압분포에 의해 분석.평가하였다. 연구결과 무대 앞부분과 객석모서리에서 음선경로차가 17m 이상으로 나타나 회주공조현상의 발생이 예측되며 남부순환도로와 인접하여 소극장내에 높은 암소음이 측정되었다. 잔향시간의 측정결과 과다한 실내 흡음력으로 인해 공석시에 계획값 보다 0.8초 정도가 짧으며 이는 관객입장시 더욱 악화될 것이 예측되어 1석당 실용적을 증가와 실내 흡음력을 가능한 줄일 필요가 있다. 음압레벨은 음악당 전 객석에서 고른 음압분포가 보이고 있으나 무대 음원에서 객석전열 사이에 초기 음압감쇠가 크게 나타나 무대주변의 음압 보강이 요구된다.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.165-166
• /
• 2015

본 논문에서는 제주풍력단지에 대한 측정 데이터(measured wind power outputs)를 기반으로 제주 실측 풍력데이터를 이용하여 공간적인 상관관계 분석을 수행하고, 상관관계 감쇠거리(CDD; Correlation Decay Distance)를 적용하여 새로운 풍력발전단지에 대한 공간모델 적용 시 기존 풍력발전단지의 포함여부(set 또는 subset)를 결정하는 기준(Threshold)으로 활용하고자 한다. 이를 통해 풍력발전출력 예측에 공간모델을 적용하고, 정확도를 향상시키는 방안을 연구하고자한다.