• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.12 s.103
• /
• pp.1186-1193
• /
• 2005

In this paper, a new 3 dB branch line hybrid using asymmetric spiral-shaped defected ground structure(DGS) microstrip is proposed. The proposed branch line hybrid suppresses the 2nd and the 3rd harmonic component effectively. Also a DGS $\lambda$/4 bias line that can suppress high frequency harmonics as well as low frequency intermodulation component is proposed. With the harmonic termination tuner using the proposed hybrid and the harmonic blocking bias line, the 2nd and the 3rd harmonic components of the fabricated amplifier that operated in IMT-2000 basestation transmitting band were suppressed up 25 dB and 27 dB, respectively. The proposed harmonic load-pull setup of amplifier is more easily accomplished with proposed circuits than the previous.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.12
• /
• pp.1599-1606
• /
• 2011

It is possible to study the load characteristics of full-scale hingeless rotor with the changing of physical smallscaled configurations such as rectangular and paddle blades, and metal and composite hubs. In this study, a static test, and a ground and wind-tunnel test were carried out using small-scale rotor models. The static test was carried out to confirm structural stiffness, characteristics of inertia, natural frequency, and damping ratio of rotors, and the ground and wind-tunnel test was carried out to confirm the stability and aerodynamic characteristics under hovering and forward flight conditions. According to the test results, the vertical load in the case of a combination of a small composite hub with paddle blades was higher than that in the case of a metal hub with paddle blades at same condition. Further, it was confirmed that the restraint of the combination of composite hub can be more flexible than the metal hub for the motion of paddle blades.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.8
• /
• pp.93-97
• /
• 2004

Since powerline for powerline communications (PLC) is designed for supplying electric power using 60 Hz wave, they will have different electrical behaviors for high data rate PLC whose bandwidth is allocated between 1 MHz and 30 MHz. Thus, it is necessary to investigate the different properties in this frequency bandwidth for the high data rate PLC. In this paper, low voltage (220V) powerline impedance for indoor high data rate PLC in between 1 MHz and 30 MHz is measured. For measurement a low voltage coupling unit is made and a vector network analyzer is used. A T-equivalent circuit of the low voltage coupling unit is obtained and then powerline impedance is derived by measuring the reflection coefficient of the total powerline network. With the method proposed, impedance is measured in case of a general korean apartment and its property is analyzed. Measurement shows that the average impedance is about 100Ω.

• The Journal of Information Technology
• /
• v.7 no.3
• /
• pp.37-45
• /
• 2004

The representative communication method which is applied in the low-speed power line communication modem with 60bps is single carrier method. It has been used mainly for the control. The single carrier method is very sensitive to a power line communication channel environment. Specially, the severe attenuation of the transmission signal according to the notch characteristics of channel becomes the main cause of communication error. Domestic power line channel environment has this notable feature. In this paper, we implemented the low-speed power line communication system which used the chirp signal method to be strong in notch and noise characteristics. In this research, we proposed the method which transmits 1- '1 Unit symbol Chirp signal' with a 100${\mu}s$ time within 1ms for 1 bit. Also it applied for the Convolution code for an error correction and the Manchester code for a collision perception and an error detection. It used the method which uses the bit correlator for signal detection in the receiver parts. We confirmed that the communication method of the chirp method has a excellent performance compared to single carrier methods with a result of experiment of the low-speed power line communication system with the 60bps.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.7
• /
• pp.1032-1039
• /
• 2022

In this paper, we designed and implemented a cavity bandpass filter combined with a cross-coupling equalizer structure to enhance Group delay for 5G mobile network repeater, which can replace the SAW (Surface Acoustic Wave) type bandwidth filter used in the existing mobile communication system. Using the 3D EM simulation tool (HFSS), the resonance frequency, the coupling coefficient between resonators, and external quality coefficient between resonators were calculated. Based on this, a 12th bandpass filter was constructed to have attenuation characteristics of more than 20dB at the edge end of both sides of the band with a metal cavity structure with a frequency band of 3500MHz to 3600MHz and bandwidth of 97.85MHz. The designed bandpass filter satisfies the group delay time requirement for the 5G mobile communication standard and the in-band and out-band frequency responses.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.240-240
• /
• 2020

강우 시 우수관로 내부의 수리 거동(유속, 수위)에 영향을 미치는 대표적인 매개변수는 관로의 조도계수와 손실계수 등이 있다. 이 중 조도계수는 관로 내부의 퇴적 및 협잡물로 인한 조도높이 변화에 따른 관로 내의 수리학적 거동을 평가할 수 있는 매개변수이며 손실계수는 관로의 확대, 축소, 만곡 등에 의한 에너지 감쇄 효과에 따른 관로 내 수리학적 변화를 평가할 수 있는 매개변수이다. 본 연구에서는 서울시 주요 배수구역에 대해 관로 조도계수 및 손실계수 변화에 따른 수위, 유속 변동성을 SWMM으로 분석하였다. 연구에 적용한 대상 배수구역은 반포 02 (방배1), 안양천 13 (봉천1), 성내 05 (길동), 안양천 11(신림4), 반포 03 (방배2), 안양천 01 (오류1), 성내 03 (천호)로 총 7개 배수구역이다. 모형수행을 위한 조건으로 조도계수는 0.015 ~ 0.120 구간에 대해 0.003 단위로 증가시키며 총 12개 CASE를 적용하였으며 손실계수는 0.0 ~ 0.5 구간에 대해 0.1 단위로 총 6개 CASE를 적용하였다. 관로 수리특성에 따른 수심, 유속의 변화량 분석 결과는 관로 및 유역의 크기별로 변화의 폭이 매우 크므로 상자-수염그림(Box-whisker plot) 이용하여 중간값의 변화 정도를 검토하였다. 조도계수 증가에 따른 수심증가, 유속 감소치의 중간값을 분석한 결과 조도계수가 0.013에서 0.034로 증가 시 수심은 40.6% 증가하고 유속은 47.4% 감소하는 것으로 검토되었다(그림 1, 2). 한편, 손실계수 증가에 따른 수심증가, 유속 감소치의 중간값을 분석한 결과 조도계수가 0.0에서 1.6으로 증가시 수심은 15.7% 증가하고 유속은 15.0% 감소하는 것으로 검토되었다. 이상과 같은 연구의 성과는 우수관로 내부의 다양한 여건 변화가 강우 시 관로 내 수리특성에 미치는 영향을 판단하기 위한 기초 자료로 활용할 수 있으며 향후, 우수관로 모니터링 결과와 연계하여 유지관리 방안 수립에 활용할 수 있을 것으로 판단된다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.4B
• /
• pp.788-795
• /
• 2000

Scattered look-ahead pipelining method can be efficiently used for high sample rate or low-power applications of digital recursive filters. Although the pipelined filters are guaranteed to be stable by this method, these filters suffer from large round off noise when the poles are crowed within some critical regions. To avoid this problem, a low-noise implementation technique was proposed using constrained Remez exchange algorithm. By the constrained filter design approach, the desired filter spectrum is satisfied while some of the pole angles are constrained to avoid pole crowding within critical regions. In the proposed approach, to obtain improved spectrum characteristics or better round off noise properties, the radius of the angle-constrained pole is optimized depending on the direction of the pole movement.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.10 no.2
• /
• pp.177-184
• /
• 2008

In this study, in order to reduce appeals regarding vibration and noise from blasts, the optimum delay-time of the electronic detonator, which can minimize blast vibration, is found through blast-waveform composition and blasting simulation, and we have developed the full-face Sequential Blasting Method based on the studies of damping properties of full-face section blasting. The optimum delay-time of the electronic detonator and Full-face Sequential Blasting Method using electronic detonator was applied to the Gyeongbu high-speed railway construction site to test the feasibility of this method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.7
• /
• pp.922-934
• /
• 1993

In this paper, statistical properties of the spatiotemporal center weighted median(CWM) filter for image sequences are investigated. It is statistically shown that the CWM filter preserves image structures under motion at the expense of noise suppression. To improve the CWM filter, a filter which can be effectively used in image sequence processing, the adaptive directional center weighted median filter (ADCWM), is proposed. This filter utilizes a multistage filtering structure based on adaptive symmetric order statistic(ASOS) operators which produce a pall of order statistics symmetric about the median. The ASOS's are selected by using adaptive parameters adjusted by local image statistics. It is shown experimentally that the proposed filter can preserve image structures while attenuating noise without the use of motion estimation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.4
• /
• pp.336-343
• /
• 2009

Secondary flow losses can be as high as 30~50% of the total aerodynamic losses generated in the cascade of a turbine. Therefore, these are important part for improving a turbine efficiency. As well, many studies have been performed to decrease the secondary flow losses. The present study deals with the leading edge fences on a wing-body to decrease a horseshoe vortex, one of the factors to generate the secondary flow losses, and investigates the characteristics of the generated horseshoe vortex as the shape factors, such as the installed height, and length of the fence. The study was investigated using $FLUENT^{TM}$. Total pressure loss coefficient was improved about 4.0 % at the best case than the baseline.