• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.43 no.1
• /
• pp.27-33
• /
• 2017

Up to now, better convenience and portability were important factors in the development of the cosmetics and achieved by immersing low viscosity makeup water-in-oil (W/O) emulsion into the impregnation material. Conventionally, polyurethane sponges having porous network structures and hard textures have been dominantly used. It has an advantage of easy to manufacture because of its good impregnation property due to its structural characteristics. However, it releases emulsion too much at first use, and shows unexpected dramatic decline during the period of usage. In this study, we studied on makeup W/O emulsion with various features and developed the new foaming sponge, which showed excellent formability and proper absorption and discharge ability of cosmetic composition through the combination of natural rubber (NR) and styrene butadiene rubber (SBR). This impregnation material is characterized by the softness of elasticity like a rubber, high elongation and uniform output. We confirmed that this material can be used to develop makeup products using various oils depending on polarity and controlling the viscosity of the makeup W/O emulsion. Thus, it is concluded that these results provide valuable information in developing new cosmetics impregnation materials.

• The Journal of the Petrological Society of Korea
• /
• v.10 no.3
• /
• pp.148-156
• /
• 2001

We report $^{230}Th/^{234}U$ disequilibrium ages of fracture-filling carbonate veins from the Ipsil and Janghangri fault zones, Gyeongju, Korea by multiple collector inductively coupled plasma mass spectrometry. The U and Th fraction was extracted from totally dissolved samples by rapid and convenient coprecipitation and ion exchange chemistry. The recovery was around 80% for Th and 70% for U. The $^{234}U/^{238}U,\;^{230}Th/^{232}Th$ ratios were analysed for this preconcentrated fraction and the U/Th ratio was directly analysed for untreated sample solution. The $^{234}U-^{230}Th$ system is in secular equilibrium for the Ipsil carbonate samples, supporting previously reported ESR ages. The detrital-corrected $^{230}Th/^{234}U$ age of the Janghangri carbonate samples is $48\pm$41 ka, which constrains the minimum age of the fracture zone.

• The Journal of Korean Society for Radiation Therapy
• /
• v.17 no.1
• /
• pp.45-55
• /
• 2005

Purpose : To evaluate the usefulness of the handmade patient immobilization device and to report the clinical results of it. Materials and methods : We made two fusion images and analyzed those images. One image is made with diagnostic MR image and CT image, the other with therapeutic planning MR image and CT image. With open head holder, we measured the skin dose and attenuation dose. Also, we made the planning CT couch plate with acrylic plate and styrofoam and compared artifact. Results : We could get more accurate fusion image when we use MR head holder(within 2mm error). The skin dose was reduced 2 times and the attenuation dose was reduced more than $20\%$ when open head holder used. The planning CT couch plate was more convenient than conventional board and reduced artifact remarkably. Conclusion : We could verify the localization point in the MR image which is taken with MR head holder. So we could fuse the image more accurately. The same method could be applied to PET and US image, if the alike immobilization device used. With open head holder, the skin dose and the attenuation dose was reduced. And those above devices could substitute for expensive foreign device, if those are manufactured adequately.

• Journal of Biomedical Engineering Research
• /
• v.20 no.2
• /
• pp.183-190
• /
• 1999

The purpose of this study was to develop a portable and convenient closed-loop contrel type electrical stimulator for patients with foot drop. This system restores walking movement as well as prevents from atrophy or necrosis of lower limb muscles and increases blood circulation in hemiplegic patients caused by traffic accident, industrial disaster or stoke. This system detects the changes of the ankle joint angle during walking, and then controls the stimulus intensity automatically to maintain the programmed level of the ankle joint angle. Also, this automatic system controls the stimulus intensity which is affected by increased electrode impedance resulting from long time use. The system detects the joint angle by an optical sensor and includes modified PID control which adjusts the stimulus intensity if the joint angle deviates from the preset value. Stimulus parameters are 30~80 volt, 40 Hz, and 0.2 ms. The system was applied to five hemiplegic patients for 42 days. Duration of stimulation was 15 min/day for the first week and then the duration was gradually increased to 30, 60, 90 and 120 min/day. The muscle force was increased up to 29.7%, muscle fatigue was decreased compared with the level before stimulation and the pattern of locomotion was improved. These results suggest that the electrical stimulator with closed-loop control type is more convenient and effective in restoration of locomotion of patients with foot drop than open-loop system.

• Journal of Life Science
• /
• v.21 no.7
• /
• pp.947-952
• /
• 2011

A number of epidemiological studies have identified human papillomavirus (HPV) types 1, 2, 3, 4, 7, 10, 27, 57, and 65 in cutaneous common warts. However, identification of the HPV subtype by conventional polymerase chain reaction (PCR) is time consuming with its multi-step laboratory process. In this study, we aim to develop a specific one-step multiplex polymerase chain reaction method which capably identifies six different HPV genotypes related to common warts. By HPV DNA sequence analysis, 6 pairs of specific primers were designed from the intergenic regions of genes L1 to E6, and from genes E2 to L2. DNA sequence analysis with the L1 gene sequence of the sample was performed to measure the specificity of multiplex PCR. HPV-1, -2, -3, -4, -27, and -57 were identified without cross amplification in 109 out of 129 samples. The sensitivity and specificity of our set of primers in detecting HPV were 85% and 99.5%, respectively. For the 20 samples where HPV type was not identifiable by our batch of primer sets, multiplex PCR with an additional set of HPV primers was done, where 7 were found positive for HPV-7 or -65. Our results demonstrate that the newly designed multiplex PCR can rapidly detect the specific HPV subtype involved in common warts with high accuracy.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.12 no.1
• /
• pp.61-73
• /
• 2010

The cablebolt which secures a workability and stability has been used in foreign countries as one of supporting materials with rebar rockbolt especially in construction of large underground structures. However, only the rebar rockbolt has been applied up to now to all the constructions of underground structures in Korea due to an absence of recognition of cablebolt and large underground structure projects. Consequently, the research for a performance evaluation and verification of cablebolt is very limited and only the proto-type field tests have been conducted. In this study, the cone-shaped button cablebolt is developed by modifying an existing button cablebolt. To evaluate a performance and applicability of cone-shaped button cablebolt, the laboratory pull tests are conducted and bond capacity is analyzed under a various conditions. The rebar rockbolt, plane cablebolt, and bulb cablebolt which has a similar mechanical behavior with cone-shaped button cablebolt, are also tested and their bond capacities are evaluated and compared with cone-shaped button cablebolt under the same condition. The results show that the bond capacity is in the order of (cone-shaped button cablebolt$\approx$bulb cablebolt) > rockbolt > plane cablebolt. It is found that the bond capacity of cone-shaped button cablebolt developed in this study is at least equivalent with an existing high performance cablebolt developed in foreign countries, therefore the cone-shaped button cablebolt could be used as one of supporting materials for underground structures in construction field.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1991.10a
• /
• pp.87-102
• /
• 1991

It has been reported that the failure of Carsington Dam in Eng1and occured due to the existence of a thin yellow clay layer which was not identified during the design work, and due to pre-existing shears of the clay layer. The slope stability analyses during the design work, which utilized traditional circular arc type failure method and neglected the existence of the clay layer, showed a safety factor of 1.4. However, the post-failure analyses which utilized translational failure mode considering the clay layer and the pre-existing shear deformation revealed the reduction of safety factor to unity. The post-failure analysis assumed 10。 inclination of the horizontal forces onto each slice based on the results of finite element analyses. In this paper, Bishop's simplified method, Janbu method, and Morgenstern-Price method were used for the comparison of both circular and translational failure analysis methods. The effects of the pre-existing shears and subsquent movement were also considered by varying the soil strength parameters and the pore pressure ratio according to the given soi1 parameters. The results showed factor of safefy 1.387 by Bishop's simplified method(STABL) which assumed circular arc failure surface and disregarding yellow clay layer and pre-failure material properties. Also the results showed factor of safety 1.093 by Janbu method(STABL) and 0.969 by Morgenstern-Price method(MALE) which assumed wedge failure surface and considerd yellow clay layer using post failure material properties. In addition, dam behavior was simulated by Cam-Clay model FEM program. The effects of pore pressure changes with loading and consolidation, and strength reduction near or at failure were also considered based on properly assumed stress-strain relationship and pore pressure characteristics. The results showed that the failure was initiated at the yellow clay layer and propagated through other zones by showing that stress and displacement were concentrated at the yel1ow clay layer.

• Journal of Hospice and Palliative Care
• /
• v.7 no.2
• /
• pp.200-213
• /
• 2004

Purpose: The purpose of this study was to create an electronic nursing record form to build a hospice nursing process database to be used in the u-hospital EMR system. Specific aims of the study were: 1. To generate a complete, accurate, and simple electronic nursing record form. 2. To verify its appropriateness following documentation with the standardized hospice protocol. 3. To verify its validity and finalize the hospice nursing process database through discussion among hospice professionals. Methods: Nursing records from three independent hospice organizations were collected and analyzed by five expert hospice nurses with more than 10 years of experience, and a nursing record database was developed. This database was applied to 81 hospice patients at three hospice organizations to verify its completeness. Results: 1. An electronic nursing record form with completeness, accuracy, and simplicity was developed. 2. The completeness of the standardized home hospice service protocol was 95.86 percent. 3. The hospice nursing process database contains 18 items on health problems, 79 items on related causes and major symptoms, and 229 items on nursing interventions. Conclusion: The new nursing record form and database will reduce documentation time and articulate and streamline the working process among team members. They can also improve the quality of hospice services, and ultimately enable us to estimate hospice service costs.

• Journal of Nutrition and Health
• /
• v.51 no.6
• /
• pp.590-598
• /
• 2018

Purpose: This study was conducted to compare the food involvement scale (FIS) of American and Japanese consumers. In addition, the effects of familiarity, likability, and expectations on willingness to use intentions for block type sauce by nationality were evaluated. Methods: A total of 149 and 112 American and Japanese consumers, respectively, completed the survey. Consumers were asked about familiarity, likability, expectation, willing to use intention, and usage frequency of block type sauce, food involvement scale (FIS), and demographic information. Results: There were differences in the using frequency of block type sauce according to nationality, with consumers in Japan showing significantly higher frequency of using block type sauce than those in the United States (US) (p < 0.001). According to the FIS, US consumers were more focused on how to provide food than food, such as cooking process, table setting, and food shopping, compared to Japanese consumers. In addition, 'expectation' and 'likability' among US consumers and 'expectation' and 'familiarity' among Japanese consumers were positive attributes for willing to use intention (p < 0.01). Conclusion: In the case of the US consumers, 'familiarity' was not significant because the using frequency of the block type sauce was lower than that of Japanese consumers. In the case of the Japanese consumers, 'likability' was not significant because they enjoy cooking itself according to the FIS. Therefore, it is necessary to recognize positive attributes as a key factor for block type sauce, as well as to search for ways to apply marketing strategies based on attributes by nationality.

• Korean Journal of Food Science and Technology
• /
• v.49 no.3
• /
• pp.324-330
• /
• 2017

The aim of this study was to determine quality characteristics of the curry sauce fortified using Curcuma aromatica Salisb. powder with and without fermentation. Here, the sensory, physicochemical, and antioxidant activity characteristics of the fortified curry sauces were measured. The L, b values of the samples containing the fermented C. aromatica Salisb. were significantly higher than those of the control (p<0.05). The total phenol content of the experimental groups was significantly higher than that of the control (p<0.05). There were no significant differences between the control and the sample fortified with fermented C. aromatica Salisb. (FC1) in the acceptance attributes of curry, spiciness and bitterness. Furthermore, the overall acceptance was similar enough to show no differences between the control and FC1. Thus, we can conclude that the curry sauce fortified using the fermented C. aromatica Salisb. by 1% was successfully developed in the competitive HMR market to promote antioxidant activity without decreasing the sensory characteristics.