• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.140-143
• /
• 2007

A continuing elevated bridge is replaced with mass-spring system model, and a part of the bridge is cut out as an analytical area. A viscous boundary is installed at both ends, and dynamic analyses are carried out changing the wave velocity of the viscous boundary, The result is compared with a result of a very long model corresponding to the solution with infinite length. A wave velocity is chosen so that the good performance of a viscous boundary is exhibited. The parametric analyses are carried out changing the model of various structural properties, and an approximation expression is suggested to obtain the wave velocity easily for setting a viscous boundary.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1258-1262
• /
• 2007

수치해석분야에서 가장 난해한 부분은 복잡한 지형을 표현할 수 있는 격자망을 쉽고 간편하게 생성하고 수치모형에 적용하는 것이다. 가장 쉽고 널리 적용되던 직사각형격자망의 한계를 극복하기 위하여 곡선좌표계를 이용하거나, 삼각형 또는 사각형의 불규칙 격자망을 적용하여 복잡한 지형을 표현하는 연구들이 시도되었다. 그러나, 곡선좌표계를 이용하여 지배방정식을 변환하는 방법은 지배방정식이 매우 복잡하고 수치모형의 구성이 난해하며, 불규칙 격자망을 이용한 방법은 계산영역을 적절히 표현하는 격자망을 구성하기 위해서 상당한 노력과 시간이 소요되는 단점이 있다. 이에, 직사각형의 격자망과 비구조 격자망의 장단점을 보완하여 수치격자 구성이 간편하고 지형을 정확히 표현할 수 있는 기법에 대한 연구가 필요한 단계에 이르게 되었다. 본 연구에서는 직사각형 격자를 기본으로 지형을 따라 계산격자를 분할하는 기법인 cut-cell기법을 이용하여 계산격자망을 구성하고, 그 적용성을 검토하였다.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2016.11a
• /
• pp.188-189
• /
• 2016

본 논문은 초기하중을 하중을 받는 역대칭 angle-ply 와 cross-ply 적층판의 좌굴 및 진동특성을 무재하시의 고유진동수를 이용하여 산정하는 간편법을 제시하였다. 마주보는 두변이 단순 지지된 역대칭 적층판의 운동방정식은 전단변형과 회전강성효과를 고려한 YSN 이론으로 유도하였으며 이를 선점법을 이용하여 해석하였다. 초기응력을 받는 적층판의 무차원화 고유진동수, 임계좌굴계수 및 동적 주 불안정영역 문제들을 무재하시의 무차원화 고유진동수로서 각각의 특성을 정립시켰다. 본 연구에서 제안한 진동특성에 관한 간편산정식의 정당성과 사용성을 입증하기 위하여 수치예들로서 검토하였다.

• Journal of Sericultural and Entomological Science
• /
• v.20 no.2
• /
• pp.36-39
• /
• 1978

With the current advances in insect toxicant bioassay, the need for easy methods of estimating the dosage-mortality regression equation has become vital. The Probit analysis seems to be not convenient for estimating the dosage-mortality regression equation and median lethal dose(LD50) because of its complexity in calculation. This study presents a comparision between Probit and Losit transformation for the estimation from bioassay results. Validation of the two methods is presented for the pathogenecity of nuclear polyhedrosis virus to the larva of fall web worm, Hyphantria cunea D.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.8
• /
• pp.47-57
• /
• 2007

In this study, the analysis of density characteristics of some dredged and reclaimed ground sites, which is necessary for liquefaction evaluation of a dredged and reclaimed ground, was conducted. From analyzing a simplified liquefaction potential evaluation using SPT-N values which have been applied as domestic earthquake-resistant design criterion, improvement scheme is suggested. Based on the analysis result of density characteristics, it was found out that the relative density and the intial N-value ranged respectively $40{\sim}50%\;and\;5{\sim}8$. In the case of applying Liao & Whitman's equation to correct effective overburden pressure, liquefaction resistance of the upper ground that is relatively weaker than that of lower ground is overestimated. So, Skempton's equation is recommended. And the N value with depth which is applied for design process should be estimated by the exponential equation, $N=1.35{\sigma}'^{0.75}$.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.698-702
• /
• 2009

본 연구는 강원도 영서지방의 지방하천을 중심으로 수리특성 및 교각제원 등을 조사하여 기존 세굴심 산정식의 산정 값과 모형실험 산정 값을 비교 검토 하였으며, 또한 교각의 세굴에 영향을 주는 인자에 대하여 통계학적 방법인 민감도 분석을 하였다. 이에 따른 분석결과 기존 세굴심 산정식의 경우 전체 적으로 교각 크기가 커지면서 산정 값과 모형실험 산정 값간의 편차가 $1.09%{\sim}63.98%$ 를 보이고 있어, 강원도 하천의 경우 기존 세굴심 산정식을 적용하여 산정하기에는 적합하지 않은 것으로 판단되었으며, 기존 세굴심 산정식 중 교각크기만으로 형성된 산정식의 경우 세굴심산정이 간편하기는 하나, 수리특성을 충분히 반영하지 못한 산정식의 경우 민감도가 크게 떨어지는 것을 확인 할 수 있었다. 모형실험 산정 값과 세굴심에 대한 민감도 분석결과, 교각크기 64%, 수심 36% 순으로 세굴심 발생에 유의적인 영향을 미쳤으며, 모형실험의 세굴심 값을 토대로 회귀분석을 통하여 강원도 하천에 적합한 세굴심 산정식을 제안 하였다.

• Journal of the Korean Society of Food Culture
• /
• v.32 no.5
• /
• pp.383-393
• /
• 2017

This study was conducted to analyze the dietary lifestyle of local Chinese consumers and to classify dietary characteristics according to their dietary lifestyle factors and dietary behaviors. This investigation was conducted for 1 month from 1 January 2017 targeting 300 adult males and females living in China using the online survey company surveymonkey. Four factors relating to dietary lifestyle were identified, gourmet factor, healthy factor, convenience factor and economic factor, and these were grouped into 4 clusters according to their dietary lifestyle factor scores. Group 1, the gourmet economy group, showed a high percentage of living alone and a high frequency of eating out, but a relatively low percentage of three regular meals per day. Their dietary lifestyle was sensitive to gourmet factors and economic factors, but less sensitive to health and convenience factors. Group 2, the wide interest group, contained a high percentage of individuals in their 30s, as well as more highly educated individuals and a higher income than other groups. Because their dietary lifestyle scores tended to be higher than those of other groups, they sought a variety of new foods and gourmet meals for enjoyment of dining and life, as well as well-being food materials and foods related to health. Group 3, the health economic group, constituted a family-type consumer group with lower income level than the other groups. Members of this group were seeking health food and natural food in their dietary lifestyle and tended to pursue a high economic profit ratio when purchasing food. Finally, group 4 showed a relatively higher percentage of women over 30 and individuals with a college level or higher education than the other groups. This group was more interested in health and taste than price and convenience, and showed the highest LOHAS orientation among middle aged Chinese women. Moreover, members of this group directly utilized their knowledge regarding nutrition in real life.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.10
• /
• pp.33-43
• /
• 2016

The determination of in-situ capping materials is one of the most important factors to design in-situ capping in order to protect capping materials from erosion. Previous studies have established relationship between the velocity induced by wave energy and effective diameter of sediments, but they are mostly empirical and numerical researches which is too complicated for field engineers to analyze the erosion of in-situ capping materials. This study provides simple analytical solutions and reliability based on hydraulic model test results. Experimental results show that measured flow velocities with respect to depth induced by wave energy are almost the same as estimated velocities and the erosion resistances of the different effective particle diameters can be estimated.

• Journal of Korea Water Resources Association
• /
• v.40 no.8
• /
• pp.665-675
• /
• 2007

An equation is developed to estimate potential groundwater resources available for development. This equation is useful for preliminary planning stages prior to detailed design stages. The equation is a function of major factors such as aquifer characteristics, saltwater intrusion length, coastal groundwater discharge and potential locations of pumping wells. Thus, most important factors are taken into account. The equations are derived using well-known analytical solutions. Thus, the basis is scientifically sound. Use of the equation is quite simple since it is an explicit function of variables. A logical method is proposed to assess a radius of influence of a pumping well considering aquifer characteristics and the pumping rate. Applications to a hypothetical problem and comparison with results from a more rigorous numerical simulation model indicate that results obtained from the proposed equation are conservative.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.1
• /
• pp.399-405
• /
• 2012

This paper investigates the characteristics of buckling loads for steel arches with new type cross section which is consisted of T-section and pipe-section. A general purpose finite-element program ABAQUS was used to evaluate the inelastic buckling strengths of the arches which included the influence of the geometric and material nonlinearity. According to the comparisons between earlier studies and results from finite-element analyses, new design equations should be developed for the new arches. New buckling factors were developed to consider influence of rise-to-span ratio and boundary conditions. It is found that the presented factors are sufficiently accurate to predict the inplane buckling loads of new type section steel arches subjected to uniformly distributed loading. The proposed equations can be used to investigate new type steel arches subjected to unsymmetrical loading and composited arches.