• Journal of Bio-Environment Control
• /
• v.18 no.3
• /
• pp.253-257
• /
• 2009

To analysis effect of environment factors on productivity of sweet pepper according to greenhouse covering material (glass, plastic film), this was investigated. In glasshouse, outside light was positively correlated with yield as that $100MJ{\cdot}m^{-2}$ of outside light increased $300{\sim}500g{\cdot}m^{-2}$, also cumulative temperature was same tendency. On possibility of model development for yield estimate cumulative temperature was high than outside light. According to covering material, leaf photosynthesis, productivity per out-side light and term in glasshouse was more high 13%, 46%, and 47% compared with plastic film house, respectively. Result of analysis of effect of light, temperature, and $CO_2$ on yield, relative yield coefficient, yield increment coefficient, and yield reduction coefficient in glasshouse were more high 25%, 73%, and 34% compared with plastic film house, respectively. Hence, sweet pepper's growing in glasshouse compare with plastic film house had more productivity, but that had more sensitivity to charge of environment factors.

• Korean Journal of Plant Resources
• /
• v.13 no.3
• /
• pp.208-212
• /
• 2000

The effect of heat covering materials during cultivation of Shigyoku grape was examined on the effect of protection from freezing damage, labor reduction, and disease resistance during the wintering. This experimentwas accomplished using different combination of heat covering materials from the end of Nov as follows: straw and heat conservation cover B, kilding, color fabric A, and white needle punching fabric. Capacity of heat conservation was the least form white needle punching fabric, and the differences of other materials was slight. Early sprouting occurred by the treatment with heat conservation cover B, and the rate of sprouting was about 70.7% after 9 days of sprouting, showing 2.3-12.5% increase. Growth effect was not differ between heat conservation materials. Disease and insects occurred by the in dice 3.0-3.2 of crown gall from the heat conservation cover B treatment. Other damages were not observed or very little from other treatments. Demand of labor during steps of these treatments was more observed by 6% for kilding than heat conservation cover B, and those of color fabric A and white needle punching fabric were reduced by 6 and 15%, respectively.

• Journal of Bio-Environment Control
• /
• v.12 no.2
• /
• pp.72-76
• /
• 2003

This study was conducted to estimate stimulation of plant growth of green and red leafy lettuces (Lactuca sutiva L. cv. Chungchima and Jugchima) at affected by covering method and time with protected film materials containing concentrated PO film and GA$_3$ foliar spray. Plants were covered with ‘Pasraido’ material from October 26 to November 31 (direct 1), from November 5 to November 31 (direct 2), or with a tunnel, or direct 2＋ tunnel. Mean air temperature and relative humidity under the covering were higher in direct and tunnel, direct and non-covering, in that order. The fresh weight and dry weight of red and green lettuces increased in direct and tunnel followed by direct 1, direct 2, tunnel and the control. GA$_3$ treatment promoted the growth in all covering methods, but decreased the chlorophyll contents. Fresh weight and dry weight were higher in red lettuce than in green lettuce in the control.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.3
• /
• pp.147-160
• /
• 2020

A stochastic probabilistic model for harbor structures such as rubble-mound breakwater has been formulated by using the generalized Wiener process considering the nonlinearity of damage drift and its nonlinear uncertainty, by which the damage path with real-time can be tracked, the residual useful lifetime at some age can also be analyzed properly. The formulated stochastic model can easily calculate the probability of failure with the passage of time through the probability density function of cumulative damage. In particular, the probability density functions of residual useful lifetime of the existing harbor structures can be derived, which can take into account the current age, its present damage state and the future damage process to be occurred. By using the maximum likelihood method and the least square method together, the involved parameters in the stochastic model can be estimated. In the calibration of the stochastic model presented in this paper, the present results are very well similar with the results of MCS about tracking of the damage paths as well as evaluating of the density functions of the cumulative damage and the residual useful lifetime. MTTF and MRL are also evaluated exactly. Meanwhile, the stochastic probabilistic model has been applied to the rubble-mound breakwater. The related parameters can be estimated by using the experimental data of the cumulative damages of armor units measured as a function of time. The theoretical results about the probability density function of cumulative damage and the probability of failure are very well agreed with MCS results such that the density functions of the cumulative damage tend to move to rightward and the amounts of its uncertainty are increased as the elapsed time goes on. Thus, the probabilities of failure with the elapsed time are also increased sharply. Finally, the behaviors of residual useful lifetime have been investigated with the elapsed age. It is concluded for rubble-mound breakwaters that the probability density functions of residual useful lifetime tends to have a longer tail in the right side rather than the left side because of the gradual increases of cumulative damage of armor units. Therefore, its MRLs are sharply decreased after some age. In this paper, the special attentions are paid to the relationship of MTTF and MRL and the elapsed age of the existing structure. In spite of that the sum of the elapsed age and MRL must be equal to MTTF deterministically, the large difference has been shown as the elapsed age is increased which is due to the uncertainty of cumulative damage to be occurred in the future.

• Nuclear Engineering and Technology
• /
• v.15 no.1
• /
• pp.57-69
• /
• 1983

The LWR fuel performance analysis computer code, FRAPCON-1, are evaluated to investigate the performance of CANDU fuel elements loaded in Wolsung-1 reactor. The FRAPCON-1 models of neutron flux depression in fuel and of fuel-to-cladding heat transfer are modified, and the validity of fission gas release model for CANDU fuel is evaluated. And the heavy water properties are provided in calculating the heat transfer coefficient between cladding and coolant. By using the modified code, FRAPCON-1-CSK, the sensitivity studies are carried out for Wolsung-1 fuel element design parameters. The performance analysis is also performed for Wolsung-l fuel elements. The calculated results are discussed in terms of. LWR fuel design criteria because of unavailability of CANDU fuel design criteria.

• Nuclear Engineering and Technology
• /
• v.24 no.3
• /
• pp.228-235
• /
• 1992

Some soluble species may not be solubility-limited or congruent-released with the matrix species. For example, during the operation of the nuclear reactor, the fission products can be accumulated in the fuel-cladding gap, voids, and grain boundaries of the fuel rods. In the waste package for spent-fuel placed in a geologic repository, the high solubility species of these fission products accumulated in the“gap”, e.g. cesium or iodine are expected to dissolve rapidly when ground water penetrates fuel rods. The time and space dependent mass transport for high solubility nuclides in the gap is analyzed, and its numerical illustrations are demonstrated. The approximate solution that is valid for all times is developed, and validated by comparison with an asymptotic solution and the solution obtained by the numerical inversion of Laplace transform covering the entire time span.

• Journal of Bio-Environment Control
• /
• v.19 no.1
• /
• pp.1-5
• /
• 2010

This research was conducted to investigate difference of internal temperature, humidity, and plant growth according to covering materials in sweet pepper's greenhouse. For growing period, daily mean internal temperature was not different between glass (GH) and plastic film house (PH), but the changed volume was more PH than GH. Internal humidity deficit was more PH than GH as that was 4.3 $g{\cdot}m^{-2}$ and 5.6 $g{\cdot}m^{-2}$, respectively. In change of internal temperature effected by different intensity of external light, that of PH was fasted twice that of GH, and that's tendency was effected by difference of internal temperature for several hours after sunrise. Leaf growth and photosynthetic product were more GH than PH, productivity of GH was better 80 percents than PH. As results, To improve productivity in PH compared with productivity in GH need to be the detailed managements of internal environmental factors in early period after sunrise.

• Journal of the Korean Ceramic Society
• /
• v.35 no.2
• /
• pp.137-144
• /
• 1998

High-temperature superconducting joints between 61 filaments of Bi-2223 tapes were fabricated by chem-ical corrosion and repeated thermomechanical process. The silver sheath of the superconducting tape was chemically removed using chemical etchant(NH4OH:H2O2=1:1) from one side of each tape without altering the form of lap joint. The joined region was formed by uniaxial pressing and a series of thermomechanical process and then subjected to properties measurement and microstructural analysis. The critical current(Ic) variation and I-V characteristics along the joint were mesured with several configuration of proble points. Ic value of the transition region of the joint inthe multifilament tape which limit the total current carring capacity of the superconducting tape was higher than that of monofilament tape. But the transition ex-ponent n-value of the multi-filament tape was lower than that of monofilament wire due to the interaction of the individual superconducting core of the multi-filament. The critical current through the joint area was improved by respeated press and reaction annealing treatment.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.12 no.1
• /
• pp.29-38
• /
• 2010

This research was conducted to improve a hill seeding technology under puddled wet soil condition for direct seeded rice. There were severe constrains in hill sowing method under puddled wet soil such as a bird damages, dryness of seeds sown due to strong sunlight in May and buoyancy of seeds and young seedlings after raining and irrigation particular under strong wind. Thus, we have adopted a sandy type(<2mm) silicate covering method in Bokto drill seeding technology for a hill seeding method as well. The average silicate amount in order to cover seeds sown was of 840kg/ha which was evaluated to a proper volume for those problem solution and farmer's handling during sowing operation. In this experiment there was an additional problem like a precious hill drop of rice seeds, covering of silicate over hill seeded rice and seed broken during roller operation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.31 no.3
• /
• pp.361-365
• /
• 1986

This study was conducted to investigate the growth characteristics for each of botanical types of peanut (Arachis hypogaea L.) under vinyl-and non-mulching in cultural limiting region. Ten peanut varieties pertaining to virginia-large seed, virginia-small seed, spanish, valencia, shinpung type were used in this study. Main stem length was in order of valencia, spanish, virginia-small seed, shinpung, virginia-large seed type under vinyl-and non-mulching. By vinyl-mulching, the maximum growth stage of main stem was shortened by 20 days than that of non-mulching. Number of branches per plant was distinguished among botanical types. Numbers of those were virginia-small seed 28, virginia-large seed 27, shinpung 15, spanish 13, valencia 7 under vinyl-mulching and were virginia-small seed 22, virginia-large seed 21, spanish 12, spinpung 12, valencia 5 under non-mulching. The longeset branch length was in order of valencia, spanish, spinpung, virginia-large seed, virginia-small seed type under vinyl-and non-mulching and velencia type was the longest of the botanical types.