• Journal of the Korean GEO-environmental Society
• /
• v.20 no.2
• /
• pp.29-40
• /
• 2019

Mechanized constructions have been frequently increased in soft ground below sea bed or river bed, for urban tunnel construction, and for underpinning the lower part of major structures in order to construct a safer tunnel considering various risk factors during the tunnel construction. However, it is difficult to estimate the subsidence behavior of the ground surface due to excavation and needs to be easily predicted. Thus, in this study, when a twin tunnel is constructed in the soft ground, it is proposed a simpler equation relating to the settlement behavior and a corrected formula applicable to soft ground and large diameter shield tunnels based on the previously proposed theory by Peck (1969). For this purpose, it was analyzed to long-term measurement values such as the amount of maximum settlement, the subsidence range by ground conditions, and interference volume loss due to the parallel construction, etc. As a result, a equation was suggested to predict the amount of maximum settlement in the soft sediment clay ground where is located at the upper part of the excavation site. It is turned out that the proposed equation is more suitable for measurement data in Korea than Peck (1969)'s.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1994.04a
• /
• pp.167-171
• /
• 1994

본 연구에서는 차폐구조 내부에 위치한 소음원의 체적이 비교적 큰 근접 음향 차폐구조로 취급하여, 구조 내부의 공간적 음장분포해석(spatial sound distribution analysis)은 하지 않고 단지 소음원의 표면과 차폐 벽면 간의 공기층에 의한 간섭 영향을 고려하면서, 차폐로 인한 음압의 상승(build up)효과를 고려하여, 직육면체의 형상을 가지는 차폐구조에 부착되는 각각의 벽면들의 음향 삽입손실(Insertion Loss, IL) 특성을 전달매트릭스 기법(Transfer Matrix Analysis, TMA)을 이용하여 해석하였으며, 이러한 벽면들에 대한 이론 해석의 결과로 제작된 벽면들의 음향차폐특성을 시험을 통해 나타내었다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.9
• /
• pp.883-890
• /
• 2011

A numerical study was conducted to determine the optimal design for a vehicle vacuum pump. The degree of vacuum was examined for different design factors such as the angle of vanes, number of vanes, angle and position of the pump inlet-outlet pipe, and angular rotational speed of vanes. The results show that there is a little difference in the degree of vacuum when the angle of vanes are changed, but an angular change in the outlet pipe reduces the pump loss. As the rotational speed is increased, the mass flow rate increases, but a high rotational speed does not result in the maximum degree of vacuum. In addition, when the number of vanes is increased, the scattering range of mass flow rate decreases and pressure drop is abated.