• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.3
• /
• pp.175-183
• /
• 1994

간섭무늬기술을 효과적으로 사용하기 위하여, 간섭무늬 데이터를 빠르고 정확하게 간단히 줄여나가는 것이 필수적이다. 그러나, 심한 잡음이 존재할 때 현재 사용하는 방법을 적용하면 위상풀이에 오차가 생기거나, 무늬치수선정에 문제가 생겨, 근본적으로 대화식 수정작업이 필요하다. 결국 이러한 수동식 작업은 좀더 나은 완전한 자동해석을 위해 전문가시스템으로 대체할 수 있을 것이라 기대하여 왔다. 이 논문에서는 빠르고 기준 지식으로 조작할 수 있으며, 또한 유연성이 있는 새로운 통합 전문가시스템을 제시하였다. 이러한 조건을 만족 시키기 위해 고속 알고리즘에 적합한 C언어를 이용하여 전문가시스템의 쉘을 구성하였다. 이렇게 개발한 시스템이 간섭무늬해석의 전체 진행과정을 수행하게 하였다. 즉, 언어변환 해석을 하지 않고도 기준지식의 확보, 간섭 및 설명을 할 수 있으며 영상판독, 영상수정, 영상분할 및 형상추출 등을 수행하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.4
• /
• pp.459-465
• /
• 2013

This paper presents a differential interferometry technique for soil moisture change detection by measuring surface-height variation. COSMO-SkyMed SAR images were used to verify the DInSAR(differential interferometric SAR) technique. The soil penetration depth changes according to soil moisture, that causes phase change of the received signal. The height of soil surface and its displacement can be detected by a radar interferometry technique using phase difference of two received signals. To retrieve displacement variation, one of three SAR images is used as a reference image. Reference image and other two images are processed by the differential interferometry technique in the same area. The soil moisture was measured for the test sites to verify the DInSAR technique. The penetration depth is calculated by using the in-situ measured soil moisture data and it is compared with the displacement values acquired by the DInSAR technique.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.12
• /
• pp.1388-1398
• /
• 2012

SAR(Synthetic Aperture Radar) systems can provide images of wide coverage in day, night, and all-weather conditions. However wideband SAR systems are known to be vulnerable to interferences from other devices operating at in-band or adjacent spectrums and this may lead to image corruptions. In this paper, a SAR point target simulator is developed that provides performance analysis on image distortion caused by interferences from other devices. Interference signals are generated based on the experimental data observed from acquired SAR raw data. Simulation results include typical SAR performance measures such as spatial resolution, peak to sidelobe ratio and integrated sidelobe ratio. Finally, SAR target simulations are performed and shown to correspond to the image corruptions found in real SAR missions affected by RF interferences.

• Aerospace Engineering and Technology
• /
• v.8 no.1
• /
• pp.187-196
• /
• 2009

Synthetic Aperture Radar(SAR) satellite system for broad-area imaging has RF systems including SAR radiating a high power, data link system transmitting the acquired image data from the SAR, TC&R(Telemetry, Command, and Ranging) to communicate with a ground segment to control a satellite. Each system transmits RF signal having various frequencies and radiates a high power, RS(Radiated Susceptibility) specification should be verified at an electronic unit mounted in satellite. RF interference can be happened because of non-linearity of a RF system. Therefore, we manufactured a structure model installed antennas which have a similar pattern with a real antenna, the effect by RF interference is analyzed and verified.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.14 no.1
• /
• pp.84-92
• /
• 1989

The purpose of this paper is to demonstrate the effect of a FH spread spectrum communication interference in TV channels and frequency compatibility in 30-88 MHz frequency band. To calculate this interferece, the strength of electric field of TV signals is derived as a function of distance between TV transmitter and receiver. An interference model is established based upon thefield strength by using the relation between the transmitted power of FH spread spectrum communications and the distance between the TV image signals, which makes TV screen a cceptble, Simultaneous transmission of FH sprea spectrum signals and TV signals is shown to be feasible, as far as the interference level is lower than the TV image signal level by 23.5dBm. As a result of frequency analysis and experiment, the FH spread spectrum communication can be used together with TV channels.

• Proceedings of the KSRS Conference
• /
• 2008.03a
• /
• pp.148-152
• /
• 2008

뉴올리언스는 미시시피 강 하구에 위치하였으며 지난 2005년 허리케인 카트리나에 의해 큰 침수 피해를 입은 지역이다. 이 도시는 신생대 지층에 자리하고 있어 미고결층의 다짐작용 및 단층작용으로 최대 29mm 정도의 연간 침하율을 보여 왔다. 뉴올리언스의 계속된 침하작용은 평균해수면보다 낮은 지역에 위치한 도시의 침수위험성을 가중시키고 있어 현재 이에 관한 많은 연구가 진행되고 있다. SAR영상을 이용한 차분간섭기법(DInSAR, Differential Interferometry of SAR)은 지반침하, 지진, 화산활동 등과 같이 수십 km$^2$에 걸쳐 발생하는 지표변위를 수cm-수mm의 정밀도로 관측 가능한 기술이다. 이 연구에서는 차분간섭기법을 이용하여 2005년 2월부터 2007년 2월까지 촬영된 21개의 RADARSAT-1 Fine beam mode(F5) 영상으로부터 25개의 차분간섭영상(DInSAR Interferogram)을 생성하였다. 또한 차분간섭도의 spatial decorrelation을 극복하고 시간에 따른 LOS 방향의 변위를 관측하기 위해 분석 알고리즘으로는 보완된 SBAS(small baseline subset)기법을 이용하였으며, 이 기법을 이용하여 대기의 영향 및 노이즈를 제거한 결과를 얻을 수 있었다. 우리는 LOS방향의 2차원 변위분포 맵을 작성하였으며, 그 결과 전체적인 침하율은 크지 않지만, 도시의 서쪽지점에서 나타나는 상대적으로 큰 -1.49cm/yr의 변위 값과 동쪽 지점에서 0.33cm/yr의 변위 값을 관측하였다. 이 같은 결과는 앞으로의 연구에서 실측 데이터 및 동일기간의 다른 SAR영상자료의 연구를 통해 보완해 나갈 것이다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.5-9
• /
• 2004

In this paper, we studied the OCT(Optical Coherence Tomography) system which it has been extensively studied because of having some advantages such as high resolution cross-sectional images, low cost, and small size configuration. A basic principle of OCT system is Michelson interferometer. The characteristics of light source determine the resolution and the transmission depth. As a results, the light source have a commercial SLD with a central wavelength of 1,285 nm and FWHM(Full Width at Half Maximum) of 35.3 nm. The optical delay line part is necessary to equal of the optical path length with scattered light or reflected light from sample. In order to equal the optical path length, the stage which is attached to reference mirror is moved linearly by step motor And the interferometer is configured with the Michelson interferometer using single mod fiber, the scanner can be focused of the sample by using the reference arm. Also, the 2-dimensional cross-sectional images were measured with scanning the transverse direction of the sample by using step motor. After detecting the internal signal of lateral direction at a paint of sample, scanner is moved to obtain the cross-sectional image of 2-demensional by using step motor. Photodiode has been used which has high detection sensitivity, excellent noise characteristic, and dynamic range from 800 nm to 1,700 nm. It is detected mixed small signal between noise and interference signal with high frequency After filtering and amplifying this signal, only envelope curve of interference signal is detected. And then, cross-sectional image is shown through converting this signal into digitalized signal using A／D converter. The resolution of the OCT system is about 30$\mu\textrm{m}$ which corresponds to the theoretical resolution. Also, the cross-sectional image of ping-pong ball is measured. The OCT system is configured with Michelson interferometer which has a low contrast because of reducing the power of feedback interference light. Such a problem is overcomed by using the improved inteferometer. Also, in order to obtain the cross-sectional image within a short time, it is necessary to reduce the measurement time for improving the optical delay line.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.5
• /
• pp.126-131
• /
• 2004

As a noninvasive imaging method, optical coherence tomography system has been extensively studied because it has some advantages such as imaging of high resolution, low cost, and compact size configuration. In order to improve the SNR of OCT system, two types of interferometers were configured and then, we compared simulation with measurement of reference sample. In the OCT system is configured with Michelson interferometer, the contrast of cross-sectional image is reduced with low SNR detection which is due to loss of feedback interference signal from light source part. Also, in order to image measured data with real time, image processing program is constructed. From results of simulation, it is confirmed that improved Michelson interferometer is improved about 10[dB] with a 50 : 50 fiber coupler. And from the measurement of reference sample, about 5[dB] is improved with a 50 : 50 fiber coupler. It is confirmed that the OCT system is configured with the improved Michelson interferometer which has a good distinctive cross-sectional image due to higher contrast.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.12
• /
• pp.2271-2276
• /
• 2008

In this paper, we propose a computational integral imaging reconstruction (CIIR) method based on scale-cariant magnification technique for resolution-enhanced 3D images. First, we introduce an interference problem among elemental images in CIIR. Magnification by a large factor causes inference among elemental images when they are applied to the superposition process. Thus, the resolution of reconstructed images is limited. To overcome the interference problem, we propose a method to calculate a minimum magnification factor while CIIR is still valid. Magnification by a new factor enables the Proposed method to reconstruct resolution-enhanced images. In addition, the computational load of the proposed method is less than that of the previous method. To confirm the feasibility of the proposed method, some experiments are carried out and the results are presented.

• The Journal of the Korea Contents Association
• /
• v.2 no.3
• /
• pp.80-86
• /
• 2002

In this paper, we propose the new optical security technique using two phase holograms based on interferometer. The encoded random phase image does not have any information on the original image. Without Hewing the key mask, one cannot decode the encrypted image and regenerate the original image. And the use of two phase only images in the proposed security system leads to maximum optical efficiency (100% in theory). Also they cannot be detected by an intensity detector such as a CCD camera. Computer simulations and optical experiments show performance of the proposed methods.