• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.129-129
• /
• 2003

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1994.10a
• /
• pp.521-528
• /
• 1994

레이저광의 우수한 가간섭성으로 인해서 거친표면으로 부터 확산된 광에서도 간섭현상을 볼 수가 있다, 이와 같은 레이져광의 독특한 특성으로 인해 나타나는 스페클은 광학적인 간섭계를 사용하여 광을 확산적으로 반사시키는 물체의 변형과 변위, 진동 등을 비접촉적으로 측정 할수 있게 되었다.이와같은 측정법으로써 Holography 간섭법, Speckle 간섭법, Speckle 사집법등이 있으며 비록 이러한 측정법들이 독립적으로 발전되었다 할지라도 기본적인 광학적인 배치와 함수들에 있어서는 유사한 특징을 가지고 있다. 따라서 본 연구에서는 주로 면내변형을 측정하기위한 스페클간섭법에 있어서의 스페클 사이즈와 그에 따른 측정 한계를 확인할 것이다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.4
• /
• pp.806-812
• /
• 1988

When laser interference method is used to measure stress intensity factor with experiment, crack molded from teflon crack molding method is better than the crack manufactured through fatigue test. It is known that center distance between two indentations which is best for detecting the laser interference fringe order is about 80.mu.m with photodetector used in this research. Errors with measurement of stress intensity factor through laser interference are between 2% and 11%, therefore, experimental process and method developed in this research can be used with obtaining the more precision experimental data for stress intensity factors.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.4 s.181
• /
• pp.7-13
• /
• 2006

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.4 s.181
• /
• pp.22-28
• /
• 2006

• Journal of the Korean Society for Nondestructive Testing
• /
• v.22 no.4
• /
• pp.402-410
• /
• 2002

Recently the necessity of study on optical measuring method using laser to detect the pipeline's defect in nuclear facilities, chemical industries and power plants has been increased. Because laser light can be delivered to a remote area without any difficulties, the application of laser in many industries can solve several difficulties from the limitation of access in danger area and reduce the risks of workers. Therefore, we applied a new experimental technique to the measurement of internal defects in pressure vessels with the combination of shearography and image processing technique and detected the internal cracks of pressure vessels in the former paper. In this paper, we used the same optical system as in the former study and found the optimum shearing magnitude by comparing the real length of specimen with experimental results. A variety of conditions were applied to certify the validity of this method. Actually, several specimens which have different lengths and depths were used in this experiment under the three diverse pressure. Consequently, we have carried out this experiment to determine the limit of measurement ability with analyzing errors.

• Journal of the Mineralogical Society of Korea
• /
• v.13 no.3
• /
• pp.138-146
• /
• 2000

Using the ultrasonic interferometry on the single crystal MgO-periclase, adiabatic bulk moduli were determined to be 163.2 GPa and 162.6 GPa from (100) and (110) lattice plane measurements, respectively. Density was measured on polycrystalline MgO by the X-ray diffraction technique. Results from this study were compared with the previously reported values. Further, the present results were converted to the isothermal bulk moduli and, then compared with the published data available including the energy dispersive X-ray diffraction result which was performed on the same single crystal MgO. The principle and techniques ultrasonic interferometry were introduced too.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.2
• /
• pp.564-574
• /
• 1996

This paper describes as Electronic Speckle Pattern Interferometry system which has been designed for measuring vibration patterns and quantitative measurement of vibration amplitude fields by using the time average method on a object. Visbility of fringe patterns is more improved by using the phase stepping and frame average method to reduce speckle and electric noise. And a bias vibration is introduced into the reference beam to shift the $\frac{2}{0}$ fringes so that fringe shift algorithms can be used to determine vibration amplitude. The experimental results are compared to those of the FFT analyzer and the FEM model analysis.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.5
• /
• pp.19-23
• /
• 2004

최근 산업의 고도화와 함께 초고온, 방사선노출 등과 같은 극한환경에서 사용되는 구조물과 MEMS 와 같은 미소 구조물(Hicrostructure)이 많아지고 있으며, 이들의 변형해석을 위한 기존의 접촉식 기법들은 그 한계를 극복해야 할 필요가 있다 해결방안으로 레이저를 이용한 비접촉 측정방식이 많은 발전을 해오고 있으며, 특히, 스페클간섭법(Speckle inteferometry)기반의 변형해석 기술이 가장 뛰어난 기술로 인정받고 있다. 스페클간섭법은 컴퓨터 화상처리기술에 힘입어 전자처리 스페클간섭법(Electronic Speckle Pattern Interferometry : ESPI)으로 발전을 하고 있으며, 자동차와 같은 대형구조물의 변형해석에서 MEMS 구조물과 같은 미소구조물 변형해석까지 그 적용범위가 매우 넓다. 본 논문에서는 ESPI 를 이용한 변형해석분야의 국내외 기술현황 및 적응사례, 발전방향를 소개하였다.(중략)

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.1
• /
• pp.92-99
• /
• 1997

Nowadays, Electronic Speckle Pattern Interferometry is a well-established measuring technique with a wide range of industrial applications, particularly in the fields of deformation measurement and vibration analysis. Comparing with holographic interferometry, it has some attractive features, which are rapid recording and reconstruction, satisfiable automation etc. The Time-Average ESPI is used to provide vibration mode shape of an object whose vibration amplitude is given as a fringe pattern. Its merit is rapid and simple measurement for vibrating object. However, it is not possible to determine the direction of motions of a point on the object at any given time, because it does not give any information about the phase of vibration. But, Stroboscopic ESPI can measure the amplitude and phase of vibrating surface. In this paper, loudspeakers were tested by these two methods. As a result, we can assume that these techniques will be applied directly in the loudspeaker industry.