• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.3
• /
• pp.663-668
• /
• 2016

Without the interference of man in traditional single-device control system P2M way to control the device by a person to the development of the Internet of Things it was changing the way the M2M communication between devices possible. The attention of the user on the IoT to this development, but this increase was caused problems the system is insufficient to help the understanding of the IoT technologies to meet them. Therefore, to understand the operation of the IoT technology system that can easily expressed is required. In this paper, we design and implement a simulation system that can monitor the process of relationships between devices, such as when a user event occurs, the sensor, SNS and the XML-based collaboration to meet users' needs. Further, the respective functions for the maintenance and updating of the simulation system is proposed to make API.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.1
• /
• pp.159-166
• /
• 1999

In this paper, we examined noise figure and the 3rd order intercept point in sensitivity single tone desensitization, and response attenuation by intermodulation spurious of receiver and also analyzed them through simulation based on J-STD-0.18, which is the minimum specification of PCS mobile station. The result of simulation was as follows ; In sensitivity specification, the total noise figure was 5.99dB and the 3rd order intercept point was -33.979dB. Ins ingle tone desensitization and intermodulation spurious response attenuation specification, the total noise figure was 6.375dB and the 3rd order intercept point was -26.99dBm. When there is an interference tone, the nosie figure and the 3rd order intercept point have been increasedly 0.367dB respectively, compared wit that of no interference tone. Because the amount of increase in the 3rd order intercept point was highly raised more than that of noise figure, mixer, closely related to interference tone should be specified in high 3rd order intercept point. At a frequency spacing of 1.25MHz and 2.05MHz from center frequency in IF SAW filter, attenuation should be more than 45dB.

• Korean Journal of Optics and Photonics
• /
• v.23 no.4
• /
• pp.159-166
• /
• 2012

We have developed a daytime measuring rotational Raman LIDAR system for temperature measurement. To decrease the background signal from sunlight, we have designed and installed narrow band (0.5 nm) and high rejection ($10^{-6}$) rate band pass filter system using a grating and an interference filter. We calibrated our system by comparing our horizontal temperature profile and KMA (Korea Meteorological Administration) data. We have found that our temperature profile has a good correlation with KMA data within our theoretically expected variance. And we have used these calibration values in obtaining a vertical temperature distribution. To check our system, we also have compared our vertical temperature data with US standard atmospheric temperature profile. We also have compared our temperature profile with sonde data.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.1
• /
• pp.94.1-94.1
• /
• 2012

천리안위성은 우리나라 최초의 정지궤도복합위성(COMS: Communication, Ocean, and Meteorological Satellite)으로 2010년 6월 27일, 남미 기아나 쿠루기지에서 아리안-5 로켓에 의해 발사된 후 동경 128.2도, 적도 상공 약 35,800 km 고도의 정지궤도에 안착되었다. 이 후 궤도상시험 기간과 안정화 기간을 거쳐 2011년 4월 1일, 기상청은 위성자료 서비스를 시작하였다. 천리안위성의 기상영상기는 한반도 주변의 기상변화와 전 지구적 기후 변화 및 대기 운동을 감시하기 위해 실시간 관측 및 전송 시스템을 갖춘 탑재체이다. 이 기상영상기는 하루 8번의 지구 반면 영역과 각각 80번 내외의 북반구 및 한반도 영역을 관측하며, 이 자료는 지상에서 복사보정과 기하보정을 거친 후 위성을 통해 다시 사용자에게 배포된다. 천리안위성 기상영상기는 쉼 없이 관측하고, 일정 시간 이내에 그 자료를 배포해야 한다. 이러한 자료서비스는 운영시스템의 장애나 자연현상에 의한 자료 미수신 혹은 미처리가 발생할 경우 운영 결과 및 성과에 영향을 미친다. 이와 같은 장애에 대비해 국가기상위성센터는 이중화된 시스템을 구축했으며, 자료 백업 부기관으로서 한국항공우주연구원과의 사이트 이중화도 시행하고 있다. 그러나 정지궤도에 있는 위성과 태양 및 지구의 역학적인 관계에 따라 태양 전파 잡음의 영향인 태양간섭과, 위성 태양전지판 충전 장애를 일으킬 수 있는 위성식, 그리고 위성 자정 주변에 발생할 수 있는 태양광 침입 및 산란광 영향 등은 미리 예측되어야 하며, 이 시기 운영 방안 마련과 사용자 공지 등의 조치가 수반되어야 한다. 국가기상위성센터는 춘 추분 시기에 발생하는 이러한 태양 영향을 예측하고 검증했으며, 이 시기 위성 및 지상국의 효율적인 운영방안을 마련하였다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.2
• /
• pp.137-143
• /
• 2008

The spherical glasses lenses are typically classified into two groups such as (+) diopter lens and (-) diopter lens by the refractive power index. The thermal deformation of a lens is occurred by external heat source and is changed respected to the diopter of a lens. In this paper, the thermal deformation of spherical glasses lenses were quantitatively measured by using ESPI (electronic speckle pattern interferometry) which has an advantage that the non-contact, non-destructive and precise deformation measurement is available due to the coherency characteristic. The temperature changes were measured by IR camera. It makes experiments over 14 types of the plastic glasses lenses. From the results, it was confirmed that the larger diopter lens showed the less thermal deformation in case of the (+) diopter lens. On the other hand, the thermal deformation of the (-) diopter lens was measured with uniform pattern when the same temperature changes were applied. Also, it was found that the thermnal deformation of the (+) diopter lens is less than that of the (-) diopter lens. Therefore, it is expected that when the thermal deformation is occurred to the various types of the lens, the variation of the focal length caused by the thermal distortion of a lens would be measured quantitatively.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.4
• /
• pp.15-22
• /
• 2004

This paper presents the channel analysis considering power distribution network(PDN) system of PCB. For achieve the target PDN system we proposed the useful design approach for acquiring the characteristic target of power distribution network in overall frequency ranges. The proposed method is based on the hierarchical approach related to frequency ranges and the path-based equivalent circuit model to consider the interference of the current paths between the decoupling capacitors and the board through it is a lumped model for fast and easy calculation, experimental results show that the proposed model is almost as precise as the numerical analysis. The analysis of PDN system shows that although the effective inductance of package dominatly affects the power noise and the signal transfer through data channel, the board PDNs also can not be neglected for achieving the accurate channel signaling. Therefore, we must design concurrently the chip, package, and board from the initial spec design of high speed digital system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.2
• /
• pp.189-197
• /
• 2013

With the trend of technological advances in electronic communications and the advent of ubiquitous environments, the density of existing electronic equipment in the surroundings is increasing significantly. It is hence great importance to study the numerically efficient and fast algorithm for complex and large environments to identify their electromagnetic compatibility and interference characteristics of equipments installed in those structure. This paper introduces a statistical-based power balance method(PWB) for the analysis of these problems and considers its practical utility. The 2-dimensional lossy rectangular cavity was numerically revisited to clarify its relationship with the classical deterministic analysis solutions based on the Maxwell's equation. It can be shown that the statistical assumptions and analysis results from the power balance method correspond to the volume average over the realistic deterministic domain. This statistical power balance approach should be a sufficiently practical alternative to the electromagnetic problem of complex and large environment since it is apparent that the full-wave analysis methods have some severe limits of its computational burdens under the situation of complex and large environment.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.10
• /
• pp.745-751
• /
• 2018

This paper reports on the design of a multiband multiple-input and multiple-output(MIMO) antenna for long-term evolution(LTE) vehicular communication and includes an analysis of the throughput field test results that were acquired by mounting the antenna to a vehicle. The antenna used for the field test was designed as a planar structure and included multiple stubs to obtain multiband resonant characteristics operating in the LTE(0.8~0.9 GHz, 1.7~2.2 GHz), Wi-Fi(2.4~2.48 GHz), and wireless access in vehicular environments (WAVE)(5.8~5.9 GHz) frequency bands. For the field test, antenna prototypes were mounted on the dashboard and roof of a vehicle and connected to the experimental LTE modem. The data transfer rate(throughput), signal-to-interference-plus-noise ratio(SINR), and reference signal received quality(RSRQ) were measured and analyzed in various real-world radio wave environments. Based on these results, the relationship between the SINR and throughput according to the field intensity is confirmed.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.2
• /
• pp.345-350
• /
• 2008

In children with Class III malocclusion, it is important to identify whether the etiology is functional, dental, skeletal. FR-III developed by Rolf Frankel in 1970, has been used during deciduous, mixed, and early permanent dentition to correct class III malocclusion characterized by maxillary skeletal retrusion. According Frankel, the vestibular shields and upper labial pads act to counteract the forces of the surrounding musculature that restrict forward maxillary development and cause a retrusion in maxillary tooth position. This can achieve favorable developments with the basal bone, teeth and alveolar bone. We report FR-III that can be applicated in cases of early mixed dentition with mild maxillary deficiency and deepbite before the eruption of permanent maxillary incisor.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.369-372
• /
• 2003

This paper describes a design of OFDM (Orthogoanl Frequency Division Multiplexing) based wireless LAN system receiver, defined in IEEE 802.11a standards. Because OFDM system uses several orthogonal sequence sets, it ran avoid selective fading of fast data transfer problem when it is used with error correction code. But if the receiver is not synchronized, the orthogonal of between sub-ralliers will be destroyed and the data interruption will be generated. So it makes error property get worse very murk. For improving the noise error, we use the relationship of phasor between sub-carriers and make system synchronization using one tab equalizer. The designed OFDM block is described by Verilog HDL for the efficient and small size hardware. And we preform the functional verification and evaluation using the vector of standards.