• Title/Summary/Keyword: 간략식

Search Result 139, Processing Time 0.027 seconds

Comparison of IUHs obtained by the Derived and Simple Equation of GIUH on Third and Fourth-Order Streams (3, 4차 하천에서의 GIUH 유도식과 간략식에 의해 산정된 순간단위도의 비교연구)

  • Joo, Jin-Gul;Ham, Dae-Heon;Jun, Hwan-Don;Lee, Jung-Ho;Kim, Joong-Hoon
    • Journal of Korea Water Resources Association
    • /
    • v.41 no.11
    • /
    • pp.1107-1121
    • /
    • 2008
  • The simple equation of GIUH are frequently used in many researches instead of the derived equation of GIUH. However it is still unknown whether the simple equation of GIUH is adaptable for estimating IUHs for basins with various geomorphologic conditions. To verify the applicability of the simple equation of GIUH, in this research, four basins which were Bangrim, Sanganmi, Museong, and Byeongcheon were selected and each basin was assumed as the third and fourth stream order basin according to variable resolutions. After than, IUHs were estimated using the derived and simple equations of GIUH. Eight to sixteen hydrographs were estimated from the each IUH, compared with observed graphs. In case of that the basin is assumed as a third order stream, the derived equation underestimated the peak flows while the simple equation overestimated them. When the basin is assumed as a fourth order stream, the simple equation generally overestimated the peak flows whereas the derived equation produced peak flows good agreement with the observed peak flow. Moreover, the simple equation showed various deviations in accuracy whereas the derived equation produced stable results. Based on the fact found from this research, it can be concluded that the derived equation of GIUH brings better results than the simple equation of GIUH to estimate IUHs for ungauged basins.

Extended QEM for Surfaces Simplification Algorithm (메쉬 간략화를 위한 확장 QEM 알고리즘)

  • 김수균;김선정;김창헌
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2001.04b
    • /
    • pp.610-612
    • /
    • 2001
  • 본 논문은 이산 곡률을 확장된 QEM(Quadric Error Metrics)으로 변환한 새로운 메쉬 간략화 알고리즘을 제안한다. 이산 곡률이란 이산적인 표면으로 구성된 메쉬 표면의 곡률이며, 기하학 정보만을 이용하여 계산 가능하다. QEM은 간략화 오차를 평면과 한 점과의 거리 제곱의 합인 이차식으로 표현함으로써 빠른 간략화를 수행한다. 본 논문은 모서리 간략화 수행 시의 새로운 점과 주변 평면과의 거리 뿐만 아니라, 그 점에서의 이산 곡률을 계산한다. 즉, 간략화 오차에 거리와 곡률을 함께 고려하여 이차식으로 표현함으로써 빠르고 높은 품질의 간략화가 수행 가능하다.

  • PDF

Simplified Load Distribution Factor Equation for the Design of Composite Steel Girder Bridges (강합성교 설계를 위한 하중분배계수 간략식)

  • Chung, Wonseok
    • Journal of Korean Society of Steel Construction
    • /
    • v.17 no.2 s.75
    • /
    • pp.131-138
    • /
    • 2005
  • The AASHTO wheel load distribution factor (LDF) equation has been with us since 1931 and has undergone minor modifications. In 1994, an entirely new procedure was introduced in the AASHTO LRFD code based on parametric studies and finite element analyses. However, this LDF equation involves a longitudinal stiffness parameter, the design of which is not initially known. Thus, an iterative procedure is required to correctly determine the LDF value. The increased level of complexity puts undue burden on the designer resulting in a higher likelihood for misinterpretation and error. In this study, based on current AASHTO LRFD framework, a new simplified equation is developed that does not require an iterative procedure. A total of 43 representative composite steel girder bridges are selected and analyzed using a finite element model.The new simplified equation produces LDF values that are always conservative when compared to those obtained from the finite element analyses and are generally greater than the LDF obtained using AASHTO LRFD specification. Therefore, the proposed simplified equation is expected to streamline the determination of LDF for bridge design without sacrificing safety.

A Simplified Formula of Bridge Deck Flutter Based on the Quasi-Steady (준정상 이론에 의한 교량 플러터의 간략식)

  • Cho, Young-Rae;Cho, Jae-Young;Lee, Hak-Eun
    • 한국방재학회:학술대회논문집
    • /
    • 2008.02a
    • /
    • pp.295-298
    • /
    • 2008
  • 유체내에 잠겨있는 물체의 진동은 공기력을 유발시키며 이러한 공기력에 의해 발생되는 진동을 물체의 거동에 의해 발생되는 가진이라 한다. 또한 물체에 작용하는 외부 공기력이 없이도 물체의 주기적인 움직임에 의해 발생되는 에너지로부터 공기력을 생성시킨다. 이러한 메커니즘에 의해 생성되는 공기력을 공기자발력(self-excited force) 이라 하며 교량의 내풍안정성과 관련이 있다. 본 논문에서는 MIE 메커니즘에 의해 발생되는 플루터 현상을 수학적으로 살펴보고, 단일모드에 대한 플러터계수를 이용한 플러터 발생풍속 산정식을 유도하였다. 또한 준정상 이론을 적용하여 단일모드에 대한 플러터 발생 예측식을 간략화하였다. 제안된 식의 플러터 발생풍속을 구조물의 진동수비가 서로 다른 3개의 $\pi$형 단면에 대해 검토하였다.

  • PDF

A Suggestion of Simplified Load Formula for Blast Analysis (폭발해석을 위한 간략 폭발하중 제안식)

  • Jeon, Doo-Jin;Han, Sang-Eul
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.29 no.1
    • /
    • pp.67-75
    • /
    • 2016
  • In this paper, a pressure-time history curve of blast load and Conwep model are presented, and a simplified blast load formula is suggested. Generally, a blast load are applied as a pressure-time history curve, and it is calculated by blast load formula such as Conwep model. The Conwep model which is used in most of the blast analysis is quiet difficult to calculate because of its complex process. Therefore, a simplified formula is proposed to calculate blast load by simple rational expressions and to make a simplified pressure-time history curve. In this process, a curve fitting method was used to find the simple rational expressions. The calculation results of the simplified formula have an error of less than 1% in comparison with the Conwep model. And, blast analyses using finite elements method are accomplished with the Conwep model and simplified formula for verification.

Design and Implementation of Intelligent Tutoring Systems for Problem Based Learning (문제중심학습을 위한 지능형 교수 시스템 설계 및 구현)

  • Jeong, Un-Sun;Choi, Yong-Suk
    • Proceedings of the Korean Information Science Society Conference
    • /
    • 2005.11b
    • /
    • pp.808-810
    • /
    • 2005
  • 문제중심학습은 학습자 스스로의 통제에 의한 학습자 중심의 자기주도적 학습이 특징이므로 학습자의 적극적인 참여를 유도하기 위하여 학습과점에 적절한 전략이 필요하다. 본 논문의 학습내용은 논리식 간략화이며, 학습자의 적극적인 참여 유도를 위하여 논리식 간략화 과정과 결과에 대한 즉각적인 피드백을 제공하는 지능형교수시스템(Intelligent Tutoring Systems)을 구현한다. 피드백에 관련된 알고리즘을 지능적으로 제공하기 위하여 논리식 간략화 알고리즘은 Tabulation Method를 이용한다. 본 논문의 지능형교수시스템(ITS)을 학습에 적용하면 논리식의 간략화 과정식과 결과 식에 대한 정오 판정은 물론 학습 활동에 맞아 떨어지는 즉각적인 피드백이 제공되므로 학습자 스스로 학습내용에 대한 인지도를 확인할 수 있다. 또한 학습 활동에 꼭 필요한 피드백을 제공하므로 학습에 대한 흥미를 유발시키고 지속화하여 적극적이 학습참여와 완전학습이 가능하다.

  • PDF

Determination of Outlet Location for GIUH Application in Un-Gauged Basins (적정 유역출구 결정을 통한 GIUH 적용성 향상 연구)

  • Yang, Jae-Mo;Joo, Jin-Gul;Kim, Joong-Hoon
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2010.05a
    • /
    • pp.13-17
    • /
    • 2010
  • Rodriguez-Iturbe and Valdes(1979)가 제안한 지형형태학적 순간단위도(Geomorphologic Instantaneous Unit Hydrograph, GIUH)는 미계측유역에서 지형인자만으로 단위도를 구할 수 있는 장점이 있으나 최고차 하천길이에 따라 단위도의 첨두가 민감하게 영향을 받는다. 그렇기 때문에 적절한 유역출구의 선정이 중요하다. 본 연구에서는 미계측 유역에서 GIUH를 사용하여 단위도를 산정하는 경우, 유역출구를 결정할 수 있는 기준을 제시하고자 한다. IHP 대표유역인 평창강의 상안미 유역에 대하여 유역출구에서부터 최고차 하천길이를 줄여가며 12개 지점을 선정하였으며 GIUH식과 간략식을 사용하여 각 지점에서의 단위도를 산정하였다. 그 결과 최고차 하천의 길이가 11.02km, 총 유하길이의 67%이상인 지점의 단위도는 일정한 첨두값을 주었다. 그러나 최고차 하천의 길이가 이보다 짧은 지점에서는 단위도의 첨두가 150%-3,000% 크게 산정되었다. 본 연구를 통해 미계측유역에서 GIUH를 적용할 때 적절한 유역출구를 결정할 수 있는 기준이 제시될 것이며, 이를 통해 GIUH 모형의 정확성이 향상될 수 있을 것으로 판단된다.

  • PDF

Development of Simple Equation for Average Velocity of River (하천 평균유속에 대한 간략식의 개발)

  • Hwang, Shin Bum;Kim, Yeon Su;Jung, Tae Ho;Kim, Sang Ho
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2017.05a
    • /
    • pp.520-520
    • /
    • 2017
  • 하천 내의 호안, 제방, 수공구조물 등의 안정성을 검토하기 위한 인자로 대부분 유속 또는 소류력을 이용하게 된다. 이 중 유속의 경우 보통 현장측정이나 수리모형 해석을 통하여 도출되나, 두 가지 방법 모두 많은 인력과 시간이 요구되며, 하천정보 수집 및 수리모형에 대한 전문성의 필요 등 여러가지 제약사항을 가지게 된다. 최근 국내에서는 평균유속을 간단하게 도출할 수 있는 연속형 Kraven 공식이 실무에서 주로 적용되고 있으나, 경사에 의해서만 평균유속이 산정되어 유량의 변화에 따른 유속 변화가 나타나지 않는 문제점을 내포하고 있다. 본 연구에서는 기존의 연속형 Kraven 공식에 대한 문제점을 개선하고, 유속을 간략하게 도출할 수 있도록 평균유속 산정식을 개발하였다. 산정식은 하천 내의 유량과 경사를 활용하였으며, 1차원 수리모형 해석 결과와의 비교를 통하여 정확성과 적용성을 검토하였다.

  • PDF

Enhanced Mesh Simplification using Extended Quadric Error Metric (확장된 이차오차 척도를 이용한 개선된 메쉬 간략화)

  • Han Tae-hwa;Chun Jun-chul
    • The KIPS Transactions:PartA
    • /
    • v.11A no.5
    • /
    • pp.365-372
    • /
    • 2004
  • Recently, the studies for mesh simplification have been increased according to the application area of the complicate 3D mesh models has been expanded. This paper introduces a novel method for mesh simplification which uses the properties of the mesh model in addition to the geometric locations of the model. The information of the 3D mesh model Includes surface properties such as color, texture, and curvature information as well as geometic information of the model. The most of current simplification methods adopt such geometric information and surface properties individually for mesh simplification. However, the proposed simplification method combines the geometric information and solace properties and applies them to the simplification process simultaneously. In this paper, we exploit the extended geometry based quadric error metric(QEM) which relatively allows fast and accurate geometric simplification of mesh. Thus, the proposed mesh simplification utilizes the quadric error metric based on geometric information and the surface properties such as color, normal, and texture. The proposed mesh simplification method can be expressed as a simple quadric equation which expands the quadric error metric based on geometric information by adding surface properties such as color, normal, and texture. From the experimental results, the simplification of the mesh model based on the proposed method shows the high fidelity to original model in some respects such as global appearance rather than using current geometry based simplification.

Courseware for Factorization of Logic Expressions (논리식 인수분해를 위한 코스웨어)

  • Kwon, Oh-Hyeong
    • The Journal of Korean Association of Computer Education
    • /
    • v.15 no.1
    • /
    • pp.65-72
    • /
    • 2012
  • Generally, a logic function has many factored forms. The problem of finding more compact factored form is one of the basic operations in logic synthesis. In this paper, we present a new method for factoring Boolean functions to assist in educational logic designs. Our method for factorization is to implement two-cube Boolean division with supports of an expression. The number of literals in a factored form is a good estimate of the complexity of a logic function. Our empirical evaluation shows the improvements in literal counts over previous other factorization methods.

  • PDF