• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.8
• /
• pp.119-126
• /
• 2016

In this paper, we proposed the planar textile resonator for constructing wearable MR-WPT system and analyzed the characteristic of textile substrates used in resonators. The planar textile resonators were designed to resonate at 1-10 MHz. The loop and coil were fabricated planar structure on textile substrate using conductive materials. Polyester fiber and cotton widely used in real life were chosen as textile resonators for wearable applications and copper tape and silver paste were used for fabricating planar loop and coil on textile substrate. For comparison analysis on transfer efficiency according to the types of textile, transmitter and receiver parts were symmetric. According to the result, for the highest transfer efficiency of wearable WPT system, the planar resonators have specifications of relative thick textile substrate with low permittivity and low surface resistance of conductive pattern. The performed experiments show that the planar textile resonator is possible to be used for resonator in wearable MR-WPT system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.6
• /
• pp.1487-1493
• /
• 2008

In order to investigate the cooling capacity of multi-heat pump applying an inverter compressor, the experiment on the cooling performance characteristics of heat pump with 3 indoor units was performed under the cooling standard and cooling low-temperature conditions. The system data were measured by the psychrometric calorimeter. The operation characteristics and the behavior of the cooling cycle of the heat pump with 3 indoor units were understood from the cooling capacity, COP, and P-h diagram by indoor-unit combination. The operating load and performance of the multi-heat pump depends on the indoor-unit combination. The cooling capacity and COP of the low temperature condition were larger than those of the standard one. Also the cycle was analyzed by using P-h diagram.

• Journal of Energy Engineering
• /
• v.21 no.2
• /
• pp.124-132
• /
• 2012

This study presents the simulation results of Photopia when a lecture room with north-facing windows were illuminated by two different types of daylighting systems to improve the imbalance in its lighting conditions. Especially, the candela power distribution curves (CDCs) on a clear sunny day at the summer solstice, reaching $80^{\circ}$ in solar altitude, were analyzed with respect to the illuminance available at task areas (work planes). The difference between its illuminance on the north and south areas exceeded 1,000 lux without any daylighting system. This, however, decreased drastically with the application of a daylighting system. When a light tube system was introduced, it reduced from 906lx to 603lx and, even further to 308lx with the application of a dish concentrator system. Generally, the performance of a light tube system was greatly influenced by solar altitude while its effect on the dish concentrator system was rather negligible.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.7
• /
• pp.3-9
• /
• 2013

This paper proposes a selective-weighted energy detection (S-WED) and a synchronization algorithm appropriate for it in IR-UWB system. Energy detectors that are practical in terms of implementation are employed widely for noncoherent reception in IR-UWB systems. However, they show low performance due to using the energy samples captured at symbol rate. For this reason, weighted energy detectors are developed to improve the performance of EDs. Hence, for WED, not only synchronization but also the weight coefficients are needed to be obtained prior to data detection. Meanwhile, the optimal weighting coefficients of WEDs are known to be energy values. Therefore, synchronization and the weighting coefficients can be obtained simultaneously. This paper proposes an S-WED and a simple synchronization algorithm for it in which sub-intervals having energies under a certain level are excluded in energy accumulation resulting in a simpler WED with a bit performance increase in low SNR region. The proposed algorithm is verified through simulations using the preamble symbol and channel models defined in the IEEE 802.15.4a.

• Information Systems Review
• /
• v.4 no.1
• /
• pp.89-110
• /
• 2002

Today, many universities are confronted with the changing education paradigm such as e-Learning, CBT(Computer-based Training), Virtual University. Particularly, the Virtual University is now in the countrys educational mainstream as a legitimate, potentially standards-setting educational environment. These streams are certainly a new opportunity or threat to our universities. To overcome this problem, we should think this as strategic, and should implement IT-based Virtual University System to which computer and network technology is main edge. So, we think that the Virtual University System is SIS(Strategic Information System) which support universitys future education strategies. We proposed a planning framework for the Virtual University System. The framework which is based on the IS planning methodology is composed of such as environment analysis, requirement analysis of the system, strategic roles and objectives setting, scenario analysis of budget and revenue. To define the strategic roles and objectives of the system, we surveyed it on the side of instructors. We proposed five factors, which are to (1) improve competitiveness (2) reduce cost and secure profit (3) enhance education services (4) change the future education model (5) decrease dysfunctions of virtual education model.

• Annual Conference on Human and Language Technology
• /
• 2018.10a
• /
• pp.285-290
• /
• 2018

논지가 높은 설득력을 갖기 위해서는 충분한 지지 근거가 필요하다. 논지 내의 주장을 논리적으로 지지할 수 있는 근거 자료 추출의 자동화는 자동 토론 시스템, 정책 투표에 대한 의사 결정 보조 등 여러 어플리케이션의 개발 및 상용화를 위해 필수적으로 해결되어야 한다. 하지만 웹문서로부터 지지 근거를 추출하는 시스템을 위해서는 다음과 같은 두 가지 연구가 선행되어야 하고, 이는 높은 성능의 시스템 구현을 어렵게 한다: 1) 논지의 주제와 직접적인 관련성은 낮지만 지지 근거로 사용될 수 있는 정보를 확보하기 위한 넓은 검색 범위, 2) 수집한 정보 내에서 논지의 주장을 명확하게 지지할 수 있는 근거를 식별할 수 있는 인지 능력. 본 연구는 높은 정밀도와 확장 가능성을 가진 지지 근거 추출을 위해 다음과 같은 단계적 지지 근거 추출 시스템을 제안한다: 1) TF-IDF 유사도 기반 관련 문서 선별, 2) 의미적 유사도를 통한 지지 근거 1차 추출, 3) 신경망 분류기를 통한 지지 근거 2차 추출. 제안하는 시스템의 유효성을 검증하기 위해 사설 4008개 내의 주장에 대해 웹 상에 있는 845675개의 뉴스에서 지지 근거를 추출하는 실험을 수행하였다. 주장과 지지 근거를 주석한 정보에 대하여 성능 평가를 진행한 결과 본 연구에서 제안한 단계적 시스템은 1,2차 추출 과정에서 각각 0.41, 0.70의 정밀도를 보였다. 이후 시스템이 추출한 지지 근거를 분석하여, 논지에 대한 적절한 이해를 바탕으로 한 지지 근거 추출이 가능하다는 것을 확인하였다.

• The KIPS Transactions:PartB
• /
• v.10B no.6
• /
• pp.711-718
• /
• 2003

In this paper, we propose a robust face tracking algorithm. It is based on Condensation algorithm [7] and uses skin color and facial shape as the observation measure. It is hard to integrate color weight and shape weight. So we propose the method that has two separate trackers which uses skin color and facial shape as the observation measure respectively. One tracker tracks skin colored region and the other tracks facial shape. We used importance sampling technique to limit sampling region of two trackers. For skin-colored region tracker, we propose an adaptive color model to avoid the effect of illumination change. The proposed face tracker performs robustly in clutter background and in the illumination changes.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10a
• /
• pp.475-478
• /
• 2006

실감형 게임은 사람의 신체 움직임 및 오감을 최대한 반영한 리얼리티를 추구하는 전문적인 게임이다. 현재 개발된 실감형 게임들은 비 장애우를 대상으로 만들어 졌기 때문에 많은 움직임을 필요로 한다. 하지만 신체적 불편함을 가진 장애우들은 이러한 게임들을 이용하는데 어려움이 있다. 따라서 본 논문에서는 PC상에서 최소의 얼굴 움직임을 사용하여 수행할 수 있는 실감형 게임 시스템을 제안한다. 제안된 실감형 게임 시스템은 웹 카메라로부터 얻어진 영상에서 신경망 기반의 텍스쳐 분류기를 이용하여 눈 영역을 추출한다. 추출된 눈 영역은 Mean-shift 알고리즘을 이용하여 실시간으로 추적되어지고, 그 결과로 마우스의 움직임이 제어된다. 구현된 flash게임과 연동하여 게임을 눈의 움직임으로 제어 할 수 있다. 제안된 시스템의 효율성을 검증하기 위하여 장애우와 비 장애우로 분류하여 성능을 평가 하였다. 그 결과 제안된 시스템이 보다 편리하고 친숙하게 신체 장애우 에게 활용 될 수 있으며 복잡한 환경에서도 확실한 얼굴 추적을 통하여 실감형 게임 시스템을 실행 할 수 있음이 증명되었다.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.7
• /
• pp.56-66
• /
• 1999

Thermoacoustic oscillation is a significant problem in cylindrical-type combustors such as common internal combustion engines, industrial furnaces, gas turbine, etc. This kind of low frequency oscillation can lead to serious consequences such as destruction of the combustor and production of strong noise. The accurate numerical simulation of thermoacoustic phenomena is a complex and challenging problem, especially when considering the chemical reaction of mixtures. As with other simulations of aerodynamics and aeroacoustics, the direct computation of thermoacoustic phenomena requires that Navier-Stokes equations be solved using accurate numerical differentiation and time-marching schemes, with non-reflecting boundary conditions. The numerical approach used here aims at qualitative analysis and efficient prediction of those problems, not at the development of an accurate scheme. The numerical prediction developed in this work is shown to be reasonably matched with experimental result.

• Proceedings of the KIPE Conference
• /
• 2015.11a
• /
• pp.155-156
• /
• 2015

본 논문은 마이크로그리드의 seamless mode transfer 를 위한 부하 위치에 따른 고조파 보상 기능을 가진 간접 전류 제어기법을 다루고 있다. 분산 발전 기반의 마이크로그리드는 계통 연계 모드와 독립 운전 모드시 각각 전류 제어기와 전압 제어기로 정의되며 각 모드에서 고품질의 전력공급을 위하여 강인한 제어기가 필요되어진다. 이때 계통 왜곡이나 비선형 부하의 연결등은 시스템의 전력 품질 악화를 초래할 수 있으며 이러한 문제를 해결하고자 많은 연구가 진행되었다. 본 논문에서는 계통연계 모드 뿐만 아니라 독립 운전 모드에서도 사용 가능한 비례공진 제어 기반의 간접 전류 제어기법을 제안하였고 부하 위치에 따른 고조파 보상 기법과 안정적인 모드변환을 동시에 고려하였다. 또한 비례 공진 제어기의 실용적인 모델을 사용함으로 인해 때때로 야기되는 독립 운전시의 전압 크기 감소에 대한 대책으로 적용이 간편한 전압 회복 기법도 추가되었다. 결과적으로 비선형 부하를 공급하기 위한 제안된 방식은 계통 연계와 독립 운전 모드에서 안정적인 전력 공급과 모드 절환 특성을 가짐을 PSIM 시뮬레이션을 통해 입증되었다.