• KIPS Transactions on Software and Data Engineering
• /
• v.7 no.11
• /
• pp.443-450
• /
• 2018

Crohn's disease, which is recently increasing in Korea, may be seen throughout the gastrointestinal tract and cause various symptoms. In particular, Crohn's disease is especially difficult to diagnose with several symptoms similar to other ulcerative colonic diseases. Thus, some studies are underway to distinguish two or more similar diseases. However, the previous studies have not described the procedural diagnosis process of it, which may lead to over-examination in the process. Therefore, we propose a diagnosis process of Crohn's disease based on the analysis of redundancy, sequential linkage and decision point in the diagnosis of Crohn's disease, so that it enables to identify ulcerative colonic diseases with symptoms similar to Crohn's disease. Finally, we can distinguish the colon diseases that have symptoms similar to Crohn's disease and help diagnose Crohn's disease effectively by defining the proposed process-oriented association as an ontology. Applying the proposed ontology to 5 cases showed that more accurate diagnosis was possible and in one case it could be diagnosed even with fewer tests.

• Composites Research
• /
• v.32 no.4
• /
• pp.171-176
• /
• 2019

In this paper, the strength of the composite securement device was characterised by FE analysis. Preliminary frontal crash analysis for the vehicle, equipped with the conventional steel securement device, was carried out according to the ISO 10542 for special transportation to obtain loading data, which were applied to securement device during crash. The securement device consists of block, guide and rail and the weight fraction of rail was the highest among them, therefore, it is desirable to reduce weight of rail by applying carbon/epoxy composite. Also, it was found that 27% of lightweight effect was obtained by hybrid rail that bottom part was replaced by a composite compared to the conventional rail, i.e., made of SAPH 440, without sacrificing the structural strength.

• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.4
• /
• pp.35-40
• /
• 2018

Simple and useful synthetic process to control the morphology of block copolymers (BCPs) is required for implementation in various device applications. However, the conventional method to use colloidal templates is not enough to realize the production of pure and massive core-shell nanoparticles due to the cost-intensive complex process. Here, we introduce a novel and facile synthesis method to realize the formation of core-shell $SiO_x$ nanoparticle power by employing an immersion annealing of a sphere-forming poly(styrene-b-dimethylsiloxane) (PS-b-PDMS) BCP. We successfully obtained a PS-encapsulated $SiO_x$ nanoparticle with a diameter of ~20 nm. In addition, we analyzed how the mixing ratio of heptane/ethanol affects the BCP morphology of self-assembled PS-b-PDMS nanoparticles, showing a worm-like structure under the optimum immersion conditions. This useful approach is expected to be extendable to other solvent-based BCP synthesis, providing a new guideline for unique BCP production.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.104-104
• /
• 2016

소규모 하천에서의 평수기 유량 측정은 일반적으로 지점식 초음파 유속계, 프로펠러 유속계 등을 활용해 도섭법으로 측정된 유속 측정성과를 기반하여 유속-면적법으로 산정된다. 유속-면적법으로 측정된 유량 측정 성과는 횡방향 측선의 수, 수심방향 측점의 수, 측정 시간, 수심 등 제반 측정 인자에 의해 영향을 받고 유량 불확도는 각 인자 별 오차에 영향을 받는다. ISO 748 (2007)과 ISO 1088 (2007)은 유속-면적법 적용방법, 현장 측정 가이드라인, 불확도 인자 별 적용 요건에 따른 오차, 최종 유량 불확도 산정 기법을 제시하였다. 따라서, 국내외 유량조사 기관에서는 유속면적법을 적용할 경우, ISO에서 제시된 인자 별 오차 및 유량 불확도 산정 기법을 기반으로 유량 불확도를 산정해왔다. ISO 748과 1088은 다양한 규모의 실제 하천에서 관측된 자료를 기반으로 횡방향 측선 수, 수심방향 측점 수 (2점법, 3점법 등), 측정 시간 등과 관련된 인자 별 오차를 표로 상세하게 제시하였고 실무에서는 별도 추가 검증없이 사용해 왔다. 그러나, ISO에서 유속-면적법 유량 측정 불확도를 평가하기 위해 사용된 측정자료는 유량을 제어하기 힘들고 유속 측정 상황이 유출 조건 별로 상이한 현장 자료를 기반으로 하였고, 상대적으로 정확도가 낮은 프로펠러유속계를 기반으로 1960년대에 관측된 자료들을 주로 활용하여 도출되었다. 따라서, 본 연구에서는 기존 ISO에서 제시한 유속-면적법에 필요한 인자들의 오차를 정밀 실규모 실험을 통해 재산정하여 기존 ISO 748과 1088에서 제시한 인자별 오차의 적정성을 검증하고자 하였다. 이를 위해 흐름을 안정적으로 통제할 수 있는 건설기술연구원 안동 하천실험센터의 완경사수로(A2)에서 정상상태의 폭 7m, 수심 1m, 유속 약 1m/s의 흐름을 유지한 후, 유속 측정 정확도가 우수한 micro-ADV를 활용하여 공간적으로 매우 정밀하게 유속을 측정하고, 수심은 Total Station을 기반으로 흐름 발생 전에 정밀 측정하였다. 오차 분석 결과, ISO 규정에서 제시한 오차와 본 실험의 결과로 도출된 인자들의 오차는 상당한 차이를 보였다. 따라서, 본 연구 결과로 도출된 유속-면적법의 인자 별 오차는 실험이 수행된 소하천 규모의 하천에서 도섭법으로 산정된 유량의 불확도를 평가할 경우에 활용될 것으로 기대된다.

• Journal of the Korea Computer Graphics Society
• /
• v.26 no.5
• /
• pp.1-13
• /
• 2020

In this paper, we propose a new method to stable simulation the directional ice shape by coupling of freezing solver and viscous water flow. The proposed ice modeling framework considers viscous fluid flow in the direction of ice growth, which is important in freezing simulation. The water simulation solution uses the method of applying a new viscous technique to the IISPH(Implicit incompressible SPH) simulation, and the ice direction and the glaze effect use the proposed anisotropic freezing solution. The condition in which water particles change state to ice particles is calculated as a function of humidity and new energy with water flow. Humidity approximates a virtual water film on the surface of the object, and fluid flow is incorporated into our anisotropic freezing solution to guide the growth direction of ice. As a result, the results of the glaze and directional freezing simulations are shown stably according to the flow direction of viscous water.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.6
• /
• pp.1303-1310
• /
• 2021

We propose an edge-preserving transmission estimation by comparing the patch-based dark channel and the pixel-based dark channel near the edge, in order to improve the quality of outdoor images deteriorated by conditions such as fog and smog. Moreover, we propose a refinement that applies the Guided Image Filtering (GIF), a kind of edge-preserving smoothing filtering methods, to edges using Laplacian operation for natural restoration of image objects and backgrounds, so that we can dehaze a single image and improve the visibility effectively. Experimental results carried out on various outdoor hazy images that show the proposed method has less computational complexity than the conventional methods, while reducing distortion such as halo effect, and showing excellent dehazing performance. In It can be confirmed that the proposed method can be applied to various fields including devices requiring real-time performance.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.6
• /
• pp.401-412
• /
• 2022

In this study, we investigated the design methods of satellite constellations to conduct near-real-time surveillance reconnaissance of the Korean Peninsula. Also, we designed satellite constellations utilizing the Walker-Delta method and repeat-ground-track method, and taking into account the target area and the feasible number of satellites. The constrains of the Electro-Optical and Synthetic Aperture Radar equipment were also considered in performance analysis. As a result, the designed constellation has mean revisit time of less than 30 min which enables near-real-time surveillance reconnaissance of the Korean Peninsula. This research provides the strategy to design the satellite constellation for reconnaissance. Furthermore, it contributes to suggesting an operating strategy for micro-satellites constellation and guidelines for establishing space force.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.2
• /
• pp.114-125
• /
• 1993

In the present study the newly developed CAD/CAM system is applied to the process of the molding design, machining for mini-sized and precise processive die, and the production of press-stamped parts. When the design of a die was completed by means of CAD, wire cut NC data were generated with the aid of a design drawing in the CAD system and then inputed into the wire cut machine, and with the aid of a hole chart which had been made for this purpose, all the data were classified into the categories of CNC milling, jig boring, jig grinding, and machine center, and then developing a program of generating NC data, errors in process were reduced and programming time was shortened. The program was developed by using Autolisp language which was built-in the CAD, and realizing the intergation of designing a die, generating and processing NC data directly by a designer, designing time and machinery processing time were shorted. And the traditionally required working time for design. NC program required 6 days of work becomes 4 days of work by using the developed CAD/CAM system so that the efficiency shows 150% of the reduction working time. The prpgram of the design of the automation a progressive die mold was developed in the PC-Class Autocad system, therefore development expense could be reduced, and the integration of the CAD/CAM of the progressive die mold with the standard DB being built could be realized.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.1
• /
• pp.735-745
• /
• 2023

The purpose of this study is to examine how the control of an agent according to a driver's social status affects user experience factors in a multi-user environment of self-driving vehicles. We conducted a user study where participants viewed four scenarios (route changing/parking x accepting/declining a fellow passenger's command) and answered a survey, followed by a post-hoc interview. Results showed that either the routing scenario or accepting a passenger's command scenario had higher usefulness (convenience, effectiveness, efficiency) than their counterparts. Regardless of the car owner's social status, participants rated AI agents more positively when they met their goals effectively. They also stressed that vehicle owners should always be in control of their agents. This study can provide guidelines for designing future autonomous driving scenarios where an agent interacts with a driver, and passengers.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.272-272
• /
• 2020

급격한 도시화와 기후변화로 인해 기존 물순환 체계가 왜곡됨에 따라 저영향개발(Low Impact Development) 기법의 필요성이 증가하고 있는 추세이다. LID 요소 중 하나인 옥상녹화는 국내에 도입이 많이 되었고 적정 설계인자를 설정하기 위해 지속적으로 연구를 수행하고 있다. 따라서 본 연구에서는 옥상녹화 설계인자의 설정과 수문·식생·토양을 고려한 시나리오 구축을 통해 국내 물순환 모형인 K-LIDM을 이용하여 옥상녹화의 정량적 물순환 효율성 분석을 수행하였다. 대상유역은 한국 그린인프라 저영향개발센터 내 옥상녹화 실험장으로 옥상녹화에서 계측하고 있는 측정값을 기반으로 K-LIDM 모형 검보정을 수행하고 옥상녹화의 설계인자에 따른 시나리오를 통해 수문학적 성능평가를 수행하였다. 단기강우 시나리오를 적용하였을 때 옥상녹화는 일반콘트리트 옥상에 비해 5.25 ~ 36.48%의 유출저감률이 산정되었으며, 유출저감 한계효율은 지속시간 60분, 120분, 180분 일 때 각각 8.93%, 6.17%, 5.25%로 산정되었다. 장기강우 시나리오를 적용하였을 때는 연평균 53.54%의 유출저감률이 산정되었다. 또한 토심의 증가에 따른 유출량 감소는 관목>교목>지피 식물 순으로 나타났으며, 토심이 1cm 증가할 때의 저감유출랴은 지피 식물의 경우 0.0002㎥/s, 교목의 경우 0.0005㎥/s, 관목의 경우 0.0008㎥/s로 나타났다. 옥상녹화는 건물 설계에 따른 적재하중과 환경조건, 식물선정, 생육에 많은 영향을 받는 기술요소이므로 다양한 시나리오를 통한 수문학적 성능평가가 필요시 된다. 본 연구결과는 정량적 옥상녹화시스템 효율성 검증을 실시하기 위한 옥상녹화 설계가이드라인에서 고려사항을 제시할 수 있는 기준이 될 것이라고 기대된다.