• Journal of the Korean Society for Railway
• /
• v.10 no.2
• /
• pp.9-15
• /
• 2007

• 전기산업
• /
• v.13 no.1
• /
• pp.26-46
• /
• 2002

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.3
• /
• pp.329-335
• /
• 2014

A maglev vehicle of middle-low speed subjected to both a lift force and a guidance force by a U-shaped single electromagnet is operated over a curved guideway without a guidance controller. Therefore, it is required to carefully decide the curve shape for preventing contact between the vehicle and the guiderail for the case that a Maglev vehicle is operated over a curved guideway with a small radius. Specifically, the shape of the transition curve is very important from the stability viewpoint. This study analyzes the influence of curve shape on maglev stability through parametric composition of the transition curve during vehicle guidance. To this end, a multibody dynamics-based threedimensional Maglev vehicle model was developed. The model was integrated with the vehicle, curved guideway, electromagnets, and their controllers. Using this model, a realistic parametric study including the curved guideway was carried out. The results of research should be considered usefully in the design of bogies and the curve shape.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.985-988
• /
• 2008

Maglev is a system that a train runs levitated above a rail. Therefore it is very important to maintain a constant levitation gap for achieving serviceability and ride comfort. This study is a cooperation research subject of the 3-1 subject, performance improvement of maglev track structures, of the Center for Urban Maglev Program in Korea, started in 2006. The aim of this study is development of rapid constructions of bridge superstructure for maglev. At present, precast deck is widely used because of its superiority to cast-in-place concrete on quality and the term of works. The research group suggested basic systems of maglev guideway with PSC-U type and trapezoidal open steel box type girder, and precast deck, cooperating with Korea Railroad Research Institute, the managing institute of the 3-1 subject. In this study, full-scale structure was fabricated for structural safety evaluation of precast decks and rail, and a static performance test of those structures was performed.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.15 no.3
• /
• pp.1-9
• /
• 2011

The purpose of this study is to examine the dynamic characteristics of low, medium and high speed Maglev trains and guideways through dynamic interaction analysis. The coupled dynamic equations of motion for a vehicle of 10-dof and the associated guideway girders are developed by superposing vibration modes of the girder itself. The controller used in the UTM-01 Maglev vehicle is adopted to control the air gap between the bogie and guideway in this study. The effect of roughness, the guideway deflection-ratio and vehicle speed on the dynamic response of the maglev vehicle and guideway are then investigated using the 4th Runge-Kutta method. From the numerical simulation, it is found that the air gap increases with an increase of vehicle speed and the roughness condition. In particular, the dynamic magnification factor of the guideway girder is small at low and medium speeds, but the factor is noticeable at super-high speeds.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.4D
• /
• pp.523-533
• /
• 2009

The purpose of the present study is to examine the dynamic interaction characteristics between moving maglev vehicle and guideway bridge system. For this purpose, the dynamic governing equation of 2-dof maglev vehicle using optimal feedback control scheme of LQG was derived with or without consideration of the dynamic interaction between vehicle and guideway bridge system. From the parametric study, it was found that the dynamic interaction effect between bridge and vehicle was large in case of neglecting the railway roughness effect. But if the railway roughness effect was considered, it was observed two analysis results with or without consideration of the dynamic interaction did not show big difference. As a conclusion, it is required to take into account the dynamic interaction effect of bridge and maglev vehicle and the railway roughness for precise evaluation of runnability of maglev vehicle and impact factor of guideway.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.544-547
• /
• 2009

본 연구는 자기부상력의 선형 및 비선형효과가 이동중인 자기부상열차의 부상공극에 미치는 영향을 파악하는데 목적이 있다. 이를 위하여 자기공극의 피드백을 포함한 1자유도 차량에 대한 운동방정식을 구성하고, 최적능동제어기법을 적용하여 수치해석을 수행하였다. 해석결과 차량의 속도가 증가함에 따라 자기부상력의 선형 및 비선형효과가 자기부상차량의 부상공극에 미치는 영향에 뚜렷한 차이가 발생함을 알 수 있다. 결국 자기부상열차의 정확한 해석을 위해서는 자기부상력의 비선형효과를 고려한 해석이 필요할 것으로 판단된다.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1036-1037
• /
• 2015

지상1차 선형동기전동기는 속도와 위치센서가 회전축에 설 부착되어져 있는 회전형 동기전동기와 달리 가이드웨이를 따라 위치센서 관련부품이 설치되어져 있다. 차상 자기부상열차로부터 전송되는 위치신호는 지상 추진인버터의 실시간 추진제어에 필요한 정보에 미흡하다. 본 논문에서는 지상1차 선형동기전동기를 구동하는 추진인버터에 대한 위치신호 추정기에 대하여 제시하였다. 지상 추진인버터가 요구하는 수준의 높은 분해능의 위치신호를 얻기위하여 직류모터 모델의 블록선도로부터 폐루프 위치관측기를 설계하고 시뮬레이션 및 실험을 통해 가용 성능 확인하였다.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.846-853
• /
• 2008

Maglev System is expected to be a new public transportation for future because of its special characteristics. Sleepers of railway role on transferring the lateral load to guideway for Maglev and controlling the distance between rails. Variation of distance of sleepers can affect dynamic responses for maglev guideway. In this paper, Daejon maglev guideway is analyzed to find proper tie spacing of a maglev system. The analysis included using a maglev trainload and also the dead load as the primary forces on bridges. Not only the dynamic behavior of bridges is investigated under sleeper conditions, but also impact factor about vertical displacement on the guideway is produced. This guideway is analyzed in four cases followed by changing spacing of sleeper and then obtained dynamic characteristics such as displacements, acceleration and impact factor by Finite Element Analysis.

• Journal of Korea Spatial Information System Society
• /
• v.10 no.3
• /
• pp.45-54
• /
• 2008

This paper designs and Implements a connectivity analyzer for the hybrid vehicular network based on the real-life movement history data achieved from the Taxi telematics system currently in operation, aiming at providing a useful guideline and information to build a telematics network. The simulator traces the location of each vehicle, sets the vehicle type, either gateway or normal, decides whether it can be connected to a mobile gateway, keeps track of status of the vehicle, and calculates the duration of disconnected state. With this analysis considering the transmission range and gateway ratio, we can decide the cost-effective number of mobile gateways having both cellular and ad-hoc network interfaces, and buffer space requirement based on the measured disconnection time and message generation ratio.