• Journal of Energy Engineering
• /
• v.23 no.1
• /
• pp.33-39
• /
• 2014

This study was performed with electrolysis treatment method for improving anaerobic digestion gas production efficiency in a sewage sludge, thereby confirmed in anaerobic digestion production and denitrification effect. As a result, solubilization was increased by increasing treatment time of electrolysis and current density, also showed to be 9.02% with 10 mA/cm2 of current density in 4 mm electrode distance. Based on the results of BMP test used the above experiment, methane production was 0.49 L CH4/g VS, and increased by 88.4% compared with control groups. As for the results of denitrification using the sewage sludge treated with the same conditions, denitrification rate appeared $19.2mg\;NO_3{^{-}}N/g\;MLVSS{\cdot}hr$, and through the sewage sludge treated with electrolysis, it can be applied to anaerobic digestion and denitrification process by increasing biodegradation.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.30 no.4
• /
• pp.5-13
• /
• 2022

The current environmental problem is that environmental pollution is accelerating due to the generation of large amounts of waste and indiscriminate consumption of energy. Fossil fuels, a representative energy production fuel, are burned in the process of producing energy, generating a large amount of greenhouse gases and eventually causing climate change. In addition, the amount of waste generated worldwide is continuously increasing, and environmental pollution is occurring in the process of waste treatment. One of the methods for simultaneously solving these problems is the energy recovery from and reduction of organic wastes. Sewage sludge generated in sewage treatment plants has been treated in various ways since ocean disposal was completely prohibited, but the amount generated has been continuously increasing. Since the sewage sludge contains a large amount of organic materials, it is desirable to recover energy from the sewage sludge and reduce the final discharged waste through anaerobic digestion. However, most of the excess sludge is a mass of microorganisms used in sewage treatment, and in order for the excess sludge to be anaerobically digested, the cell walls of the microorganisms must be destroyed first, but it takes a lot of time to destroy the cell walls, so high rates of biogas production and waste reduction cannot be achieved only by anaerobic digestion. Therefore, the pre-treatment process of solubilizing excess sludge is required, and the thermal solubilization process is verified to be the most efficient among various solubilization methods, and high rates of biogas production and waste reduction can be achieved by anaerobic digestion after destroying cell walls the thermal solubilization process. In this study, when pretreating TS 10% thickened excess sludge through a thermal solubilization system, a study was conducted on solubilization characteristics according to retention time and operating temperature variables. The experimental variables for the retention time of the thermal solubilization system were 30 minutes, 60 minutes, 90 minutes, and 120 minutes, respectively, while the operating temperature was fixed at 160℃. The soulbilization rates calculated through TCOD and SCOD derived from the experimental results increased in the order of 12.11%, 20.52%, 28.62%, and 31.40%, respectively. And the variables according to operating temperature were 120℃, 140℃, 160℃, 180℃, and 200℃, respectively, while the operating retention time was fixed at 60 minutes. And the solubilization rates increased in the order of 7.14%, 14.52%, 20.52%, 40.72%, and 57.85%, respectively. In addition, TS, VS, T-N, T-P, NH₄⁺-N, and VFAs were analyzed to evaluate thermal solubilization characteristics of thickened excess sludge. As a result, in order to obtain 30% or more solubilization rate through thermal solubilization of TS 10% thickened excess sludge, 120 minutes of retention time is required when the operating temperature is fixed to 160℃, and 170℃ or more of operating temperature is needed when the operating time is fixed to 60 minutes.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.31 no.1
• /
• pp.27-34
• /
• 2023

In this study, spent mushroom substrate (SMS), which consits of lignocellulosic material, was pretreated by hydrothermal method; the changes of biodegradability and methane production yield of pretreated SMS were determined according to formation of lignocellulosic biomass degrading byproducts formation during thermal pretreatment. Based on the results, all hydrothermal pretreatment temperatures showed improved solubilization performance for biomass, and the optimum pretreatment effect was observed at an pretreatment temperature of 150℃ with the highest methane production yield. However, the induced formation of furan derivatives (i.e., 5-hydroxymethylfurfural and furfural) as byproducts during hydrolysis of hemicellulose and cellulose at severe condition lowered biodegradability and methane yield when the hydrothermal pretreatment temperature was higher than 180℃. Thus, this study revealed that hydrothermal pretreatment could promote anaerobic digestion efficiency of lignocellulosic biomass and is of great importance for preventing byproducts formation through pretreatment condition control.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2006.05a
• /
• pp.304-306
• /
• 2006

본 연구에서는 하수슬러지의 감량화 방안으로 초음파-알칼리 전처리를 통한 하수슬러지의 가용화 특성과 전처리된 하수슬러지의 비메탄활성도(SMA) 실험을 통한 메탄가스 발생 특성을 살펴본 결과 다음과 같은 결론을 얻을 수 있었다. 하수슬러지의 전처리에서 초음파와 알칼리의 단독 전처리보다는 초음파-알칼리 전처리의 경우, 또한 단일주파수 초음파보다는 이중주파수 초음파의 경우 SCOD 가용화율과 처리시간에 있어 더 효과적임을 알 수 있었다. 알칼리(40meq/L NaOH), 초음파(15, 20, 15+20kHz), 알칼리와 초음파 전처리시(15, 20, 15+20kHz with 40meq/L NaOH)시 반응시간 45분에서 하수슬러지의 세포파괴도가 가장 높게 나타난 것은 알칼리(40meq/L NaOH)와 이중주파수 초음파 15+20kHz 전처리로 조사되었으며, 이때 세포파괴도는 98.7%로 나타났다.

• Korean Chemical Engineering Research
• /
• v.48 no.1
• /
• pp.103-109
• /
• 2010

Anaerobic digestion has been widely used for the treatment of sludge, which is generated from the municipal and industrial wastewater treatment, for its volume reduction and methane production. Many researches on sludge pre-treatment have been carried out in order to enhance the performance of anaerobic digestion by increasing the hydrolysis of sludge which is the rate limiting step of anaerobic digestion. In this study, the effect of pre-treatment on sludge hydrolysis(solubilization), methane production and sludge reduction by anaerobic digestion after thermal, ultrasonic, and thermal-alkali sludge treatment were compared. Thermal-alkali treatment showed 67 and 70% solubilization with municipal and industrial wastewater sludge, respectively, while ultrasonic treatment and thermal treatment gave similar solubilization efficiency of 40% or more. Methane content of the anaerobic digestion gas reached 45~70% and pretreated sludge gave higher methane content than the control sludge. Methane production of thermal, ultrasonic, and thermal-alkali pre-treatment gave 2.6, 2.7, 3.5 times of municipal control sludge and 3.5, 4.1, 4.2 times of industrial control sludge, respectively. Sludge reduction of pre-treated sludge after anaerobic digestion gave 5~19% point higher than that of control sludge, and thermal-alkali treatment showed higher reduction efficiency than thermal and ultrasonic treatment. The results proved that pre-treatment contributed significantly not only for the methane production but also for the cost reduction of sludge treatment and disposal, and thermal-alkali treatment gave the best performance for the sludge treatment.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2006.05a
• /
• pp.363-369
• /
• 2006

본 연구의 목적은 하수슬러지로부터 외부탄소원을 회수하여 하수의 질소 및 인 처리를 위한 최적의 pH선정과 감마선 조사의 적용가능성을 조사하는 것이었다. 연구 결과, 외부탄소원의 회수 가능성을 평가할 수 있는 index인 SCOD의 값은 비조사된 하수슬러지에서는 pH13에서 SCOD 간이 6590mg/L이고, 가용화율 SCOD/TCOD값은 57.8%로 최대의 탄소원을 회수할 수 있음을 확인하였고, 동일 pH에서는 경우에는 조사선량이 증가할수록 SCOD/TCOD값이 증가하였다. 알칼리 가수분해가 산처리 보다는 슬러지 탄소원을 회수할 수 있는 더 적정한 처리방법이고, 알칼리의 전처리에 감마선 조사한 하수슬러지의 탄소원 회수율은 pH 13, 조사선량 20kGy에서 SCOB/TCOD 최대의 값인 59% 분석되었다.

• Journal of Wetlands Research
• /
• v.15 no.2
• /
• pp.165-170
• /
• 2013

Pilot scale study was carried out to produce Volatile Fatty Acids with primary sludge from municipal wastewater treatment plant. An acid fermenter was operated at pH 9, $35^{\circ}C$, SRT of 3.5-4.25d, using a final effluent as elutriating water(Mode-I) and pH 9, SRT 5d, temperature of $35^{\circ}C$(Mode-II), $55^{\circ}C$(Mode-III), using a primarily treated water as elutriating water. Although solubilization rate was enhanced with the increase of temperature, the VFAs production rate was decreased. The VS reduction was shown approximately 56%, and the sludge volume reduction was 93%. The optimal conditions for solubilization was obtained at pH 9, $35^{\circ}C$ and SRT of 5d.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.3
• /
• pp.214-222
• /
• 2012

Several acidogenesis batch tests, and BMP (Biochemical Methane Potential) with food waste leachate was tested at various organic loading rates (OLRs) on the mesophilic ($35^{\circ}C$) and thermophilic ($55^{\circ}C$) conditions. In acidogenesis batch test, VS removal efficiencies were 27.3% and 30.6% at $35^{\circ}C$ and $55^{\circ}C$, respectively. Removal efficiency of VS at $55^{\circ}C$ was higher than that at $35^{\circ}C$. With decrease in VS, SCOD increased as reaction time increased. Solubilization efficiency of VS were 27.4% and 33.4% at each reaction temperature within 4 days acid fermentation. Methane yield were 461 and 413 $mLCH_4/gVS$ at mesophilic and thermophilic BMP test, respectively. SCOD solubilizations in the themophilic acid fermenter showed 8~17% higher than those in the mesophilic fermenter. COD removal efficiency showed higher in the mesophilic acid fermenter at low organic loading rate. While at high organic loading rate, it was higher in the thermophilic acid fermenter. VS removal efficiency was higher at the mesophilic temperature, however, it decreased at OLR higher than 6 kg $COD/m^3{\cdot}day$. On the contrary, VS removal efficiency did not decrease but maintain at thermophilic temperature. The amount of methane gas generated from mesophilic methanogenesis digester was 12.6, 21.6, 27.4 L/day at OLR of 4, 5, 6 $COD/m^3{\cdot}day$, respectively. The amount of methane gas generated from themophilic methanogenesis digester was 14.3, 20.6, 25.2 L/day at each OLR, respectively, which is about 15~20 L/day lower than those generated at mesophilic digester.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.5
• /
• pp.483-487
• /
• 2001

As a part of basic investigation for utilizing of cuttle bone as a calcium source, we examined on the extraction methods (calcining at $800^{\circ}C$ for 2 hrs, autoclaving at $121^{\circ}C$ for 10 hrs and ultrasonic treatments at $60^{\circ}C$ for 10 hrs) as a pretreatment methods for preparation of calcium-based powder from cuttle bone, The color of calcined calcium-based powder from cuttle bone was white, while that treated by other methods was light yellow. The calcium content in calcined calcium-based powder was $70.5\%$, and revealed high about 2 times compared to those pretreated by other methods. And, calcium solubility in calcined calcium-based powder was improved 22 times compared to raw cuttle bone powder, Among calcining, autoclaving and ultrasonic treatments as a pretreaoent methods for preparation of calcium-based powder from cuttle bone, calcining treatment was superior to other methods on the aspect of color, calcium solubility and purity of calcium-based powder, Judging from X-ray diffraction pattern of calcined calcium-based powder, most of calcium was present as a form of calcium oxide, But, pH of calcined calcium-based powder revealed strong alkali of pH 12.9. This pH value might invoke health risk in using food resource. Therefore, for utilization effectively calcined calcium-based powder from cuttle bone, it requires a suitable treatment such as adjustment of pH to neutral condition.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.2
• /
• pp.158-163
• /
• 2000

As a part of investigation for utilizing of canned tuna processing by-products as a food resource, we examined the processing conditions and characteristics (extraction methods and ashing condition) of a calcium powder from skipjack tuna bone. Among ashing, autoclaving, and shaking methods for extraction of calcium powder from skipjack tuna bone, ashing method was superior to other methods on the aspect of fish odor, white index, and calcium recovery of calcium powder. Based on the results of white index and soluble calcium ratio, the optimal ashing temperature and time for preparation of a calcium powder from skipjack tuna bone was at $900{\circ}C for 15 min$. Cohesive ratio of calcium powder by shaking at pH 7.0 was increased up to 16 hrs, but after that almost unchanged. Cohesive ratio of calcium powder by shaking for 24 hrs was increased at neutral and alkaline conditions (pH 6-8 and pH 9-11), but almost unchanged at acidic conditions (pH 2-5). For the effective utilization of the calcium powder from skipjack tuna bone, a suitable treatment is needed for improvement of calcium solubility at neutral condition.