• Journal of the Korean GEO-environmental Society
• /
• v.15 no.1
• /
• pp.5-12
• /
• 2014

In this study, we developed the electric heating equipment and applied for soft ground improvement. The developed heat pipe is 4 m-length and consumes 1 kW/m, which is consisted of Ni-Cr wire. It was installed in 3.5~4.5 m below ground surface and heated for 96 hours (48 hours, 2 times). The temperature variation and vapor pressure caused by electric heating was measured by the thermometer and pressure gauge which were installed in the ground (5.0 m), and the tip resistances were measured by static electronic piezo-cone penetration test (CPT). As the results of experiments, 2-order polynomial curve was shown to adjust the variation of tip resistance and the temperature distribution with the horizontal distance from electric heater, whose R2 value is close to 1. In addition, in-situ pore-water pressure and water content was decreased.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.425-426
• /
• 2017

본 논문은 미래 녹색에너지원으로 주목받는 핵융합에너지 개발 장치인 한국형 초전도 핵융합 연구로(KSTAR : Korea Superconducting Tokamak Advanced Research)의 가열장치인 중성입자빔(NBI : Neutral Beam Injector) 장치를 소개하고, 2016년 KSTAR 실험에서 빔 에너지 90/70/80 keV, 빔 출력 3.81 MW, 70.6초의 최대 장 펄스와 빔 에너지 95/90/90 keV, 빔 출력 5.13 MW, 10.6 초로 입사 운전한 NBI 장치 실험 결과를 정리한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.4
• /
• pp.740-746
• /
• 2009

Two step serial load induction superheater has been proposed using resonance type induction heat method in this paper. Heat method is a type of flowing the electron induction and current to special alloy heater in body from external heat coil with non-contact method. Inverter was a full bridge serial load resonance type and inductor was used as load in LC resonance design to maximize the efficiency. The developed system is a new heat exchanging method combined with electromagnetic induction heater and fluid movement, ana very accurate to control of heating the gas, liquid and evaporated mass, so on without combustion process.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.3
• /
• pp.124-128
• /
• 1999

The object of the present study is to obtain a 20[kHz], 10[kW] rating, high efficiency induction heating system by high frequency serises-resonant inverter. Proposed is a topology that minimize a reactive power, by which direct iOIrt voltage is variable corresponding to the variation of the load, heated-object, and by which the switching of inverter is forced to follow a resonant frequency. And assured that the power foctor of the inverter in a induction heating system is proper about O.96 through the simulation and results.esults.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1702-1703
• /
• 2007

KSTAR(Korea Superconducting Tokamak Advanced Research)의 보조 가열장치 중에 하나인 중성입자 빔 가열장치의 열량을 실시간으로 측정할 수 있는 시스템을 개발하였다. 실시간으로 열량을 측정하기위해 중성입자 빔 발생장치의 말단에 위치한 열량계(Calorimeter)의 냉각수 입 출구 온도를 온도센서 중의 하나인 열전대를 이용하여 측정하고 이를 열량 측정을 위해 개발한 알고리듬을 이용하여 실시간으로 중성입자 빔의 열량으로 연산한다. 연산된 열량은 사용자 인터페이스 화면에 출력하여 매 실험마다 열량계에 입사된 열량을 실시간으로 확인이 가능하도록 하였다.

• Journal of Biosystems Engineering
• /
• v.22 no.1
• /
• pp.68-80
• /
• 1997

마이크로파는 전시중에 레이다로서 널리 이용되어 많은 활약을 하여 왔지만 전쟁이 끝남과 동시에 군용레이다의 수요가 격감하여 마이크로파 전문업체는 레이다를 대신하는 용도로서 가열에 이용하는 것을 고안했다. 1945년 미국의 전문업체에서 마이크로파 도파관의 개구부에 옥수수를 놓았더니 이것이 가열되어 부풀어 터지는 것이 관측되었고 계란의 가열을 시도하였으나 급격한 가열로 파열되어 기술자가 상처를 입은 사고가 발생하였다. 그래서 안전성과 효율향상을 목표로 개방된 공간이 아니라 밀폐된 용기중에 마이크로파를 도입하는 방식이 고안되었다. 이렇게 하여 마이크로파 오븐이 탄생하고 이윽고 그것이 발전하여 가정용의 전자렌지가 되고, 턴넬형의 공업용 가열장치가 되어 고무가류, 식품 등의 건조, 냉동육의 해동 등 널리 실용화되었던 것이다.(중략)

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.2
• /
• pp.185-189
• /
• 2016

Energy-saving heat depending on the country's rise in oil prices up to the product development is regarded as pending issues. Therefore, in recent years, been a continuing research studies developed for increasing the economic efficiency and reliability achieved in effectively using the side of the energy for heating using electrical to address these problems and, in particular made active the technology developed for high performance and renal material becoming. This paper is to study the development of highly efficient induction heating device according to the excellent heat transfer characteristics for energy transfer. Induction heating is used as the phenomenon of electromagnetic induction, such as heat transfer conduction or convection of the existing methods are no different. Medium heat without beating is absorbed directly into the water column switched rapidly, have features that heats evenly. In addition, high-frequency induction heating in a variety of frame designs. Heating element heats only when utilized properly, it is possible to heat the focus.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.4
• /
• pp.429-434
• /
• 2011

Bulk cargo loaded into ship can be damaged by various kinds reasons. This paper aims to analyze about cargo damage of coil carrier ship due to condensation. Condensation is the formation of liquid drops of water from water vapor. Condensation consists of small drops of water which form when warm water vapour or steam touches a cold surface such as a window. In general, condensation have occurred by temperature difference at large building and ship's tank. It is phenomenon that can occur often to oceangoing vessel moving temperature difference places in similar time. This paper proposes a new method using dehumidification device and fan heater to prevent bulk cargo damage of coil carrier ship from condensation.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.04a
• /
• pp.77-78
• /
• 2006

급속소결방법인 고주파유도가열 소결법과 펄스전류활성 소결법을 이용하여 습식 볼밀링으로 혼합한 WC-8wt.%Ni분말에 60MPa의 압력과 고주파유도가열장치의 경우 전체 용량 (15kw)의 90%에 해당하는 고주파출력을, 펄스전류활성 소결장치의 경우 2800A의 펄스전류를 가하여 치밀한 소결체를 2분이내의 짧은 시간에 제조하였다. WC 초기입자크기가 증가함에 따라 제조된 소결체의 입자크기와 평균자유행로는 증가하였다. 또한 WC 결정립 크기가 증가함에 따라 경도는 증가하였으며, 파괴인성은 감소함을 알 수 있었다. $0.5{\mu}m$의 분말을 60MPa의 압력하에서 고주파유도가열 소결법에 의해 얻어진 소결체의 파괴인성과 경도는 각각 $1813kg/mm^2$과 $8.9MPa{\cdot}m^{1/2}$ 이었고, 펄스전류활성 소결법에 의해 제조된 소결체의 경도와 파괴인성은 각각 $1839kg/mm^2$과 $8.5MPa{\cdot}m^{1/2}$ 이었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2006.02a
• /
• pp.237-237
• /
• 2006