• Title/Summary/Keyword: 가스액화연료

Search Result 139, Processing Time 0.021 seconds

Study of Cold Gas Propulsion System Utilizing Butane as Liquefied Propellant (부탄을 액화 연료로 사용한 냉가스 추진 시스템에 대한 연구)

  • Kang, Suk-Jin;Kwon, Ky-Beom;Cho, Dong-Hyun;Lee, Sang-Hyun
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.35 no.4
    • /
    • pp.323-328
    • /
    • 2007
  • A direct application of liquefied gas propellants to a typical small satellite cold gas propulsion system was analyzed. Performance of systems using liquefied gas propellant under consideration was compared to that of a nitrogen cold gas propulsion system. Liquefied gas propellant propulsion system's performance, required tank volume, and required propulsion system mass has been calculated at the same mass, volume, and total impulse condition of a typical nitrogen cold gas propulsion system. It was found that the liquefied gas propulsion system has advantages in performance, volume, and mass, compared to a typical nitrogen cold gas system, and can be directly applied to a cold gas propulsion system.

Estimation of explosion risk potential in fuel gas supply systems for LNG fuelled ships (액화 천연 가스 연료 선박의 연료 공급 장치 폭발 잠재 위험 분석)

  • Lee, Sangick
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.39 no.9
    • /
    • pp.918-922
    • /
    • 2015
  • As international environmental regulations for pollutant and greenhouse gas emissions discharged from ships are being reinforced, it is drawing attention to use LNG as ship fuel. This paper compares the explosion risk potential in the LNG fuel gas supply systems of two types used in marine LNG fuelled vessels. By selecting 8500 TEU class container ships as target, LNG storage tank was designed and pressure conditions were assumed for the use of each fuel supply type. The leak hole sizes were divided into three categories, and the leak frequencies for each category were estimated. The sizes of the representative leak holes and release rates were estimated. The release rate and the leak frequency showed an inverse relationship. The pump type fuel gas supply system showed high leak frequency, and the pressure type fuel gas supply system showed high release rate. Computational fluid dynamics simulation was applied to perform a comparative analysis of the explosion risk potential of each fuel supply system.

Performance Analysis of the Experimental Liquid Rocket Engine using Liquefied Natural Gas as a Fuel (액화천연가스를 연료로 하는 시험용 액체로켓엔진의 성능해석)

  • 한풍규;이성웅;김경호;윤영빈
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 2004.03a
    • /
    • pp.198-204
    • /
    • 2004
  • Using liquefied natural gas as a fuel, water, natural gas and liquefied natural gas-cooled firing tests were conducted. With the viewpoint of characteristic velocity, and specific impulse, the effect of OF mixture ratio and fuel inlet temperature into a combustion chamber were analyzed. OF mixture ratio and fuel inlet temperature into a combustion chamber have great influence on the performance. Characteristic velocity and theoretical specific impulse attain the maximum value at 0.72~0.75 and 0.75 of OF mixture ratio, respectively. Engine performance has a tendency to increase, proportional to fuel inlet temperature into a combustion chamber affected by the regenerative cooling.

  • PDF

Evaluation on the Characteristics of Liquefied Natural Gas as a Fuel of Liquid Rocket Engine (액체로켓엔진 연료로서 액화천연가스 특성 평가)

  • Han, Poong-Gyoo;NamKoung, Hyuck-Joon;Kim, Kyoung-Ho
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.32 no.3
    • /
    • pp.66-73
    • /
    • 2004
  • As a rocket propellent of hydrocarbon fuels, the characteristics of liquefied natural gas was evaluated with the viewpoint of the constituents and content, the cooling performance as a coolant, and characteristic velocity and specific impulse as parameters of the engine performance. Content of methane was a principal factor to determine the characteristics as a rocket propellant and more than 90% of it was needed as a fuel and coolant in the regenerative cooled liquid rocket engine. Some constituents of the liquefied natural gas can be frozen by the pre-cooling of the pipe lines, therefore they can be a factor disturbing the normal working of engine. In case the content of methane is around 90% in the liquefied natural gas, a normalized stoichiometric O/F mixture ratio of 0.75 is suggested for a nominal operation condition to get the maximum specific impulse and characteristic velocity.

Status and Plans on Low Emission Coal Energy (무공해 석탄에너지 현황 및 계획)

  • Jung, Heon
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 2009.06a
    • /
    • pp.856-856
    • /
    • 2009
  • 석유 및 천연가스를 대체하는 자원으로 석탄이 유망하다고 전망하고 있다. 미국에서는 6대 파괴력이 있는 기술로 청정석탄기술이 선정되었고, 한국에서도 15대 그린에너지 중 하나인 청정연료에 석탄전환기술이 포함되어 전략로드맵이 작성되고 있다. 국내에서 추진되고 있는 석탄기술은 석탄가스화를 기반으로 하고 있다. 석탄가스화는 고체연료인 석탄을 $1000^{\circ}C$ 이상의 고온에서 산소와 반응시켜 일산화탄소와 수소가 주성분인 합성가스로 전환하는 기술이다. 석탄을 가스화하면 석탄에 포함된 불순물을 쉽고 완벽하게 제거할 수 있으며 특히 CO2 제거를 값싸게 할 수 있어 청정화가 가능하다. 최근 고유가를 겪으면서 열량이 높은 고급탄의 확보가 어려워지면서 가격이 낮고 수급이 용이한 저급탄을 활용하는 기술의 수요가 발생되어 국내에서 기업을 중심으로 저급탄을 고효율로 가스화하는 기술 개발이 시도되고 있다. 정제된 석탄가스는 성분을 조절하여 촉매에 의해 메탄으로 전환시킬 수 있고, 이렇게 제조된 가스를 합성천연가스(SNG)라 한다. 값싼 저급탄을 사용하면 SNG를 천연가스보다 저렴하게 생산할 수 있다. 국내 기업이 SNG 제조 실증시설을 도입하고, 동시에 핵심기술인 SNG 합성반응공정을 개발하는 사업을 추진하고 있다. 석탄가스를 촉매반응에 의해 디젤 및 �F싸로 전환하는 석탄간접액화기술은 현재 남아공 Sasol사에서 상업적으로 운전되고 있는 기술이나 국내로의 기술이전이 거의 불가능하다. 철을 기반으로 하는 고유 촉매와 scale-up이 가능한 반응기가 핵심인 기술로 국내에서 세미-파일럿급 액화공정 기술개발이 진행중이다. 전세계적으로 석탄액화공장의 수요가 현재의 15만배럴/일에서 2030년 240만배럴/일로 증가한다고 예측된다. 따라서 200조원 이상의 플랜트 시장이 기대되며 국산 가스화, SNG 및 액화기술로 상당부분의 시장을 장악하고자 한다.

  • PDF

Overall Study for the Imports Storage and Usage of the Liquefied Petroleum Gas (L.N.G) (No.2 the form of the encerprise of the L.N.G. project) (액화천연가스의 수입저장이용에 관한 종합적 조사연구 (그의 2 액화천연가스의 기업형태))

  • 나윤호
    • Journal of the Korean Professional Engineers Association
    • /
    • v.12 no.3
    • /
    • pp.12-17
    • /
    • 1979
  • The form of the Enterprise of the L.N.G project Consists of such three enterprises that the Construction and operation of the liquefcation plant of the Natural gas, and L.N.G. tankers Operating enterprise and the receiving and storaging plant of the L. L.N.G., above mentined three enterprises Concerned with capital and technique mutually, and so it arises such results that the foundmental requirements of the fuel the long-term and safty-price suply of the L.N.G. are met.

  • PDF

도시가스 및 액화석유가스의 부취제 관리개선에 관한 연구

  • 김남규;목연수;최재욱
    • Proceedings of the Korean Institute of Industrial Safety Conference
    • /
    • 1998.11a
    • /
    • pp.289-292
    • /
    • 1998
  • 도시가스의 냄새는 오래전부터 가스의 누출사고를 미연에 방지하는 가장 간단한 경고수단으로 중요한 역할을 다하여 왔다. 과거 도시가스는 석탄가스가 주류였으며, 제조가스 자체는 그다지 취기를 가지지 않았다. 도시가스 원료로 납사, LPG, LNG 등을 사용함으로서 제조가스 자체에 취기가 희박하였고, 연료가스 및 도시가스의 부취가 안전에 대한 운용, 관리에 미흡한 점이 많았다. (중략)

  • PDF

A Study on Safety Assessment for Low-flashpoint and Eco-friendly Fueled Ship (친환경연료 선박의 가스누출 피해저감을 위한 연구)

  • Ryu Bo Rim;Duong Phan Anh;Kang Ho Keun
    • Journal of Navigation and Port Research
    • /
    • v.47 no.1
    • /
    • pp.25-36
    • /
    • 2023
  • To limit greenhouse gas emissions from ships, numerous environmental regulations and standards have been taken into effect. As a result, alternative fuels such as liquefied natural gas (LNG), liquefied petroleum gas (LPG), ammonia, and biofuels have been applied to ships. Most of these alternative fuels are low flashpoint fuels in the form of liquefied gas. Their use is predicted to continue to increase. Thus, management regulations for using low flash point fuel as a ship fuel are required. However, they are currently insufficient. In the case of LNG, ISO standards have been prepared in relation to bunkering. The Society for Gas as a Marine Fuel (SGMF), a non-governmental organization (NGO), has also prepared and published a guideline on LNG bunkering. The classification society also requires safety management areas to be designated according to bunkering methods and procedures for safe bunkering. Therefore, it is necessary to establish a procedure for setting a safety management area according to the type of fuel, environmental conditions, and leakage scenarios and verify it with a numerical method. In this study, as a feasibility study for establishing these procedures, application status and standards of the industry were reviewed. Classification guidelines and existing preceding studies were analyzed and investigated. Based on results of this study, a procedure for establishing a safety management area for bunkering in domestic ports of Korea can be prepared.