• Journal of Wetlands Research
• /
• v.25 no.4
• /
• pp.291-296
• /
• 2023

DIWS system was employed to treat hydrochloric acid gas from cold rolling mill process of iron and steel industry. Chlorine gas generated from the acid regeneration system was combined with hydrogen gas and hydrogen chloride gas was increased to 50%. After the injection of Na₂S₂O₃ to remove chlorine gas, the removal of hydrogen chloride was stably kept 87.5~88.8%, where the inflow was 13.1~13.4ppm and the outflow was 1.5~1.7ppm. DIWS system can be recommended for the real iron and steel plant because it was stably maintained not only the air emission standards but also the reduction of chemical usage.

• Resources Recycling
• /
• v.12 no.2
• /
• pp.36-44
• /
• 2003

The present work relates to the recovery of dissolved Mo from spent mandrel dissolving acid solution by injecting ammonia gas. In order to optimize the process parameters for high yield and high purity of recovered Mo products, a bench scale and a pilot scale experiments were carried out. As a result, more than 99.5% of Mo in spent acid was recovered in the form of ammonium molybdate(4MoO$_3$.$2NH_3$.$H_2$O). The purity of Mo products recovered was higher than 99.5%. In addition, the mother liquor, residual solution after precipitation and filtration of ammonium molybdate solid particles, could be utilized as fertilizers.

• Journal of the Korean Institute of Gas
• /
• v.19 no.6
• /
• pp.105-109
• /
• 2015

In this paper is proposed for the oil return device developed to perform efficient emergency operation in the event the sea oil spill. Oil recovery apparatus for spilled oil on marine aims to quickly purged with high recovery. Oil recovery apparatus can prevent secondary pollution which may occur in the purification method using the adhesion agent and chemicals. Also it has excellent properties oil recovery. Adopted by the vapor explosion-proof mechanism to remove the risks that may occur during oil recovery operations.

• Journal of the Korean Institute of Gas
• /
• v.17 no.5
• /
• pp.75-80
• /
• 2013

In this study, the effect of phosphorus flame retardants on the flame retardancy of the rigid polyurethane foam(PUF) was studied. Tetramethylene bis(orthophos-phorylurea)[TBPU] and Tris(2-chloroethyl) phosphate[TCEP], Tris(2-chloropropyl)phosphate [TCPP], Triethyl phosphate[TEP] were used as flame retardant. It was found that TBPU added PUF exhibits low mean heat release rate(HRR), peak HRR, effective heat of combusion(EHC), mass loss rate (MLR), CO yield and $CO_2$ compared other flame retardants.

• Journal of the Korean Institute of Gas
• /
• v.23 no.6
• /
• pp.61-66
• /
• 2019

Unlike NG supplied through pipes, LPG is mainly used for independent storage of cylinders or small storage tanks. As LPG is widely used in islands and underdeveloped areas, accidents due to neglect of safety management are high. Houses and businesses that have LPG accidents are likely to be damaged due to relatively high population density. Therefore, the necessity of strengthening the safety management of LPG is constantly raised. Accordingly, in 1996, Korea Gas Safety Corporation conducted an LPG leak test. In this study, based on the 96-year experiment, the gas leakage measurement of LPG vessels was conducted by adding several conditions such as outside temperature and pipe condition. Through this, the trend of leakage for various scenarios of LPG leakage was examined. In the case of a gas leak, when the article which may affect the pressure such as a regulator is not connected, the leakage amount is greatly changed by the outside air temperature, and when the regulator is fastened, the influence of the outlet pressure is large. It is expected that the experiment can be used as basic data for determining gas accidents and leakages that may occur later.

• Journal of Animal Science and Technology
• /
• v.45 no.4
• /
• pp.551-558
• /
• 2003

This study was conducted to investigate the effect of dietary wormwood powder (Artemisia montana Pampan; WP) supplementation on growing performance and fecal noxious gas emission in weanling pigs. One hundred and twelve pigs were alloted into four treatments and offered for 4 weeks one of the diets supplemented with 0% (control), 0.5% (0.5), 1.0% (1.0) and 2.0% (2.0) WP. Each treatments has four replicate with 7 pigs per replicate. ADG, ADFI and F/G were improved by 1.0 and 2.0 WP supplementation during 0d${\sim}$14d feeding. Feed intake of 1.0 WP diet was higher (P<0.05) than any other diet during 15d${\sim}$28d feeding. But there were no differences among the other treatments in the weight gain and feed conversion. During the whole feeding period, daily weight gain and feed intake of pigs fed 1.0 and 2.0 treatments were higher than those of pigs fed control and 0.5 diet. DM digestibility was significantly (P<0.05) higher in weanling pigs fed 0.5, 1.0 and 2.0 WP than that of the control. The protein digestibility was significantly improved in 1.0 WP treatment and the phosphorus digestibility was improved in 2.0 WP treatment. Excretion of nitrogen and phosphorus was significantly (P<0.05) decreased by 2.0 treatment than control. Emission of fecal ammonia after 48 hours storage in vinyl bag dramatically decreased by all the treatments except control. However, there was no statistical difference in fecal hydrogen sulfide emission among treatments. In conclusion, this study suggested that the dietary 1.0${\sim}$2.0 supplementation of WP can improve productivity of pigs decrease fecal $NH_3$ and $H_2S$ gas emission.

• Korean Journal of Environmental Agriculture
• /
• v.29 no.2
• /
• pp.197-205
• /
• 2010

This study was conducted to investigate the optimum conditions for efficient methane production through anaerobic digestion of pig waste slurry. The examined parameters were organic matter content of the pig slurry, the ratio of seed sludge to pig slurry, and stirring intensity of the digestion reactor. The effects of types of slurry produced from different purpose-based pigs fed with different feeds were also tested. The methane concentration in the produced biogas was 45% when the ratio of seed sludge to pig slurry was 50% and total solid (TS) concentration was 1%, and it increased in proportional to TS concentration increases from 3 to 7%. At 3 and 5% of TS concentration, increasing mixing velocity from 80 to 160 rpm resulted in higher biogas production amount. However, mixing amount of seed sludge did not cause any significant effect on biogas production. Overall, the most efficient biogas production was achieved at 3-5% TS concentration in combination with 50% seed sludge inoculation and mixing velocity at 120 rpm. Among pig slurry types, gestating sow waste slurry showed the highest biogas production probably due to higher the degradation rate than other types of pig waste slurry being affected by the feeds components.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.218.1-218.1
• /
• 2010

천연가스를 대체하며 21세기 신 에너지원으로 기대되고 있는 메탄 하이드레이트가 주목을 받게된 것은 1930년대 시베리아의 화학 플랜트에서 고압의 천연가스 수송용 파이프라인이 막히는 사고가 빈번하게 발생하여 그 원인을 조사한 결과, 파이프 내에서 가스와 물이 결합하여 하이드레이트를 형성하고, 그것이 파이프의 내벽에 부착되어 파이프를 막고 있다는 것으로 밝혀지면서 천연가스 하이드레이트가 주목을 받게 되었다. 또한 메탄 하이드레이트의 경우 46개의 물분자에 8개의 메탄가스 분자가 포획된 구조로, 그 분자식은 $CH_4{\cdot}5.75H_2O$이다. 따라서 메탄가스와 물의 이론적 용량비가 216:1로써, 표준상태에서 $1m^3$의 메탄 하이드레이트는 $172m^3$의 메탄가스와 $0.8m^3$의 물로 분해된다. 만약 이와 같은 특징을 역으로 이용할 경우 메탄을 주성분으로 하는 천연가스를 물에 포집시켜 인공적으로 하이드레이트를 제조할 수 있기 때문에 천연가스 수송 및 저장의 수단으로써 그 중요성이 커지고 있으며, 액화수송보다 18-24%의 비용절감이 이루어진다고 보고하였다. 그러나 인공적으로 메탄 하이드레이트를 제조할 경우 가스 포집율의 예측이 매우 어려운 것으로 알려져 있다. 따라서 본 연구에서는 동일한 조건에서 메탄 하이드레이트 형성의 반복성 실험을 10회 수행한 결과 과냉도가 클수록 최대최소차이가 줄었고 또한 교반을 시킬 경우도 최대최소차이가 줄어 들었다.

• Clean Technology
• /
• v.12 no.3
• /
• pp.138-144
• /
• 2006

Conversion of methane to synthesis gas in a capacitive rf plasma at low pressure was experimentally studied. In this plasma, electrons which had sufficient energy-level collided with the molecules of methane or oxygen-containing gas, which were than activated and converted to synthesis gas. The effect of input power, various oxygen-containing gas and composition of the gas mixture were investigated. The conversion of methane reached up to 100%. In all cases, hydrogen and carbon oxide were produced as primary products, and other compounds was generated. The conversion of methane and the yield of hydrogen and carbon oxides were increased with increasing the input power. Depending on the oxygen-containing gases, the composition of synthesis gas was varied.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.153.2-153.2
• /
• 2010

화력발전 분야에서 $CO_2$ 분리는 크게 연소전 탈탄소화(pre-combustion capture)와 연소후 포획(post-combustion capture)으로 나누어진다, 연소후 포획은 연료를 연소한 후 발생하는 $CO_2$와 $N_2$가스에서 $CO_2$를 분리하는 기술로 흡수나, 흡착, 막분리 등을 주로 이용한다, 연소전 탈탄소화는 연소 전에 $CO_2$가 발생되지 않도록 하는 기술로써, 부분 산화나 개질 및 수성가스 변위반응 등이 포함되며 생성된 $H_2$와 $CO_2$를 분리하여 수소를 생산하는 기술($CO_2/H_2$분리가 핵심)이다. 우리나라는 대부분 연소후 포획 위주로 많은 연구가 진행되어 왔다, 하지만 최근 고유가 시장이 형성되면서 석탄화력 발전 및 복합가스발전(IGCC)에 필요한 연소전 탈탄소화($H_2/CO_2$ 가스로부터 $CO_2$ 회수) 연구에 산업적 관심이 급상승되고 있다. 특히, 연소전 탈탄소화 과정에서는 높은 자체압력(약 2.5 - 5.0MPa)과 비교적 높은 농도의 $CO_2$(약 40%의)가 발생되기 때문에, 연소전 탈탄소화는 가스하이드레이트 형성/분해 원리가 가장 잘 적용될 수 있는 기술이라 할 수 있다. 본 연구에서는 가스 하이드레이트 형성원리를 이용하여 정온 정압 조건에서 $CO_2/H_2$ 하이드레이트를 제조하였으며 특히, 하이드레이트 형성 촉진제인 THF(Tetrahydrofuran)와 TBAB(Tetra-n-butyl ammonium bromide)를 첨가하여 각각 0.5, 1, 3mol% 농도에 따른 상평형 및 속도론 실험을 수행 하였다. 또한 라만 분석을 통하여 $CO_2$ 회수 분리에 대한 연구도 병행하였다. 이러한 연구는 연소전 탈탄소화 기술에서의 $CO_2$ 회수 분리에 대한 핵심 연구임과 동시에 탄소배출권 규제에 실질적인 기여를 할 수 있을 것으로 사료된다.