• Human Ecology Research
• /
• v.54 no.3
• /
• pp.279-292
• /
• 2016

This research predicted the fit of the basic bodice patterns worn on adolescent girls' 3-dimensional scanned bodies. Six 3-dimensional scanned bodies were selected from the sixth Size Korea data. Each of them had good body posture and represented one of the three garment sizes: 79-160, 82-160, and 85-160. Experimental basic bodice patterns were drafted by three basic bodice pattern making methods. The fit of the basic bodice pattern was analyzed by the CLO 3D virtual clothing system. The results showed that the experimental basic bodice patterns did not fit well at the neck, shoulder, and back for adolescent girls. The fit of the basic bodice patterns varied by pattern making method or size. The basic bodice pattern A with the waist darts ending above the breast line showed the best fit among the three different types of experimental pattern. Among the three sizes 79-160, 82-160, and 85-120, size 79-160 basic bodice pattern showed the worst fit for adolescent girls. The results show that the placement and size of the bodice darts affect the basic bodice pattern fit. The basic bodice pattern making method of size 79-160 for adolescent girls should be studied in a future study.

• Journal of the Korean Chemical Society
• /
• v.31 no.5
• /
• pp.375-381
• /
• 1987

Rates for the aquation of trans-[Cr(tn)$_2Cl_2]^+$ and trans-[Cr(en)(tn)Cl$_2$]^+$ ions in aqueous acidic solution have been measured by spectrophotometric method at various temperatures and pressures. Activation volumes are negative and lie in the limited range -1.7 ∼ -2.9cm$^3$mol$^{-1}$ or the complex ions. Activation entropies and activation compressibility coefficients are small negative values. From the results of thermodynamic parameters, it can be inferred that the aquation of the complex ions proceed through an associative interchange(Ia) mechanism. Furthermore, the information on possible transition state structure and reaction paths can be obtained by considering total stabilization energy of the hypothetical intermediates within the framework of angular overlap model. It is found that the theoretically predicted mechanism is consistent with the experimentally observed results.

• Journal of Fashion Business
• /
• v.14 no.4
• /
• pp.161-173
• /
• 2010

This study aims to examine for efficient production methods of custom-tailored clothing and application of 3D virtual clothing system in custom-tailored clothing market, by producing and analyzing both real clothing and 3D virtual clothing. For this study, a middle-aged woman is selected as the subject figure and one-piece is selected as the experimental clothes item. In real clothing, I conducted the wearing evaluation for experts and the subject figure. And In the virtual clothing, I conducted the wearing evaluation with i-Designer using 3D virtual clothing on simulation program. There are some differences between the data from body scanning and the real body size. In the custom-tailored clothing market in which the fitness is important, the research which measures the more exact data is needed. And in the case of complicate design, the functions which measure the activity and the fitness variously and correct the parts of curves are needed. This study experiments the availability of application of 3D Virtual Clothing System in custom-tailored clothing market by selecting one-piece as the experimental clothes item. So the follow-up studies for the other designs and fabrics are needed. Also, if the studies for checking the clothes pressure, the amount of composure, the space between skin and clothing when the virtual model wearing clothes is walking or shaking his arms are proceeding, then 3D virtual clothing System is applicable in custom-tailored clothing market. But there are some restrictions and lack of education in virtual clothing System yet, and it makes hard for workers in clothing market to use it in real production. However, 3D virtual clothing System will be practical in real market if there would be more research on its usability and practicality, and workers in clothing market can be easily educated on techniques of 3D virtual clothing system.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.38 no.6
• /
• pp.896-912
• /
• 2014

This study analyzed the reality of avatar size when it was automatically changed by different height and waist circumference inputs. This study focused on analyzing 22 of 28 avatar parts created by the 3D Clo virtual fitting program, based on the height and 'waist circumference of 2,247 woman samples from the $6^{th}$ Size Korea survey data. The 'waist back L'. and 'bishoulder L'. of the avatars were shorter than the bodies; however, the avatars' 'waist H'. and 'arm L'. were longer. Differences between the avatar and body increased in the taller groups. The body proportion of tall avatars was more distorted than small avatars. There were also some exaggerations in some circumferences. The 'bust C'. of the avatar was larger in the group with thin upper torsos; however, the 'hip C'. and 'upper arm C'. were larger in the group with thick upper torsos. The avatar torso silhouette of each somatotype was not representative of the real body silhouette as the 'hip C'. and 'bust C'. always increased together.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.3
• /
• pp.407-413
• /
• 2023

The purpose of this study is to provide basic information about various methods to easily affix unique embroidery effects to clothes due to the current expansion of digital fashion technology. A comparison of design techniques using virtual and real clothing was used to show the visual expression of embroidery designs. Actual embroidery motifs were created using a computer embroidery machine, DTP embroidery motifs were made by utilizing digitalization techniques, and digital motifs were produced. Then patch pocket type T-shirts were produced using each embroidery technique to compare the visual expression effects on clothing. The results of this comparison are as follows: for real clothing color (3.5), texture (4.0), gloss (3.8), and thickness (3.5). It was found that the color and thickness of the embroidery floss was visually sufficiently show the design texture and gloss. In terms of the embroidery design on virtual garments, the resutls of color (3.8), texture (4.3), gloss (3.9), and thickness (3.6) showed a high degree of similarity to the non-virtual results, confirming that digitized embroidery motifs are also a tool that can fully realize unique embroidery effect.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.17 no.2
• /
• pp.223-237
• /
• 2015

This study is to compare the pattern making methods of men's jeans and to analyze sizes of parts while also evaluating the appearance and fit according to a 3D virtual garment simulation. Five types of patterns are selected for the analysis. For the appearance evaluation, the study conducted a virtual clothing simulation, created a perspective drawing, and applied Clothing pressure to each test outfit. First, according to the pattern comparisons, A and D had the shortest crotch length, while B had the longest; B had the narrowest crotch width, while C had the widest; C had the greatest waist circumference, and B had the smallest; C had the greatest knee and hem circumference, while E had the smallest. Second, according to the appearance evaluation, E pants had the highest rating overall for the waist, crotch, knee, and hem comfort; A pants had the highest rating for the yoke line end and placement; and C pants had the highest rating for the side seam line. According to the correlation analysis, ease of the waist, hips, hem and thighs were important factors (in that order) in determining the overall appearance of the jean pants.

• Journal of Fashion Business
• /
• v.27 no.4
• /
• pp.101-114
• /
• 2023

This study aimed to create globally acceptable Hanbok-inspired work uniforms, by developing practical designs and providing useful resources for incorporating Hanbok characteristics into office attire. First, to establish the elements that the Hanbok work uniform should have, the definition and characteristics of service clothes and preferences for the process of modernization of traditional Hanbok were reviewed through a review of the preceding studies. For the Hanbok work uniform design, a total of 4 pieces, 2 for each male and female, were planned, a schematic diagram was created, and the design was modified after evaluation by fashion design experts. I made a pattern of the modified design with a CAD program, imported it into CLO 3D to produce a virtual costume, and confirmed the final design draft. Work uniform design has symbolism, functionality, and aesthetics as its characteristics. The functionality of the Hanbok work uniform designed in this study is suitable for the season, and it was designed to increase the efficiency of work when worn for a long time. The design was focused on the development of materials and patterns in consideration of comfort and activity. The esthetic nature of hanbok-inspired work clothes was intended to reveal details that could highlight the silhouette of the human body and reflect the beauty of hanbok.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.47 no.1
• /
• pp.123-136
• /
• 2023

To develop smart sportswear capable of measuring biometric data, we created a close-fitting pattern using two- and three-dimensional (2D and 3D, respectively) methods. After 3D virtual fitting, the tightness of each pattern was evaluated using image processing of contact points, mesh deviation, and cross-sectional shapes. In contact-point analysis, the 3D pattern showed high rates of contact with the body (84.6% and 93.1% for shirts and pants, respectively). Compared with the 2D pattern, the 3D pattern demonstrated closer contact at the lower chest, upper arm, and thigh regions, where electrocardiography and electromyography were primarily carried out. The overall average gap was also lower in the 3D pattern (5.27 and 4.66 mm in shirts and pants, respectively). In the underbust, waist, thigh circumference, and mid-thigh circumference, the cross-section distance between clothing and body was showed a statistically significant difference and evenly distributed in the 3D pattern, exhibiting more closeness. The tightness and fit of the 3D smart sportswear sensor pattern were successfully evaluated. We believe that this study is critical, as it facilitates the comparison of different patterns through visualization and digitization through 3D virtual fitting.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.48 no.4
• /
• pp.744-755
• /
• 2024

This study analyzes the characteristics, product dimensions, and ease of haenyeo suits to inform their reproduction. Large, medium, and small haenyeo suits were collected from four manufacturers in Jeju, and their components, cut styles, product dimensions, and ease were analyzed. In the current haenyeo suit design, the upper suit has a collar and a crotch, while the lower suit has a high rise with a gusset. Additionally, there are darts behind the neck in the upper suit and behind the knees in the lower suit. Haenyeo suits have a three-dimensional shape that accommodates the postures needed for haenyeo's underwater activities. The upper suit is finished with a cuffed hem or an uncuffed side seam with a diagonal or stepped cut. The lower suit is cut and sewn with the waist and hem at right angles or with the hem diagonal to the waistline. Haenyeo suit dimensions vary between manufacturers, and the models' body dimensions show that there is little or no ease. In conclusion, haenyeo suit manufacturers currently use the same components; however, they differ in terms of cut styles, sewing methods, dimensions, and designs.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2002.05a
• /
• pp.47-50
• /
• 2002

선반건조 일정계획에 있어서 탑재 공정은 전체 생산일정 계획 중 선박 한 척에 대한 계획의 시발점이 되며, 병목현상 등을 유발하여 다른 일정에 가장 큰 영향을 주게 되는 공정이다. 최근 많은 조선소에서 하나의 Dock 내에서 두 착 이상의 배를 동시에 건조하는 tandem 방식을 택하고 있어 dock 내의 한정된 Crane 의 개수와 Crane의 Capacity, 공수 등의 자원, 그리고 작업환경에서 일어날 수 있는 여러 가지 변수들을 제대로 고려하지 못 했을 시에는 일정의 차질과 Dock의 회전율을 떨어트리게 한다. 본 논문에서는 가상공간에 하나의 Dock 를 만들어서 일정계획에서 작성한 Network를 사용하여 실제 작업하게 해서 그 Network가 현장에서의 최적한가를 점검하게 하고 현장에서 수정하는 작업을 줄이게 하는 것의 방법으로 simulation을 개발하였다.