• The KIPS Transactions:PartA
• /
• v.14A no.3 s.107
• /
• pp.167-172
• /
• 2007

VM(Virtual Machine) can be considered as a software processor which interprets the machine code. Also, it is considered as a conceptional computer that consists of logical system configuration. But, the execution speed of VM system is much slower than that of a real processor system. So, it is very important to optimize the code for virtual machine to enhance the execution time. Especially the optimizer for a virtual machine code on embedded devices requires the highly efficient performance to the ordinary optimizer in the respect to the optimized ratio about cost. Fundamentally, functions and basic blocks which influence the execution time of virtual machine is found, and then an optimization for them nay get the high efficiency. In this paper, we designed and implemented the optimizer for the virtual(or abstract) machine code(VMC) using profiling. Firstly, we defined the profiling information which is necessary to the optimization of VMC. The information can be obtained from dynamically executing the machine code. And we implemented VMC optimizer using the profiling information. In our implementation, the VMC is SIL(Standard Intermediate Language) that is an intermediate code of EVM(Embedded Virtual Machine). Also, we tried a benchmark test for the VMC optimizer and obtained reasonable results.

• Journal of IKEEE
• /
• v.23 no.1
• /
• pp.80-90
• /
• 2019

Even though Non-Volatile Memory (NVM) is used for data storage, a page table should be built to access data in it. And this observation leads us to the Persistent Page Table (PPT) scheme that keeps the page table in NVM persistently. By the way, processors have different page table structures and really operational page table cannot be built without virtual and physical addresses of NVM. However, those addresses are determined dynamically when NVM storage is attached to the system. Thus, the PPT should have system-independent and also address-independent structure and really working system-dependent page table should be built from the PPT. Moreover, entries of PPT should be updated atomically and, in this paper, we describe the design of PPT that meets those requirements. And we investigate how file systems can decrease the journaling overhead with the swap operation, which is a new operation created by the PPT. We modified the Ext4 file system in Linux and experiments conducted with Filebench workloads show that the swap operation enhances file system performance up to 60%.

• Journal of KIISE
• /
• v.44 no.8
• /
• pp.767-773
• /
• 2017

In a distributed system environment, such as a cloud database, the tail latency needs to be kept short to ensure uniform quality of service. In this paper, through experiments on a Cassandra database, we show that long tail latency is caused by a lack of memory space because the database cannot receive any request until free space is reclaimed by writing the buffered data to the storage device. We observed that, since the performance of the storage device determines the amount of time required for writing the buffered data, the performance degradation of Solid State Drive (SSD) due to garbage collection results in a longer tail latency. We propose a garbage collection synchronization technique, called SyncGC, that simultaneously performs garbage collection in the java virtual machine and in the garbage collection in SSD concurrently, thus hiding garbage collection overheads in the SSD. Our evaluations on real SSDs show that SyncGC reduces the tail latency of $99.9^{th}$ and, $99.9^{th}-percentile$ by 31% and 36%, respectively.

• Journal of Digital Convergence
• /
• v.19 no.11
• /
• pp.365-371
• /
• 2021

In this study, The Virtual Power Plant (VPP) solution platform considered in this study minimizes the cost and investment risk associated with the construction of power generation and transmission facilities. In addition, it includes a Demand Response (DR) program operation function to meet consumers' electricity demand. With the introduction of VPP, it is possible to provide more eco-friendly and efficient power by responding to changes in consumer load in real time through existing generators and DR programs without large-scale facility investment in power generation and transmission/distribution sectors. In order to link the communication device to the solar power and ESS linkage device, it is necessary to transmit data in the control/state between the device device and the edge system and develop an IoT device and interworking platform (OneM2M).

• The KIPS Transactions:PartD
• /
• v.10D no.1
• /
• pp.117-124
• /
• 2003

The system implemented in this paper partitions and stores specimen data captured by a light microscope on distributed or parallel systems. Users ran observe images on computers as we use a physical microscope. Based on the client-server computing model, the system consists of client, coordinator, and data manager. Three components communicate messages. For retrieving images, we implemented the client program with necessary functions for educational applications such at image mark and text annotation, and defined the communication protocol. We performed the experiment for introducing a tape storage which stores a large volume of data. The experiment results showed performance improvement by data partitioning and indexing technique.

• Journal of agriculture & life science
• /
• v.51 no.1
• /
• pp.205-212
• /
• 2017

This study aimed to output augmented reality display using chroma-key so that power tiller simulator can be operated smoothly while wearing the head mounted display. In this paper, we propose a chroma-eliminating image filtering method. Experimental results show that the maximum and minimum values of hue, saturation and intensity were 0.52, 0.153, 0.57, 0.16, 1, and 0.12, respectively. A keypad was used to set the initial position of augmented reality adjusted with the front, back, top, bottom, left, and right buttons. The initial position value is always maintained and managed according to the trailer attachment and detachment. Finally, we show that the augmented reality merged with virtual image and the acquired image of operation device using coordinate values obtained from the HMD and the position tracking sensor as relative coordinates in Unity program that is the ultimate game development platform.

• The KIPS Transactions:PartA
• /
• v.13A no.7 s.104
• /
• pp.607-614
• /
• 2006

The checkpointing schemes should reduce the process delay through managing the checkpoints of each node to fit the network load to enhance the performance of the process running on the cluster system that write the checkpoints into its global stable storage. For this reason, a cluster system with single IO space on a distributed RAID chooses a suitable checkpointng scheme to get the maximum IO performance and the best rollback recovery efficiency. In this paper, we improved the striped checkpointing scheme with dynamic stripe group size by adapting to the network bandwidth variation at the point of checkpointing. To analyze the performance of the multi striped checkpointing scheme, we applied Linpack HPC benchmark with MPI on our own cluster system with maximum 512 virtual nodes. The benchmark results showed that the multistriped checkpointing scheme has better performance than the striped checkpointing scheme on the checkpoint writing efficiency and rollback recovery at heavy system load.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6A
• /
• pp.517-525
• /
• 2005

iSCSI(Internet Small Computer System Interface) is a block-oriented storage access protocol that enables a user to recognize a remote storage as their own local block device through general TCP/IP networks. Since iSCSI uses a standard ethernet switch and router for this kind of access, it can not only be applied to ethernet technologies, but can also be used to create a storage networking system without any distance restrictions that can equally be applied to a wireless network environment. Accordingly, focusing on this applicability, this paper presents an alternative approach to overcome the limited storage space of mobile devices based on the iSCSI initiator driver, which was originally designed for wired networks. Additionally, its potential with a wireless network is also evaluated.

• Journal of Korea Multimedia Society
• /
• v.13 no.9
• /
• pp.1272-1284
• /
• 2010

As the mobile computers are becoming powerful and are used like general-purpose computers, operating systems for mobile computers also require swap system functionality that utilizes main memory efficiently. Flash memory is widely used as storage device for mobile computers but current linux swap system does not consider flash memory. Swap system is tightly related with process execution since it stores the contents of process in execution. By taking advantage of this characteristics, in this paper, we study a new linux swap system called PASS(Process-Aware Swap System), which allocates the different flash memory blocks to each process. Trace-driven experimental results show that PASS outperforms existing linux swap system with existing garbage collection schemes in terms of garbage collection cost.

• The KIPS Transactions:PartD
• /
• v.11D no.1
• /
• pp.11-22
• /
• 2004

As random access memory chip gets cheaper, it becomes affordable to realize main memory-based database systems. Consequently, reducing cache misses emerges as the most important issue in current main memory databases, in which CPU speeds have been increasing at 60% per year, compared to the memory speeds at 10% per you. In this paper, we design and implement a main-memory database system for real-time mobile GIS. Our system is composed of 5 modules： the interface manager provides the interface for PDA users； the memory data manager controls spatial and non-spatial data in main-memory using virtual memory techniques； the query manager processes spatial and non-spatial query : the index manager manages the MR-tree index for spatial data and the T-tree index for non-spatial index : the GIS server interface provides the interface with disk-based GIS. The MR-tree proposed propagates node splits upward only if one of the internal nodes on the insertion path has empty space. Thus, the internal nodes of the MR-tree are almost 100% full. Our experimental study shows that the two-dimensional MR-tree performs search up to 2.4 times faster than the ordinary R-tree. To use virtual memory techniques, the memory data manager uses page tables for spatial data, non- spatial data, T-tree and MR-tree. And, it uses indirect addressing techniques for fast reloading from disk.