• Science of Emotion and Sensibility
• /
• v.26 no.1
• /
• pp.65-78
• /
• 2023

Aircraft are representative of human-machine systems. There is a delay between the human operation and the completion of the machine operation such as when the machine starts to operate and when the force is transmitted to the machine and completed. Time perception is an important component of timing tasks and is known to be affected by the anxiety associated with high arousal. This research verified the impact of weather, flight, and time conditions on the anxiety and time perception of in-service pilots in a virtual reality area. Weather conditions were divided into visual flight weather conditions and very low visibility conditions. Experiments 1 and 2 were performed with different flight and time conditions. In Experiment 1, time perception was measured by employing a button added to the control rod in the scenario of hovering and level flight with relatively little transformed in momentum and little delay. In Experiment 2, time perception was measured in the procedure of naturally taking off the helicopter by employing only the control stick in a takeoff scenario where there was a lot of transformation in momentum and a lot of delays. As a result of the experiment, it was reported that anxiety and heart rate increased in very low visibility conditions In particular, among all flight conditions in Experiments 1 and 2, it was reported that time was overestimated in the scenario of increased anxiety. This outcome can lead to overestimation of time under the impact of anxiety and failure of the timing task, which may lead to challenges in maneuvering and possibly lead to accidents.

• Tunnel and Underground Space
• /
• v.33 no.4
• /
• pp.281-298
• /
• 2023

Continuous research efforts are being devoted to unmanned mobile platforms for lunar exploration. There is an ongoing demand for real-time information processing to accurately determine the positioning and mapping of areas of interest on the lunar surface. To apply deep learning processing and analysis techniques to practical rovers, research on software integration and optimization is imperative. In this study, a foundational investigation has been conducted on real-time analysis of virtual lunar base construction site images, aimed at automatically quantifying spatial information of key objects. This study involved transitioning from an existing region-based object recognition algorithm to a boundary box-based algorithm, thus enhancing object recognition accuracy and inference speed. To facilitate extensive data-based object matching training, the Batch Hard Triplet Mining technique was introduced, and research was conducted to optimize both training and inference processes. Furthermore, an improved software system for object recognition and identical object matching was integrated, accompanied by the development of visualization software for the automatic matching of identical objects within input images. Leveraging satellite simulative captured video data for training objects and moving object-captured video data for inference, training and inference for identical object matching were successfully executed. The outcomes of this research suggest the feasibility of implementing 3D spatial information based on continuous-capture video data of mobile platforms and utilizing it for positioning objects within regions of interest. As a result, these findings are expected to contribute to the integration of an automated on-site system for video-based construction monitoring and control of significant target objects within future lunar base construction sites.

• Journal of Korea Multimedia Society
• /
• v.5 no.6
• /
• pp.674-682
• /
• 2002

Nowadays economic and commercial businesses have been increased because of the Internet. As a result of this, electronic commerce is becoming one of the most Interesting topic of discussion. Electronic commerce is equal to a real market, only the place of business is the imaginary space supported by the Internet. There are a few conditions to consider, making electronic commerce work safely. The electronic commerce should be connected by a substantial system and an on-line Protocol. There are some conditions needed for information security, authentication, and payment by electronic currency etc. Although there are many kinds of existing systems, which create services successfully, further research for security is required. Therefore, this paper suggests an authenticated Agent management, which offers more convenience and security than before. Also, this paper shows many authenticated methods for a management system. An Agent that is one of interesting things to study can handle information problems and works related to electronic commerce.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.3
• /
• pp.680-690
• /
• 2011

To support asynchronous collaboration among remote users, collaborative applications provide collaboration services and environment through virtual workspaces. In general, collaborative applications support collaboration based on desktop-based personal computers, using the features such as resource sharing or asynchronous communication among users. Unfortunately, since those applications mainly run on personal computers, they do not easily support collaborative works in various places. In this paper, we describe the development of smartphone collaborative application which provides effective collaboration facilities like resource sharing through various types of workspaces or group communication, communicating with a WebDAV-based collaboration server. The developed application provides users with high accessibility through multi-touch/touch-slide based user-interfaces in mobile environment. To support effective communication with a collaboration server, we also present a WebDAV-based collaboration library using a collaboration protocol designed to analyze easily the responses from the collaboration server.

• Archives of design research
• /
• v.18 no.3 s.61
• /
• pp.85-94
• /
• 2005

Most of product designers use 3D CAD system as a inevitable design tool nowadays and many new products are developed through a concurrent engineering process. However, it is very difficult for novice designers to get the sense of reality from modeling objects shown in the computer screens. Such a intangibility problem comes from the lack of haptic interactions and contextual information about the real space because designers tend to do 3D modeling works only in a virtual space of 3D CAD system. To address this problem, this research investigate the possibility of a interactive quantified structure simulation for product design using AR(augmented reality) which can register a 3D CAD modeling object on the real space. We built a quantified structure simulation system based on AR and conducted a series of experiments to measure how accurately human perceive and adjust the size of virtual objects under varied experimental conditions in the AR environment. The experiment participants adjusted a virtual cube to a reference real cube within 1.3% relative error(5.3% relative StDev). The results gave the strong evidence that the participants can perceive the size of a virtual object very accurately. Furthermore, we found that it is easier to perceive the size of a virtual object in the condition of presenting plenty of real reference objects than few reference objects, and using LCD panel than HMD. We tried to apply the simulation system to identify preference characteristics for the appearance design of a home-service robot as a case study which explores the potential application of the system. There were significant variances in participants' preferred characteristics about robot appearance and that was supposed to come from the lack of typicality of robot image. Then, several characteristic groups were segmented by duster analysis. On the other hand, it was interesting finding that participants have significantly different preference characteristics between robot with arm and armless robot and there was a very strong correlation between the height of robot and arm length as a human body.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2023.04a
• /
• pp.7-7
• /
• 2023

Currently, the main technologies of various fourth industries are big data, the Internet of Things, artificial intelligence, blockchain, mixed reality (MR), and drones. In particular, "digital twin," which has recently become a global technological trend, is a concept of a virtual model that is expressed equally in physical objects and computers. By creating and simulating a Digital twin of software-virtualized assets instead of real physical assets, accurate information about the characteristics of real farming (current state, agricultural productivity, agricultural work scenarios, etc.) can be obtained. This study aims to streamline agricultural work through automatic water management, remote growth forecasting, drone control, and pest forecasting through the operation of an integrated control system by constructing digital twin data on the main production area of the nojinot industry and designing and building a smart farm complex. In addition, it aims to distribute digital environmental control agriculture in Korea that can reduce labor and improve crop productivity by minimizing environmental load through the use of appropriate amounts of fertilizers and pesticides through big data analysis. These open-field agricultural technologies can reduce labor through digital farming and cultivation management, optimize water use and prevent soil pollution in preparation for climate change, and quantitative growth management of open-field crops by securing digital data for the national cultivation environment. It is also a way to directly implement carbon-neutral RED++ activities by improving agricultural productivity. The analysis and prediction of growth status through the acquisition of the acquired high-precision and high-definition image-based crop growth data are very effective in digital farming work management. The Southern Crop Department of the National Institute of Food Science conducted research and development on various types of open-field agricultural smart farms such as underground point and underground drainage. In particular, from this year, commercialization is underway in earnest through the establishment of smart farm facilities and technology distribution for agricultural technology complexes across the country. In this study, we would like to describe the case of establishing the agricultural field that combines digital twin technology and open-field agricultural smart farm technology and future utilization plans.

• Journal of Digital Convergence
• /
• v.10 no.10
• /
• pp.333-338
• /
• 2012

Human resource management is bringing the various changes with the IT technology. In particular, if HRM is non-scientific method such as group management, physical plant, working hours constraints, personal contacts, etc, the current enterprise human resources management(e-HRM) appeared in the individual dimension management, virtual workspace (for example: smart work center, home work, etc.), working time flexibility and elasticity, computer-based statistical data and the scientific method of analysis and management has been a big difference in the sense. Therefore, depending on changes in the environment, companies have introduced a variety of techniques as RFID card, fingerprint time & attendance systems in order to build more efficient and strategic human resource management system. In this paper, time and attendance, access control management system was developed using multi camera for 2D and 3D face recognition technology-based for efficient enterprise human resource management. We had an issue with existing 2D-style face-recognition technology for lighting and the attitude, and got more than 90% recognition rate against the poor readability. In addition, 3D face recognition has computational complexities, so we could improve hybrid video recognition and the speed using 3D and 2D in parallel.

• Radiation Oncology Journal
• /
• v.10 no.2
• /
• pp.137-145
• /
• 1992

Three-dimensional dose calculations based on CT images are fundamental to stereotactic radiosurgery for small intracranial tumor. In our stereotactic radiosurgery program, irradiations have been performed using the 6 MV photon beam of linear accelerator after stereotactic CT investigations of the target center through the beam's-eye view and the coordinates of BRW frame converted to that of radiosurgery. Also we can describe the tumor diameter and the shape in three dimensional configuration. Non-coplanar irradiation technique was developed that it consists of a combination of a moving field with a gantry angle of $140^{\circ}$, and a horizontal couch angle of $200^{\circ}C$ around the isocenter. In this radiosurgery technique, we provide the patient head setup in the base-ring holder and rotate around body axis. The total gantry moving range shows angle of 2520 degrees via two different types of gantry movement in a plane perpendicular to the axis of patient. The 3-D isodose curves overlapped to the tumor contours in screen and analytic dose profiles in calculation area were provided to calculate the thickness of $80\%$ of tumor center dose to $20\%$ of that. Furtheremore we provided the 3-D dose profiles in entire calculation plane. In this experiments, measured isodose curves in phantom irradiation have shown very similiar to that of computer generations.

• Archives of design research
• /
• v.19 no.5 s.67
• /
• pp.55-64
• /
• 2006

As digital systems were introduced to automotive design in the mid 1980s, the design process has adopted many digital programs to save time compared to the conventional hand drafting. Digital technology was introduced not only to satisfy the reeds of the global environment, as the number of automobiles exported to many different parts of the world has increased, but also to save time and effort in developing several models of quality automobiles. Therefore, every automotive manufacturer in the world has expanded its virtual reality(VR) studio to establish visualization systems that visualize automobiles in the actual size and a co-operation system that enables simultaneous feedback from all of its design studios around the world. Unlike the existing design reviewing methos, the new improved feedback system is assessed as a reasonable method to evaluates and understand how the automobiles are actually manufactured in simulation. It is especially helpful when advanced products and concept cars require fast results. Other strengths of the new system include shorter development period, cost efficiency, no more manual labor, various designs within a short period of time, and realistic visualization of concepts. Large-scale products, including automobiles, need to be projected in the actual size and high clarity through the Power-wall System and are examined in a virtual space called a Cave. Therefore, it took much time to establish digital infrastructure. An infrastructure would constantly require system improvement and performance enhancement, but it is certain that now is the right time for the take-off to utilizing the strengths of digital design and improve the weaknesses. In this respect, this study provided an understanding of the importance of digital design based on digital reinforcements and examined an effective utilization of digital technology for an efficient development of automobiles in the future.

• Journal of the Korean Society for Library and Information Science
• /
• v.41 no.4
• /
• pp.93-111
• /
• 2007

The Internet is now an integral part of the everyday lives of a majority of people. Web users are becoming increasingly skeptical of the information and services offered online. They are demanding web sites that offer credible information. This study focused on what features of web sites affect the perception of web credibility. For this purpose, I took the responses from 648 people and extracted 49 factors that affect web credibility. I placed the individual factors - the specific questions asked in the survey - into one of four categories expertise. trustworthiness, ads and other and calculated the means for each of the 49 factors. As a result, 29 out of 49 factors increase the Perceptions of credibility and 20 factors decrease the web credibility. Sites with frequently update. the credentials of authors, strict content guides, search capabilities, clear connections to the real world fared good in credibility. Technical problems such as broken links, site sown, or typographical errors were rated the most negative on this scale On the other end of the scale, a domain name that ends in' .org' or' .or.kr' caused little change in perception of credibility.